bcoz the transfer were not connected to main gearbox, this system use split transfer case same as older Suzuki jimny or samurai..But the bushing holding the transfer were little weak.
@@ycs1466 no shit Sherlock. There's still no reason for the transfer case to be shaking THAT bad. There's more than just "weak" bushings going on here.
At 2:59 the transfer case is about to exit the vehicle. While the idea is awsome a few of the set ups have left some crucial parts in very vulnerable places. I would never want my caliper lower than the axle. And with all the aftermarket stuff the shock mounts should be moved up. And unless their running Mirfields those Birfield axles will need attention before long.
Supporting mods are always left unspoken in a lot of "jdm" vehicle modification ads or whatever you wanna call this... These are incredibly light trucks tho they make a Hilux look like a dam full size...
Thanks for all the comments! I explained it several times, but I couldn't take measures for the transfer case on the day of shooting. First of all, I gave priority to shooting. Now all the measures have been completed. Expect the next version!
How about an EV Conversion removing the engine and putting the Mitsubishi PHEV rear motor sideways in place of the transmission/transfer box thus powering the front/rear axels, and 2 Mitsubishi PHEV battery packs...
Nice, but the transfer case vibrate under stress like it isn't hold on on nothing. Should think to wrap it round in some anti vibration, anti wrap support.
Did anyone else see the terrible vibration on the vehicle driveline at 0:23-0:27? That will be a weak point no doubt. And again at 2:55-3:00? What was it, the transfer-case? That need to be secured. Otherwise one may have a mechanical failure way out in the boonies. And what a pain that is. You can also see the rear driveshaft doing the shimmy at 4:25-4:35. That is not a vibration that would be acceptable to me off-road.
Nice build and video. Did anyone else notice the extreme amount left right vibrational movement on the transfer case and drive shafts during the underbelly shot. I'm hoping he just had some mounts break loose, because if not.... WOW! I can't believe it will last long like that
in the description "Thanks for all the comments! I couldn't take measures for the transfer case on the shooting day, but I gave priority to running as hard as I could. Now all the measures have been completed. Expect the next version!"
Might want to do something about a transfer case mount and cross member . Looks like its going to fall out on the ground the way it is flopping around under there
Thanks for all the comments! I couldn't take measures for the transfer case on the shooting day, but I gave priority to running as hard as I could. Now all the measures have been completed. Expect the next version!
Trying to think why they left it like this - do you feel the play would absorb torque therefore increase the life of the Tcase? - at the cost of putting more strain on the more affordable, robust component @unijoints? or am I completely wrong - never owned an AWD or looked into them much
Japanese light trucks have a mid-engine engine in the center of the car, like a sports car, so they are more stable than you might think, but even Japanese people don't like the cramped interior!😢❤
Now you guys need to make a transfer case that isn't flopping all over like a fish out of water. And your steering knuckles won't last 2 hours of off roading with that much strain put in those tiny un captured knuckles and baby ball joints. The portal axle itself it very cool though.
This vehicle have a cabin,a top and a heat,no rain on a head and a snow to,a rear box,a good suspension and long to.I like this mini truck,good video,i live in Quebec Canada i dont have in my country because i buy one.
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
The center diff is wobbling all over the damn place man!
I thought you were being picky but damn. It looks like those videos of washing machines with bricks in them
At 2:58 😱😱😱!!!
Transfer case just about shakes itself to bits .
i was just about to say the same thing lol god damn!! lol
I was really hoping I wasn't the only one that saw that...
bcoz the transfer were not connected to main gearbox, this system use split transfer case same as older Suzuki jimny or samurai..But the bushing holding the transfer were little weak.
@@ycs1466 no shit Sherlock. There's still no reason for the transfer case to be shaking THAT bad. There's more than just "weak" bushings going on here.
@@jonjacob1962 search about jimny transfer case vibration, common problem of this type of transfer case.
The way the transfer case shakes is terrifying!
I thought that was a muffler shaking but it was the transfer case
At 2:59 the transfer case is about to exit the vehicle.
While the idea is awsome a few of the set ups have left some crucial parts in very vulnerable places. I would never want my caliper lower than the axle. And with all the aftermarket stuff the shock mounts should be moved up. And unless their running Mirfields those Birfield axles will need attention before long.
why on earth would they keep that shot?
Supporting mods are always left unspoken in a lot of "jdm" vehicle modification ads or whatever you wanna call this... These are incredibly light trucks tho they make a Hilux look like a dam full size...
2:58 .025 speed .. Check out that transfer case shimmy... Put some shock absorbers on that divorced unit to soak up some of the oscillation.
Built different.
Thanks for all the comments!
I explained it several times, but I couldn't take measures for the transfer case on the day of shooting.
First of all, I gave priority to shooting.
Now all the measures have been completed.
Expect the next version!
How about an EV Conversion removing the engine and putting the Mitsubishi PHEV rear motor sideways in place of the transmission/transfer box thus powering the front/rear axels, and 2 Mitsubishi PHEV battery packs...
price?
Nice, but the transfer case vibrate under stress like it isn't hold on on nothing. Should think to wrap it round in some anti vibration, anti wrap support.
I don't care what anybody says negative about those trucks, i think they are amazing, it's incredible the mods that can be done to them. 👍👍👍🍻
That transfer case sure shakes and shimmy’s, portals are the best
I agree. I need improvement.
Love it tho!
2:58 next product, a bracket to reinforce the mount for the transfer case.
i know right i had to look at that like 5 times
まるで小さいウニモグ、ミニモグだね、かっこいい!
まんまそれな
might wanna add a few more bungie cords to that transfer case mount
You need to reinforce the transfer case mounting. 👍🏼
That transfer case shake tho Jesus man
this is what i was thinking wowza how long will it last
looks like they divorced the transfer case, and its chain driven from the trans.
Am I the only who caught the transfer case shaking like crazy ?? At the beginning of the video. 🤔
that transfer case sure does need a stabilizer or two... 2:55
That transfer case was jumping 4 inch's left to right trying to come out, needs better mounts
Did anyone else see the terrible vibration on the vehicle driveline at 0:23-0:27? That will be a weak point no doubt. And again at 2:55-3:00? What was it, the transfer-case? That need to be secured. Otherwise one may have a mechanical failure way out in the boonies. And what a pain that is.
You can also see the rear driveshaft doing the shimmy at 4:25-4:35. That is not a vibration that would be acceptable to me off-road.
that is the new vibration option! :-) nothing a few zip ties and duct tape could not hold
Ya that thing was dancin for sure
Check out that transfer case movement. Holy crap. How does it not snap drive lines ?
Lol. Shiat is gettin wild.
Love the sound from those mini crawlers
Your Transfer case is shaking like its about to explode.
Nice build and video. Did anyone else notice the extreme amount left right vibrational movement on the transfer case and drive shafts during the underbelly shot. I'm hoping he just had some mounts break loose, because if not.... WOW! I can't believe it will last long like that
"Pro Staff" yet they secure a transfer case with bungee cords
That transfer case don't look like it's going to last. LOL! I would like one of these tho.
Holy crap did you see the transfer case at 0:25?!? I suspect imminent explosion!
in the description
"Thanks for all the comments!
I couldn't take measures for the transfer case on the shooting day, but I gave priority to running as hard as I could.
Now all the measures have been completed.
Expect the next version!"
Might want to do something about a transfer case mount and cross member . Looks like its going to fall out on the ground the way it is flopping around under there
Ok I want one of these but I also want it to be a sleeper in the back
すごい、、こんな世界があるとは。。 本当に驚きました。
2:58 Things are getting shaky for that transfer case 😂😂
It’s crazy these things way less then civics
That transfer box looked like it was coming off. Still very cool though
I'd say it looks like it was coming off see that thing shake. Maybe the drive axle was bent Bent That's not gonna last long shaken like that.
ジムニーも良いですが、そこを敢えて軽トラってロマンもあるでしょ（オフのバイク積めますし）
Сузуки - карри.... Катаюсь на таком уже 6 лет!!! Доволен сверх меры, потому как. Грузовичок очень достойный, я просто влюблен в него!😀😀😀
Dis u guys see that transfer case doing the wiggle dance at the beginning? That under shot...?? Lol. Wow. May wanna brace that thing. Cool truck tho!
Umm....in the intro was the transfer case shuttering like crazy?!?!?!
That jumped out at me too. Definitely going to have issues with that! Needs a cross member, or skid plate mount.
This setup on a 6x6 crawler would be my dream
I love these trucks and videos I just wish I could get these guys to answer my questions
Did anyone else notice the transfer case was flopping around
Woah!! @0:26 ya.
Yes sir.. not really a good marketing strategy to be showing us this...
@@kimzengly typical Chinese marketing
2:57 you need to made a transfer case craddle mount able to eliminate that shaking
OMG did anyone else notice the t case trying to launch into outer space in the intro in the shot from the bottom?
Xfer case: "Let me outta here..."
Check the transfer case mounting. Its jumping a lot
Looks as if that transferase is about to JUMP out of the truck!!! Why does it jump around like it isn't attached to anything???
キャブオーバー車での急斜面下りは怖そうだけどここまでやるとカッコイイ。タイヤの上にいるからジムニーと比較したら揺れは半端ないんだろうねー。
That FREE FLOATING transfer case must be a real custom job 😒
Australia wants this truck and combo hell yeah!!!!
really cool, next upgrade, T case bracket
very nice T-Case vibration....
Thanks for all the comments!
I couldn't take measures for the transfer case on the shooting day, but I gave priority to running as hard as I could.
Now all the measures have been completed.
Expect the next version!
Where can I buy this awesome suspension kit. Price anyone, or where to contact the manufacturer.
Please contact us at this address.
Or check on Facebook.
www.4x4prostaff.com/cathand/otoiawase.php?serial=08284
facebook.com/prostaff.zeal/
no expert here... that transfer case has a lot of play check the brackets on it they are kaput
good lord at the end it looked like it was about to sling the t-case
Transfer case about to explode
Looked like it needed bolted down, damn that was shaky
Look at that transfer case shaking at the three minute mark. That’s kind of spooky.
Legit re watched it a few times. Bushings made of bubble gum
脚は良いですね。
ただ、トランスファーのブレ気になりますね…
シャフトの角度的にやむを得ない部分ですかね…
勝手に頭で想像しながら見せてもらいました笑
Man Fix that janky bent rear driveshaft before the transfer case blows out.
Those portal axles are really quite neat and hopefully not too heavy!
They certainly improve the minimal clearence of the Kei trucks!
Holy driveline vibration!
That transmission is going to fall out
Most realistic RC crawler 😊🤘
It's not an rc.
I am so glad I found this channel. I was thinking about buying one of these mini truck and doing this very samething
but now you woke up & bought an 80 series,or gu trayback.. this is garbage..
Transfer case is trying to escape.... I don't think it likes it in there 🙂
Cool looking but that transfer case is a future grenade, near future.
Vw had this on there kombi 60 years ago
Floating Transfer case ? It looks shaking so much !
Would rather have something like this than a side by side
Word 😎💯👊🏾
I would love to own one of those trucks. They would make a badass side by side
0:50 That coil is about to go "PING" 😲
I can’t log onto your website in Canada, I’d love to order so many of your products
What's with the transfer case at 2:58 !!!???
É bom demais ver essa tipo de carrinho se sair tão bem nesses tipos de terrenos, algo inusitado! Faltou terrenos lamacentos. 🇧🇷
wow , Tcase is going to break , vibration must be terrible .
Glad I wasn't the only one that saw that
Trying to think why they left it like this - do you feel the play would absorb torque therefore increase the life of the Tcase? - at the cost of putting more strain on the more affordable, robust component @unijoints? or am I completely wrong - never owned an AWD or looked into them much
the transfer case was actually stable it was the rest of the world shaking around
2:57 ... Are transfer cases supposed to wobble back and forth 3 inches every time the driveshaft goes round?
この車体でスノーアタックが見たいな、
かなり楽しそうだ。
Japanese light trucks have a mid-engine engine in the center of the car, like a sports car, so they are more stable than you might think, but even Japanese people don't like the cramped interior!😢❤
That is Japan's K-truck.
Save for the sambar, who's engine sits directly over the rear axle
Couple of Toyota 8" axles and proper driveline angles, and that would be a very fun durable truck.
Now you guys need to make a transfer case that isn't flopping all over like a fish out of water. And your steering knuckles won't last 2 hours of off roading with that much strain put in those tiny un captured knuckles and baby ball joints. The portal axle itself it very cool though.
That did look, um, flimsy.
Cool fun and light truck for offroading.
My dream build for my keitruck
RIP: transmission, TC and 3rd member
So cool I can't wait to order your kits!!!!!
Holy fucking shit hahahahahahhaha that transfercase is about to have a yard sale😂😂😂😂 please don't wheel that thing alone lol
Are the transfer case mounts made of rubber bands!? Because that thing is bouncing around like it does!
Молодцы, Красиво снято.
Авто просто отличные, их бы на Сахалин и тут на них покататься...
Awww it's like a roller skate with a roll cage.
Why does the transfer case vibrate so much?
Bad engineering ha ha! Maybe break some silent blocks!
What's with the shaking gearbox?
That transfer case looks like it's about to exit the vehicle
The transfer case looks like its shitting razor blades
Awesome little off road truck ..
キャタピラー仕様の軽トラ､長野･新潟の豪雪地帯ならでは普通にクロネコとか旅館ペンションが持っているよ｡
What's up wiuth the transfer case wiggle
Transfer case shakes like hell. What's up with that mess.
They forgot to tighten the bolts
What's up with the transfer case moving around like that?
That transfer case tho!!
She was shaking like a leaf!
The measures were not in time for the take a video.
Currently, all measures have been completed.
Why does the transfer case shake so bad?
Better do better on supporting transfer case LOL
But really cool design nice job
Good idea but it looks like the entire under train might fall on ground negating the increased ground clearance
I'm more scared of the coil springs shooting off and hitting someone's mouth 😅
This vehicle have a cabin,a top and a heat,no rain on a head and a snow to,a rear box,a good suspension and long to.I like this mini truck,good video,i live in Quebec Canada i dont have in my country because i buy one.
Really loving this for Jamaica, this would be nice to navigate the distric roads & lanes 💯😎👊🏽❗