Tumbler power test with the Atomstack R1 chuck

Running a power test using the Atomstack A30 and the new R1 chuck rotary.
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
www.etsy.com/shop/TheClackShack
For Clack Shack shirts, check out my store:
the-clack-shack.creator-sprin...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
Atomstack website- www.atomstack.com/
Atomstack on Facebook- / atomstack.official
Atomstack on Instagraam- / atomstack.official
Here are some coupons for use to purchase. Coupons do expire and dates will be below the links.
$150 off Atomstack A30 pro-
www.shareasale.com/u.cfm?d=10...
expires 7/31/2023
A30 Pro Coupon Code: A30PRO100
Valid period: 2023.06.13-2023.09.30
AC1 camera kit-
shrsl.com/4081j
$10 off F3 cutting surface- code $10offF3
www.shareasale.com/u.cfm?d=10...
expires 7/31/2023
$30 off R1 Pro roller-
www.shareasale.com/u.cfm?d=10...
Expires 4/10/2023
6 % off all orders-
www.shareasale.com/u.cfm?d=99...
The Clack Shack on Amazon= www.amazon.com/shop/theclacks...

[@johnmay371]

Thank you once again for your help

[@TheClackShack]

Thanks.. your very welcome

[@beavercreekdesign]

Thanks for the vid.

[@TheClackShack]

Thanks for watching…

[@mikek2824]

How do you get the 4 squares for the grid background on light burn? I see you and LA hobby guy have it and it’s very neat!

[@TheClackShack]

There are settings that enable the grid to be turned off. Look in software settings

[@mikek2824]

@@TheClackShack perfect thank you so much!

[@rmg5353]

We have a Xtool d1 pro 20W and use Lightburn but when we go to material test it’s only doing for cut not engrave. How did you do a test for engraving? Thanks so much!

[@TheClackShack]

At the bottom, change the material settings to engrave

[@HeathyrMikulka]

do you have any setting for the atomstack A20 for the coated tumblers that I can run a grid test im fairly new to this but I am having difficulty finding any real settings for this

[@TheClackShack]

Power and speed tests are needed on tumblers. The coatings are very different, always get a test piece

[@MrBdub16]

I also have the x20 pro. Scoured the internet and found a great starting point. I dialed in and found my fastest and best looking results I used speed 740, power 28% and lines per inch LPI 450. It worked great for names. I'd have to lower speed slightly on more intricate designs.

[@SD333.]

Do you have plans this riser box?

[@TheClackShack]

No, just some plywood and 2x4 frame

[@chrisjohnson3823]

Did you build your stand? Do you have the plans

[@TheClackShack]

I just built it as I went. Yes, I made it from some 2x4s and some luan.

[@basook6116]

did you know if ATOMSTACK R1 Laser chunk compatible with XTOOL m1 ??

[@TheClackShack]

I have never got hands on an M1, can’t say

[@basook6116]

@@TheClackShack thanks

[@btigenie]

Would the R1 work with a Sculpfun S30 Pro Max 20W?

[@TheClackShack]

It should work with any machine that uses the standard stepper plug. As long as you are using lightburn, should work the same

[@ultraclassicdude]

do you have any type of plan for your stand i would like to build one for my x7 pro

[@TheClackShack]

Stand?

[@ultraclassicdude]

yes
@@TheClackShack

[@ultraclassicdude]

i just purchased a rotary chuck i liked your set up
@@TheClackShack

[@cica322]

Would that chuck be compatible with the D1?

[@TheClackShack]

Yes, either using an XTool cable or just plugging it into the stepper cable. It comes with an A and B type cable.