ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ต่อไป
เล่นอัตโนมัติ
PART 6 HOW TO INSTALL BUILDING WRAP PROPERLY ON YOUR GARDEN ROOMCreate Garden Rooms Ltd
มุมมอง 5K
How i Built my Dream Workshop Garden Room - Cladding, Rubber Roof and MoreThe DIY Guy
มุมมอง 124K
PART 15 HOW TO BUILD A STEP FOR YOU GARDEN ROOM MILLBOARD AND CEDAR CLADDINGCreate Garden Rooms Ltd
มุมมอง 4.4K
เปิดคำต่อคำ ช่อ-หมอวรงค์ ปมยุบพรรคประชาชน l STORY LIVE EP.43 (HIGHLIGHT)Spring News
มุมมอง 490K
คราวหลังอย่าให้พ้ออีกประธานฮ่าง Channel
มุมมอง 114K
PART 11 FULL RUBBER ROOF EPDM INSTALLATION GUIDE INCLUDING SOFFITS, FACIA BOARDS AND GUTTERCreate Garden Rooms Ltd
มุมมอง 9K
PART 3 HOW TO MAKE AND INSTALL A GARDEN ROOM DOOR LINTELCreate Garden Rooms Ltd
มุมมอง 6K
PART 4 HOW TO INSTALL A FLAT ROOF ONTO YOUR GARDEN ROOM COMPETE ROOF DECKCreate Garden Rooms Ltd
มุมมอง 6K
Garden Room Workshop: Part 20. Soffits & BattensAli Dymock
มุมมอง 107K
Plasterboard HACK | Every DIY'er Should KnowOn The Trowel
มุมมอง 544K
EPDM Rubber roof system and how to install them the proper wayWork life
มุมมอง 46K
How to put a roof on a garden roomThe Garden Room Guru
มุมมอง 43K
PART 13 HOW TO FIT UNDERFLOOR HEATING, LAMINATE FLOOR AND SKIRTING BOARD TO YOUR GARDEN ROOMCreate Garden Rooms Ltd
มุมมอง 13K
นายกฯ ต่อจาก "เศรษฐา" ใครมีโอกาสได้ตำแหน่งมากที่สุด? | Thai PBS NewsThaiPBSNews
มุมมอง 339K
เปิดคำต่อคำ ช่อ-หมอวรงค์ ปมยุบพรรคประชาชน l STORY LIVE EP.43 (HIGHLIGHT)Spring News
มุมมอง 490K
นี่คือ Texture Pack ที่โคตรจะสมจริงที่สุด!!! #เกมกับshorts #minecraftMrWattana
มุมมอง 311K
Harley Quinn's desire to win!!!#Harley Quinn #jokerHarley Quinn with the Joker
มุมมอง 6M
บุกบ้านเซเลปชื่อดัง ปิดซอยเลี้ยงทำบุญบ้าน | BeamOil Family | EP. 238Beam-Oil Channel
มุมมอง 196K
Running With Bigger And Bigger FeastablesMrBeast
มุมมอง 70M
I'm just about to start building my garden room, got the timber just prepping the ground at the moment (as the weather allows). I accidentally forgot to buy the OSB for the roof when I placed my timber order, and I'm glad I did now. I had originally planned to just use square edge OSB but after seeing this video I'll be getting the tongue and groove for sure.
Thanks for the video.
As always amazing content.
I’m using your video episode to build my garden room/studio for Yoga.
Size of the building is 6 m x 5 m external, I plan to use 2 x 8 joists for Roof, 2 x 4 for the uprights.
Our plan to have 3.6 m bifold doors at the front, What size lintel would you use for the front above the bifold doors?
I was thinking, doubling up on 4.6 metre 2×9” C24 allowing 500mm either side to sit on the wall. Using 2x5 for the front wall uprights - what are your thoughts or guidance?
I thank you in advance for your amazing content and the guy that you’ve given so far.
Many thanks
Karl
Loving you work and videos, may I ask what thickness EPDM you use from Avenir roofing - the 1.14mm or the 1.52mm ? - TIA - keep up the good work.
Think the 1.14 not totally sure to be honest, it’s all pretty tough 👍
Very helpful videos, thanks. Couple of questions - at 2.35 when you join the first two boards do you not need to apply glue? Is that just needed along the 8 feet lengths? And can you confirm whether it's the tongue or groove that's facing the camera - I think it's the tongue but I can't work it out from the video and when you reference it I'm not clear which board you're referring to as it's just out of shot. Thanks so much!
We glued it out of the video 👍 All the joints are to be glued. And it tongue facing the inside and groove on the outside. Writing side up makes it much easier. Writing side down they are a bit of a pig to fit sometimes.
Great vid, where do you get you're timber from, I am from wycombe.
Jewsons mate 👍
Another great video, quick question, is there any reason that you use the smaller T&G OSB on the roof, rather than using large OSB sheets?
Less wastage on the smaller sheets and lugging up 18mm sheets is hard work, smaller ones are much easier to work with that’s why most people use them I think 👍
@@creategardenrooms No t & g on the big sheets is there?
Is the roof rubber supposed to be glued???