How to Connect to a Raspberry Pi Directly with an Ethernet Cable
ฝัง
- เผยแพร่เมื่อ 6 ม.ค. 2016
- How to Connect to a Raspberry Pi Directly with an Ethernet Cable
Ethernet is the fastest and most reliable way to connect to your Pi. You can set this up in just a few steps and never get disconnected from network time outs or low bandwidth on your network. You can access your Pi without even being on a network. If you travel with your Pi, all you need is a laptop and an ethernet cable to connect to your Pi!
See the full tutorial here: www.circuitbasics.com/how-to-...
Check out the Circuit Basics blog for articles and tutorials on the Raspberry Pi, Arduino and other DIY electronic projects! www.circuitbasics.com
Facebook: / circuitbasic
Twitter: / circuitbasics
Instagram: / circuitbasics - วิทยาศาสตร์และเทคโนโลยี
So....in order to connect to the pie over direct ethernet connection, you have to already have network access to it?
Is there any way to connect directly to it without a network?
Thanks, worked perfectly on my two Raspberry Pi 3's.
thanks a lot for your tutorial !
used this tutorial. love it. thanks.
This worked for me! Thanks!
I have a Pi 2
Is there an advantage using ethernet over a PL2303 serial over USB connection? I would expect higher speeds with ethernet, however will the incremental speed make a difference in a text console environment?
thanks bro this helped me
Also do i have to edit the command text file with the IP= text? Or should it not have any ip= at the end? thank you.
I have created an instrumentation control app on my RPi3 that runs as an xTerm. When I use Putty on my Windows desktop to run the app, all the line drawing characters are shown a garbage characters and the function keys don't work. I have tried a bunch of config changes in Putty with no success. Any suggestions as to what to change? Either in Windows or in my RPI3 app?
1 - Should the laptop be connected via a crossover cable as well as the Pi? Or should the laptop be on wifi only for this?
handy thanks! ^^
thanks it work...
if in windows can't ping "raspberrypi.local" try install Bonjour Print services for Window v2.0.2. The "raspbeerypi.local" command work for me after installing Bonjour
hello, i do i resolve multiple ip addresses showing as Raspberry pi Foundation (Manufacturer)
Thanks !
I've received my Raspberry Pi 400 yesterday. My ethernet connection does not work out of the box I am new to Linux. This tutorial would fix my ethernet issue? any thoughts? I am trying to get connected to the internet via ethernet! Awesome tutorial! thanks!
I only have Local Area Connection and Wi-Fi options displayed on the network screen. Is there a way to fix that?
i have the same issue! help
do i need a cross over Ethernet cable or a standard Ethernet cable ??
The Etherenet cable should also be plug directly from the Pi to the laptop and not be in the router?
This video helped me alot. How do I know that the raspberry pi 4 is directly connected to PC. I'm using mine for steam link, and since doing this the speeds are much better but there's still occasional latency. I didn't think there would be ANY latency connected directly to PC with ethernet.
Thanks a million time
dude, how do i know my host name/ IP address to connect to RPi via putty in the 1st place.
+Aquib Rifath Nadaf scan your local network with an IP scanner like Advanced IP Scanner - www.advanced-ip-scanner.com/?.ILx7q_x5Rr2EIgDYGQo5WA.0&A%2F%2Fwww.google.com%2F
I tried this, I cant find my pi ip address to get into putty.....When I connect via Ethernet it comes up as unidentified network???
Type into PuTTY "raspberrypi.local" for the hostname and make sure Port 22 is typed.
The default login is "pi" and the default password is "raspberry"
it doesnt work
worked for me thanks!
can you teach us how to use openCv with raspbian and picamera ou usb cam ?
D'oh i am a newbie Pi owner and want to know how to connect my pi to my laptop screen. Your guide is ok, but you are already connected with your Pi. I downloaded putty.
BUT 3:36 you say "open the Pi" how can i open the pi if it is not connected to my computer?Also with the new pi 2. There is no log in, i do not have to enter a password or username. Please HELP thank you.
+S Gale (SGHD) you right, i can't connect too
How did you get it to work?
i'm trying to connect my laptop to rassberri with just lan cable and without router because i don't have one. so i just configured static ip in both the devices and tried to setup network between them.it appears that network have been establised but when i try to ping(to check whether they are able to communicate or not) my windows laptop from rassberri pie then it is not able to ping but when i ping my rassberri pie from laptop it ping successfully.My real problem is actually that i am not able to ssh from the laptop to rassperri pie through ethernet .the description about pinging i gave just because i thought it will be related to same problem because of which i cannot ssh from laptop to rassberri pie,and that the ping description may help you to find the solution to my problem..please help me to fix my problem,and be able to access my rassberri from laptop
plz say me why im getting network error and connection timeout
How did you use PuTTY to login to the Pi????
That's why I'm here.
I know I'm a bit late, but I think anyone else coming here for help might find this useful. You can login to the pi using putty by putting in raspberrypi as the host name
cat /etc/resolv.conf dose not work for me. When I enter that command the terminal just opens a new command line. I tried adding sudo in front to no avail.
Would this work with nanopi neo 2?
hey it is possible connect raspberry pi b+ only via usb? i don't want connect raspberry pi Ethernet cable
Hello
It worked in the first time then in my second time trying to connect it kept giving me network timeout on both putty and vnc viewer and i cant even ping to my pi
What is wrong ??
hi I use raspberry pi 3 and I connect through a tplink router bit after 1 day working fine now it not connect and shows error "connection time out " and also "connection refused "..please help me and now in my router does not show up of raspberry pi in DHCP client list and I also scan but in both case I not find my raspberry pi ip
for me i found recovery.mshome.net instead of raspberrypi.mshome.net
what should i do?
Can we do the same with desktops instead of laptops?
Works good while just connecting with the pc, but cannot access internet from Rpi as shown at 8:35. I am connected to the laptop via Wi-Fi and attached RPi via Ethernet cable. Any help would be appreciated.
Great, glad to hear you got it working!
+Kaustubh Dave If you connect to your RP via Ethernet then you should use a crossover cable and not a standard patch cable. On a crossover cable the receive and send pins are switched or else both network cards send and receive using the same pins on the cable. Connecting through WIFI negates that issue. You can also connect through a switch, hub or router using a regular patch cable but the point here was just using one network cable.
Finally if you use your PC as a hub for connecting to the internet then you should enable internet sharing on your PC.
SquirrelFromGradLife Yup, just one network cable, so maybe I should consider for the "enable internet sharing " option. Thanks anyway!
Kaustubh Dave You still need a crossover cable for a direct ethernet connection between your PC and the RP and yes you must enable internet sharing on your PC if it's connected to the internet in order for the RP to connect via your PC.
incomplete please add the inbetween steps of how the ip and auto config ip was used and where did the .10 in static ip came from when .6 was saved?
thanks bro
Guys, for all of you who are still stuck setting up the Raspberry Pi for the first time:
PuTTY SSH
Hostname: "raspberrypi.local"
Port: 22
Default login: "pi"
Default password: "raspberry"
Then you can get access to the command line :)
I tied raspberrypi.local but say Unable to open connection to raspberrypi.local
Host does not exist
I have raspberry pi 3
it was helpful for me to enable option "Enable/disable remote command line access to your Pi using SSH" www.raspberrypi.org/documentation/configuration/raspi-config.md
mrbobjrsrv OH MY GOSH!!!!!!! THANKS SOOOOOOOOOOOOOO MUCH!!!!!! I replaced the [raspberrypi].local with my host name and it worked, thanks soooooo much...
bro i found recovery.mshome.net instead of raspberrypi.mshome.net
what should i do?
raspberry.local isn't connecting to the Pi either...
how do i find the gateway of my pi? I have no monitor for the pi
Sir what will I do if my ethernet port is not available?? Please help
Thanks for the great video. Do you have any tutorial on how to connect directly from laptop to RPi for the first time. This video showed that you already had putty configured. I have brand new RPi and want to connect to it from my laptop for the first time. Any guidance will be much appreciated.
Hi, yes I do... This article (there's a video in the article too) will show you how to set up the Pi in headless mode without a monitor or keyboard for the first time. This should be what you're looking for I think:
www.circuitbasics.com/raspberry-pi-basics-setup-without-monitor-keyboard-headless-mode/
+Circuit Basics Thanks budy.
Circuit Basics My raspberry Pi network file shows a new keword instead of dhcp it shows manual. How can I set that up?? I think it is the updated version I couldn't find any tutorial for it. Can you help in this case?
If you do not know your RPi's ip address download Advanced IP Scanner or a simillar tool. Connect your pi to your computer with ethernet cable and power up your pi. Open Advanced IP Scanner and press the button with a C on it . Then press Scan and your pi will show in the list below with the IP address included.
So I have my Pi connected to my laptop. My network & sharing tells me I'm connected to an 'unidentified network' via LAN but Advanced IP scanner isn't detecting the Pi
What is the IP captured at 3.25
In your video, I assumed or I am sure the system is connected to both Wifi and Ethernet. The Ethernet IP is 169.254.81.7 and Wireless IP is 10.0.0.2 respectively to the system. So you can access the pi using Putty by using the IP 10.0.0.14 assigned by the Wifi router.
How can I see me
@@voxvox6063 its called a mirror
Ethernet IP address. On your screen it says "autoconfiguration IPv4 Address" But when i check mine it only says "IPv4 Address" Why? Is this the same?
WARNING THIS HAPPENED TO ME : This so cool but if i set up the two interfaces wlan0 and eth0 it occures that when i got to sudo apt-get install xrdp it ocurres a problem aparently with the web page... well i really don't know i'm a noob but i coulden't download the remote protocol so i looked in a forum an i saw a comment that was sayaing to disable one of the to interfaces in /etc/dhcpcd.conf and i did and it worked for me.
I still can't get my pi 3 WiFi to work and I'm with IT! Smh
When i downloaded putty i got putty key generator not putty configuration
hi, i want to configure my wifi lan and you didn't say from were should i get the ip address
Tamila Fali yeah
How to know what password to type ..while opening pi in putty..
Iam giving
pi
raspberry
But it's writting access denied....
What to do ?
Everyone who is having problems connecting!!!!
Set raspberry to dynamic ip
can we change ip adress of ethernet
i cant even login because the ethernet already unidentifies before it starts booting. anyone please help
i cant connect to putty..
DAMN!!! you sound like tony stark
SOMEONE PLEASE HELP IT JUST SAYS ERROR NETWORK REFUSED
so, i followed each step verbatim and now whenever i try to enter ssh i get a "session timed out" error and now i can't connect to my pi at all through my laptop when before the video i could at least connect wirelessly... im new to this so i have no clue what to do now...
Thank you for your very informative tutorial.
I believe,I followed all your steps but I still cannot find my PI IP address.
I formatted my SD card ; I copied the file 2017-09-07-raspbian-stretch-lite.img into SDcard ;
I created and copied an empty file called SSH
. ;I connected my laptop (Win 10) to pi via a straight network cable.
I tried to set my laptop Ethernet adapter to a static IP address 192.168.137.1 ( enable sharing )
but I still cannot find my pi IP address; I would appreciate if you could advise me how to find my pi IP address
www.raspberrypi.org/learning/software-guide/quickstart/
when I enter 10.0.0.14 in putty it shows connection time out
Csavier Kahlo so how do I find what I need for mine?
Csavier Kahlo I did man, it says timed out. I have enabled SSH for sure. I haven't got a clue what I did wrong.
it is not in the video, as seen by my and confirmed by the OP himself on this page.
You need a crossover ethernet cable for that to work.
No need for a crossover cable, any old Ethernet cable will work
i can ping it but cant connect to it...
Sir please tell it's urgent
it dont works for me
Wow the right bottom corner tells me that u re one of the UNPUXHost.exe victims.
(Windows 10 logo)
Hiii
It's don't show autoconfiguration IPv4 Address
Why...?
type ipconfig /all
This was useless. I did what you said in the video but for some reason it defined it wrong and now I am not able to acces the internet from the pi
Is there a way to revert back to the old ip?
th-cam.com/video/WBlXvGwkZa8/w-d-xo.html
Follow this easy tutorial :)
this tutorial is useless.. if im i dont already know how to "connect to my raspberry pi via Ethernet" why would you expect that i know how to use putty, or access the "gateway". The tutorial becomes usesless after that point.
You nailed it here. I have a pi rj45'd to my laptop that is wireless to a router. Thats all. Now the simple question for the umpteenth gabillion time is: How do I connect the pi to the wireless network that the laptop is on?
giantkilleroverunity you have to use a cross over cable, fair warning the are cashy
Joe Kolb both the Pc and RPi detects if it has a cross over Ethernet cable or not. So no need to have a cross over cable.
giantkilleroverunity the thing is that the RPi is connetcted to the wired connection to your Pc. No need to connect the RPi to the WiFi.
After you connected to the RPi you can set it up for WiFi. But you need to connect to the RPi first to enter AP name and password to the RPi for it to be able to connect to WiFi.
please clean up the audio. It sounds like you're using some processing that makes audio almost unintelligable
LOL
You failed to say what Ip address to put into Putty?? Your screen shows ipv4 10:0:0:6 then you enter a completely different one for Putty. If you're going to show people, You might want to explain yourself better. Going to a different tutorial!
Abc did you figure it out
Where you find an IP address of your RaPi? You find just an autoconfiguration. The numbers 10.0.0.14 were nowhere. :(
lol I was running into that same problem for a week. If you still have not resolved it reply back.
Yes I still didn't run it this way. It work to me just over a router.
Never make a guide, ever again.
This way need internet?(PLEASE SAY NO!!!)
Umm you just called windows 10 windows 8
Why don' t you people open your mouth enough to speak !!!
Dude slow down first of all how do you find raspberry ip?
That's too much work it's easier just to connect to the Wi-Fi
I rather just connect the damn Internet right into the pie and be good to go to butttt it's more complicated than that.
Definitely don't put anymore tutorials!! save us time and frustration!! Stick to Legos
There are much simpler ways to achieve what you are doing.
what ?
Hi, well if so why not tell us?
@@bakunincervantes4372 he doesnt know shit
thats why dont trust these kind of trolls
linux based...(-:
TIP = you can't "connect to a raspberry pi directly with an Ethernet cable" if you don't have an OS installed on it, SSH enabled, and know the IP address of the raspberry pi... this noob just shows you how to set a static IP using SSH
That was a waste of time! I don't get it! What did you do? I guess I'm an idiot! I thought you were going run your Raspberry Pi from your windows computer! If so why could you have shown that?
Don't waste your time, these meticulous and long steps can be done in a shorter, easier video. I know that a lot of these addresses will look the same, but it's not working anymore, screw this video
why do you feel shame to add voice?
your going toooooooooooooooooo fast
Ffs, how is anyone dropping any working os for Linux or this crap...
ditto and please take this guide down. it does not work anymore.