LED Conversion ONLY $20!!!!! | BANSHEE 350
ฝัง
- เผยแพร่เมื่อ 19 มี.ค. 2017
- LED Conversion ONLY $20!!!!! | BANSHEE 350
Cheap easy alternative to buying new headlight.
Lights...
amzn.to/3ts03u2
Guards for lights...
ebay.us/YMPa08
Wire connectors...
www.ebay.com/itm/5-Kit-3-Pin-W...
If you enjoyed, please comment, like and subscribe to my channel!
Thank you for watching!
Add me on Facebook and Instagram
Facebook: / atvcrazy91
Instagram: / atvcrazy91
Music is as follows...
Music provided by Marijn Stubenitsky.
Insta: / marijntjhu
Twitter(Dutch): / marijnstuben
Track - Watch Me Whip (and Nae Nae) Silento (Copyright Free Instumenal)
Link to track - • Watch Me Whip (and Nae...
Track 2
Music provided by TeknoAXE.
/ teknoaxe
www.reverbnation.com/teknoaxe
Track - Heavy Metal/Hard Rock
Link to track - • TeknoAXE's Royalty Fre...
Track 3
Music provided by Teknoaxe.
Track - Like a Ton of Bricks -- Industrial/Downtempo
Link to track - • Like a Ton of Bricks -...
Sparkle sound
• Video - ยานยนต์และพาหนะ
Nice! im gonna do this next to my banshee.
As I'm here at school watching your old videos out of pure boredom, I see a lot of people are having lots of trouble with these lights ! lol. my banshee and my uncles banshee works great with the lights.
Thanks man , and I appreciate the feedback. I've been trying to figure out why so many people have the issue of them blowing out. Mine have never had an issue. I think it has to do with the specific manufacturer of the light (they all look the same on eBay but the quality varies) or something to do with the voltage regulator/stator setup people run.
yeah my uncle his lights are not nearly as bright as mine. but they work.
Just got mine ordered. Thanks bro!!!
Awesome dude! Good luck with your install!
Man you got me laughing this morning with the whitey-tighties as the vise towel. Thanks man.
🙋🏽♂️Your awesome bro!! Soba made it!!!🇺🇸🇺🇸💯💯🙏🏽🙏🏽
Very nice, detailed install video! I had never used those Metri-pack or Weather-pack terminals before but I just got a good lesson on them redoing my new/old F-250 injector harness this week. We have those exact same round LED lights sitting on the shelf, been meaning to put them on our blue shee because my lady prefers the round style on her shee over the light bar like I have on mine. Buddy of mine used to run them and they are definitely a lot better than stock but not nearly as bright as the 12" bar for $30.
TrailBlogger yes even from your videos I can tell your light bar is super bright. thank you for the compliment man!
To run LEDs is it plug and play or do I need a DC conversion? Any help would be awesome. I hook my last set up just like this and they fried as soon as I took of and got high RPMs. So it’s got stock back on it lol but I really want the LEDs. Thank you!
I have yet to use mine at night.. I used a hacksaw to cut mine.. It took almost 2 hours.. Great video though its crazy how I can watch your videos and see your growth with every upload.. Remember I was here when you make it big.. Ha ha
Dude I love your channel too and we're both gonna make it big bro; I never forget those who have helped me.
Awesome build series. Im currently swapping a warrior 350motor into a raptor 660 frame. I like the color scheme you chose for the bike.
What!? That's a crazy hybrid build. Send me some pics and info if you can: michaelsabo350@gmail.com
I just ordered some 27w lights . Will my blaster handle 27w ? Thanks for the awesome video 👊
He's using underwear for a shop rag
Beau Marusa damn straight!
Does anyone know if when you have these you can put on the eye headlight covers?
Mike when cutting bolts like that put the nut on first cut round down corners with grinder or file then when u back nut off it straightens thread for ya
This is a great tip; thanks man! I actually learned this in the time since I've made this video and it works great🤘
Did you put the little red clips back in the connectors after you removed them?
I have both on the high beam lead
I need those extended J arms for my 89
I whish the link for the grates still worked, i cant find them anywhere
How aren't your lights flickering??
My banshee on start flicker and when higher rpms get brighter
i installed these. and they both went out within 10 minutes. did yours hold up? im not sure if my stator is blowing them or not.
Do you spoil quickly?? Is it better lit than original one?
Non of the link in your description is working can you fix them as I'm looking for the light Garde and connectors
Where can i see how it looks with the guards.
Wired these up like yours and regardless I can’t get one headlight to only come on at low beam. Not sure how you did though lol!
I want to do this on my Yamaha blaster but it has 5 wires and only 2 of them are the same as the lights what do I do?
Hi did you have Any issues with them
I literally just got those exact lights by luck on amazon
What front shocks are those?
What guard covers did you use? Link expired
Hey just wondering how these lights are holding up after one year running on the stock system? I don't feel like doing a DC conversion and yes it's probably better but I don't want the extra work after the build. Your thoughts are appreciated. Thanks!
Hey Todd! My lights are still running fine. Keep in mind I don't have many hours on my Banshee but I have revved it to the max many times and my light don't burn out. Hope this helps!
Do u have ur stater floated
Can you use oem headlight guards on the led headlights ?
I dont think so but I've never tried it; these guards are on Ebay very cheap and are made for the 4 inch work light.
Where did you get the Grates? Sorry, I just expanded the details and I see they were from Ebay. Thank you for your nice vid!
No worries bro! Thank you for the compliment!
Thanks for the video! So making sure you have a stock stator ? Wanted to add a led bar to my banshee with out adding a battery
Nice man I have those same underwear!
Lol thank you bro 👊
I have the same lights and made it fit it was running perfect however I was riding with them on and both just went out . Did that happen to you?
Yes, the stator power fluctuates and burns the LEDs out. With my bike i put a upgraded stator and a battery. Im running LEDs now with no problem.
So you day green wire goes with yellow or I am confused here sorry
Which rock covers did you buy for the lights?
aapstert7 I have the link in the description
did the high beam low beam feature you ran work? you didn't show in video.
It should work; I actually decided not to run it that way because some people were telling me that the lights were blowing out, so I'd rather not risk running all of the power to only one light. So for now, both lights stay running whether the switch is on high or low.
are the lights still working properly?
What did you search for the connectors, I typed it up an it keep showing the stock one. Thanks
All of the parts I ordered are in the description.
Here's the link for the connectors...
www.ebay.com/itm/5-Kit-3-Pin-Way-Sealed-Waterproof-Electrical-Wire-Connector-Plug-Set-US-Stock-/131980654032?hash=item1ebaa8f5d0:g:qAoAAOSwB09YDbos
Thanks
I put led lights on the front of my kid's Blaster, it blew them out. Had to get an ac to dc converter from ebay. Then they worked perfectly. Is the Banshee this way also?
David Hanna I’m doing this to my blaster too . What should I do ?
wind catchers?
I got these same ones, hooked them up and we’re fine at idle when I took of I fried them. Sooo is there a dc conversation you had to do?
What's up man. There are a couple of other guys that had the same problem. I think it depends on the output of your stator and which lights you got. There are so many of those 4" LED lights on eBay but they're made by different manufacturers.
I did not do a DC conversion, but it would solve your issue. At this time I don't have a video on that.
Looking to do this but unfortunately the parts list isn’t working I’m guessing because it was few years back. Any better info on parts? Found the lights can’t find the connectors?
did u end up doing it? im also looking into it
oem will a bad voltage regulator cause it
Yes, actually it can. One of the jobs of the voltage regulator is to take excess voltage and convert it into heat which then dissipates into the air. If it's not doing that, then the extra voltage could be going to your lights and blowing them out.
How are they holding up man? Like to know. Not spending $130 for 2 lights.
Nice, got the same ones on mine. Did you go for the spot or the flood version?
These did not specify: they appear to be flood lights. The video doesn't do them justice; they're pretty bright. I'm curious to see what they look like with the guards on.
Thats for sure, I tried to take a video as well to show my Facebook group and it looked like they were barely on but they are def 10x better than stock headlights (I think my Warrior has the same headlights as the Banshee).
Yes, I'm pretty sure Warrior and Banshee share the same part number for headlights. And I just looked at the ebay listing again; these are spot lights.
run 1 spot one flood?
You have any trouble with these blowing on you? Installed a set and an led tail light and on of these lights blew.
Pedro Gonzalez someone else said the same thing happened. The only thing I can think is that your stator is putting out more power than mine. I've been at wide open throttle a number of times already with no issues.
Michael Sabo ya I had a set of the square auxbeam lights and blew both of them pretty fast after I went on a little ride. So I bought these. Had another regulator laying around so I put it on and tested getting no more than 12 volts on my outputs. Maybe i got a bad light.
It could be; that's one thing that sucks about cheap Chinese parts, sometimes you get duds. I did notice that some of these are different on ebay though. They look very similar but have different cooling fin patterns on the back and some are thicker/heavier. I only noticed because the pair that was on my banshee when I bought it was mis-matched. From the front they look the same but one was thicker and heavier.
did you have to do a dc conversion?
No sir; and no flickering that I can see unless you're bogging.
are you running stock stator or aftermarket?
Stock stator
The link doesn’t work anymore, does anyone know the name of it?
What's going on I just recently got my led light on my banshee everything was good had the lights on then like 3 minutes later they went out ??? Any ideas on what it could be
Juan Rodriguez voltage regulator is prob bad juicing the lights too hard
Same thing on mine happened
Need a reg to run leds
OK so I'm just going to buy a new n c how it goes
Comment back after, I'm curious to see if that's the issue.
So that's where all the tatywadies went I ain't seen them not huggers since I had Spider-Man ones
nice lights and install, you think about just buying a small battery to power them ? i'm no electronic genius here...
so with stock light bulbs you can connect them up in reverse polarity.. because it's ac current, now the led light is "light emitting diode" we can't connect them in reverse polarity it has to be connected in one way because it's a diode and a diode is made up of a anode and cathode that only allows electricity to go through it only in one direction this is why led lights work so well with dc current so putting a dc led on a ac system is choking up the ac waveform... something to think about.
It's a good idea; there's actually a good amount of Banshee guys that do this. If you search Banshee DC conversion, you will see a bunch of results on google.
you could do it without doing the dc conversion with just a battery and a battery tender connected when the banshee is not in use, the bigger the battery the better you could calculate the led power consumption to the battery amps to give you running amp hours, this would leave the stock lighting system with no work load.
Iconoclast Deth sounds like you know your stuff. thats something a may do in the future. a friend of mine does that with his YZ250
How long does the lights last ???
Getting different responses from the comments. It seems like it depends on your setup and what kind of stator and voltage regulator you run. My lights are still running strong after about a year.
Hey buddy I got those some exact light and they burn out the second time 😢 any ideas what could have gotten wrong
Have to run a AC/DC conversion so they don't flicker and burn out
Thanks
I want to put these on my blaster but the colors on the wires are different what do i do?
I'm sure they will work. Find yourself a wire diagram or use a multimeter to match up your wires; I've never wired any lights on a Blaster myself.
Michael Sabo thank you I will try that I’ve seen other people with them on blasters so I think it’ll work also
A link to the guards would be nice
Yes, link to guards?
I did the exact way u did but, when it's on idle it's brighter .. once i accelerate it or ride it the led lights go dimmer?? 😳
Chevy Man whaaaat? That Doesnt make any sense; it should be the opposite; the higher the RPMs, the more output the stator is giving off. Did your factory headlights do the same?
Michael Sabo When idling they are brighter, once I accelerate they dim.. any idea what I did wrong? Or a tip I can do
The only thing I can think is that it's something with the regulator? Like I said before, the more RPMs, your stator should be putting out more power, making your lights brighter. When is the last time you inspected/replaced your stator?
Michael Sabo stator never been replaced but never had problems with the regular white bulbs work perfectly find... I guess I'll try another set of led lights? 🤔
I done went thur 4 of these lights for some reason all my lights keep blowing
What kind of stator are you running? A few other guys said the same thing. Mine have had no issues so far.
Check voltage regulator at back of bike it's the blue wire that connects I had it unplugged and brew all my lights
You should always use DC with LED. A LED is a diode, it will work with AC but you will shorten the life of your lights.
Thank you for the comment and information. I am still learning things myself. I may do a DC conversion in the future. So far my lights are still holding up great with AC.
Michael Sabo The easy way is.to buy an ac/dc converter.
The other option is to do the float ground mod. Maybe you can do a video about it.
This is a good idea. I will do more research and make sure I know what I'm talking about first.
Can i have a link to these headlights
I just put links in the description for all the parts I ordered for this! Check it out!
Thanks man, loving the build series
Thanks for the comments; it looks like a CR85 is next!
How did you learn all this
I learned pretty much everything from my Pop; I grew up fixing everything around the house with him and working on our cars and lawnmowers and stuff. The rest I learned from manuals and the internet.
Installed these same lights and now I keep blowing my tail light bulb. It acts like the voltage regulator because it gets brighter with rpm until in blows but it worked great until the headlight swap.
Did you float your ground and install a regulator for DC?
I did it the same way he did
No links work.
Link doesn’t work
Fuck they aren’t on eBay anymore I can’t find any with the guards
I’m running the same LED’s on the warrior hi beam, smaller bar for low beam. Made a diode switch so all three work with hi beam, no issues in three years, Lots of squinters when I meet them on the trails lol, In process of doing a set of Halos for them now👍
Nice clean beastie
th-cam.com/video/cSGfdDULfjE/w-d-xo.html
Looks like we got a bleeder
mine blew as soon as i dumped it now they don't work
Really? That sucks man. They actually blew out?
Michael Sabo they lasted only 10 mins
kno dadon wow Man I'm sorry to hear that. I wonder if you got a bad set or something. you're sure your stator is working, and all of your connections are good? a lot of guys run these
Michael Sabo everything works fine the lights just don't work now
kno dadon I'd contact the seller and see if they'll send a second set free of charge.
If you wire in a big boy capacitor on the hot side the flicker will go away!
im about to do this, which capacitor would you recommend? have a link? also what connectors did he use? the link expired
@@ProteinPounder I think he wired his factory connectors in and if you use around any 30v capacitor it will store enough energy to hold the small amount that discharges for the light
Really a brief as a shop rag wtf 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
What kind of dirty underwear do you prefer LOL only breaking balls
Fruit of the loom 😂😂😂
You confuse me sorry can you take pic of the connection thank you