Hi Sunny, in TH-cam i find only people who explain it difficult. But then i found you. And you explain it like, so good, that i can understand it well and learn it. It is that you explain it with simple words
Though, the video is just 9 minutes however when I was drafting notes on it I used 9 pages. So much details in a very crisp video.. I am preparing for layer 2/3 interview let's c
Hi, Sunny! I misunderstand one thing about conf. revision number(CRN) in this video: U said every new configuration increments a CRN by one, so the higher number - newer(recenter) data. But at 6:47 U said client will update its data, when it receives a lower CRN... isn't it vice versa? Or I didn't get the idea totally...
The it he is referencing is the CRN of the VTP Client. "If ITS OWN revision number is higher or equal, the packet is ignored." [emphasis added] Read: If the VTP Client device has a CRN of 50 and it receives a Summary Advertisement of 50 or lower it will ignore the Summary Advertisement. "If IT (still referring to the VTP Client and should be read as ITS OWN) is lower, the client will update its database." [emphasis added] Read: If the VTP Client device has a CRN of 50 and it received a Summary Advertisement of 51 or higher it will use the Summary Advertisement information to update itself. Hopefully this explanation helps. English can be difficult with "it" as it is a pronoun, singular pronoun, and noun and keeping track of what "it" is "it" at any time can be tricky to follow.
I just wondering, if vtp server configuration has more revision, but actually revision was to delete some vlan, and then its connected to a network and then that switch will broadcast its vlan config and apply that config since it has higher revision, then it'll 0-ed the whole vlan network configuration. Instead of counting the revision, why they don't calculate the number of vlan record to be broadcast over the network
Great question and insight. To answer your question about "why they don't calculate the number...", I think the number of vlan is not certain as a new switch might join the network any time.
Sir, but I can see my client switch sync with server but when I assign port to a particular port in a vlan in server my client only sync the name of vlan but not the port assigned to it I have to go-to client and assign port on it ?? Why
Very informative !!! best explanation I have seen for VTP!!!, Prof.Sunny please I hope you create a full fundamental Course in Networking in Udemy it w'd really a greet resource to use my regards.
Thanks...also request you to upload video on switch capacity, forwarding rate in mpps, backplane speed, stack bandwidth, aggregate bandwidth, use of switch ASIC chip and buffer and use of Switch RAM...
Thanks for ur reply...these points are required for performance of switch and mentioned in govt. Procurement tenders.....for system engineers or presales engineer...
Man, IDK what it is about your voice or your explanation, but things just click when I watch your videos Sunny. Thank you!
Hi Sunny, in TH-cam i find only people who explain it difficult. But then i found you. And you explain it like, so good, that i can understand it well and learn it. It is that you explain it with simple words
Thanks a lot for your nice comment. I will do my best.
To the point explanation, covering all the concepts.
your videos are very easy to understand and very simple. very useful. keep it up.
The more details... the better... 💯💯💯💯
Thank you, Mr. Tech Guy!
@@sunnyclassroom24 You are always welcome and thank you for your tutorials!
💯💯💯💯
@@SkyFly19853 Thank you very much for your kind words. They mean a lot to me.
@@sunnyclassroom24 You are welcome very much. I know they do...
Super super helpful ❤
Thanks for the video, Sunny!
Awesome. Thanks, Sunny.
You are welcome!
You are my master. Thank you so much!!
You are welcome! Thanks a lot.
Excellent explanations indeed
Thank you!
keep working your hardest sunny!!!!
Thanks this video is really helpful.
thank you prof, u are a great help , u have no idea..
Excellent explanation. Good video!
great topic, awesome animation, thank you sir!
You are welcome!
thank you sir for this explanation! Truly helpful
Thank you
good clean explenation
Thank you Sunny!!
it s good to refreshing memory, to learn from zero, not good and not anough detailled. just a good recapitulation, thnx for that.
Thank you very much, do please have video on load balancing and higher availability
Though, the video is just 9 minutes however when I was drafting notes on it I used 9 pages. So much details in a very crisp video.. I am preparing for layer 2/3 interview let's c
ciao sunny, sempre numero 1 o come dici tu "always on top"
Well explained i appreciate ; but i have a question is it recommended to work with vtp protocol or it produces more vulnerabilities?
FANTASTIC !!! THANK YOU !!
You are welcome! Thank you for your support!
Why we can not use vtp for VLAN trunking
Hi, Sunny! I misunderstand one thing about conf. revision number(CRN) in this video:
U said every new configuration increments a CRN by one, so the higher number - newer(recenter) data.
But at 6:47 U said client will update its data, when it receives a lower CRN... isn't it vice versa? Or I didn't get the idea totally...
Did ever receive an answer to this discrepancy?
The it he is referencing is the CRN of the VTP Client.
"If ITS OWN revision number is higher or equal, the packet is ignored." [emphasis added]
Read: If the VTP Client device has a CRN of 50 and it receives a Summary Advertisement of 50 or lower it will ignore the Summary Advertisement.
"If IT (still referring to the VTP Client and should be read as ITS OWN) is lower, the client will update its database." [emphasis added]
Read: If the VTP Client device has a CRN of 50 and it received a Summary Advertisement of 51 or higher it will use the Summary Advertisement information to update itself.
Hopefully this explanation helps. English can be difficult with "it" as it is a pronoun, singular pronoun, and noun and keeping track of what "it" is "it" at any time can be tricky to follow.
I just wondering, if vtp server configuration has more revision, but actually revision was to delete some vlan, and then its connected to a network and then that switch will broadcast its vlan config and apply that config since it has higher revision, then it'll 0-ed the whole vlan network configuration. Instead of counting the revision, why they don't calculate the number of vlan record to be broadcast over the network
Great question and insight. To answer your question about "why they don't calculate the number...", I think the number of vlan is not certain as a new switch might join the network any time.
@@sunnyclassroom24 Thanks for the answer, I'll waiting for your new video, keep the it up !
@@luqmansen I will.
Sir, but I can see my client switch sync with server but when I assign port to a particular port in a vlan in server my client only sync the name of vlan but not the port assigned to it I have to go-to client and assign port on it ?? Why
Hi sir can you discuss ospf concept . Thank you
Which is the difference between Dynamic desirable and Dynamic Auto???
VTP Dynamic seeks/initiates to establish a trunk; whereas VTP Auto waits to be invited to become/join a trunk. Hope that helps.
hello sunny. Do you have topic about RIPv1 &RIPv2
Thank you very much, very informative and systematic lesson.
Very informative !!! best explanation I have seen for VTP!!!, Prof.Sunny please I hope you create a full fundamental Course in Networking in Udemy it w'd really a greet resource to use my regards.
Thank you very much for your comment and suggestion. It might be an option someday if you think I would be serving more people.
Always so informative. Thanks for these videos.
WasiikN
Thanks for your helpful videos .
How can i get written note from you .
Great teaching method.
Thank you
thank u so much that was really helpful
Any playlist created for Routing Protocols ?? please do create videos on routing protocols !
Not yet. I will.
Thank you, Sunny
Thanks...also request you to upload video on switch capacity, forwarding rate in mpps, backplane speed, stack bandwidth, aggregate bandwidth, use of switch ASIC chip and buffer and use of Switch RAM...
I will upload more about switches in the future. Thank you very much for your patience.
Thanks for ur reply...these points are required for performance of switch and mentioned in govt. Procurement tenders.....for system engineers or presales engineer...
@@IT-Presales Thanks a lot for your trust. I put them in my to-do-list.
best teacher thanks sunny!! :D
My pleasure!
Intensive and informative information keep it up
Nice drawings
Thank you so much 😀
excellent explanations as always as far as i am concerned.....can you make a video on DTP(dynamic trunking protocol)?
greate explanation
thank you
Great video!!
Thank you very much, Dane pane.