New Battery, new under the hood fuse box and new starter all done by Chevy dealer for equinox. Ran normal for a couple of weeks. Daughter turns key all the lights come on, clicking sound coming from fuse box but won't start and won't jump. Battery checked it still has full power. What else could it be?
@jwil2414 There are a few potential issues that could be causing your daughter's Chevy Equinox to not start even though the battery has full power and the starter, fuse box, and battery have been recently replaced: 👉 Bad Ground Connection: Ensure that the ground connections are clean, tight, and free from corrosion. A bad ground can cause similar symptoms. 👉 Ignition Switch: The ignition switch might be faulty, preventing the starter from receiving power even if the key is turned. 👉 Starter Relay or Solenoid: Although the starter is new, the starter relay or solenoid might be malfunctioning. 👉 Security System Issue: If the vehicle’s anti-theft system is activated or malfunctioning, it can prevent the car from starting. 👉 Wiring Issues: There might be a damaged or loose wire somewhere in the starting circuit or related systems. 👉 Engine Control Module (ECM): The ECM or its connections could be at fault. If the ECM isn't functioning properly, it might not be sending the necessary signals to start the engine. 👉 Faulty Sensors: Certain sensors like the crankshaft or camshaft position sensor can cause the engine to not start if they fail. Since the vehicle is experiencing clicking from the fuse box, it suggests that the starter relay is trying to engage but isn't succeeding. I recommend having a mechanic perform a thorough diagnostic check, especially focusing on the ignition switch, starter relay, solenoid, ground connections, and potential wiring issues. I hope you can fix it quick and that there is nothing more serious. Happy to help!
The hazard warning lights only flash when the theft deterrent system is armed and the engine will not start. To restore the system ,turn the ignition key to the lock position then to the on position,now press the lock or unlock door button on the driver's door,then turn on the ignition, the car should start.
My 2011 Prius started beeping, last night, about every minute. No symbol on the dash. I can start and drive fine. Today I took the car to the mechanic to find out was horror-expensive thing was going to need replacing but there was no more beeping. I looked pretty stupid bothering him for nothing. Went home the car started beeping again and NOW I have the immobilizer symbol flashing. I get my second key fob but that doesn't solve the problem. The manual does not tell you HOW to fix it!!! I will go try the door lock trick ... thanks for the video.
@macforme The beeping in your 2011 Prius accompanied by the flashing immobilizer symbol can be frustrating, especially since it's intermittent. The immobilizer system is designed to prevent the car from being started without the correct key. Here are some steps you can take to address the issue: Check the Key Fob Battery: The most common cause of immobilizer issues is a weak or dead key fob battery. Replace the battery in both key fobs and see if the problem persists. Reprogram the Key Fob: Sometimes the key fob may need to be reprogrammed to sync properly with the car's immobilizer system. This can often be done by following specific procedures found in the vehicle's manual or by visiting a dealership. Check for Interference: Other electronic devices or key fobs (such as those from other vehicles) can sometimes cause interference with the immobilizer system. Make sure there are no other devices nearby that could be causing the issue. Inspect the Immobilizer System: There could be an issue with the immobilizer antenna or the wiring. A professional mechanic or dealership can run a diagnostic to check for faults in the system. Reset the System: In some cases, disconnecting the car battery for a few minutes can reset the electronic systems and resolve minor glitches. Be sure to consult your vehicle’s manual for the correct procedure and potential consequences (like losing radio presets or needing to re-enter security codes). Check for Software Updates: Sometimes, a software update from the manufacturer can resolve issues with the immobilizer system. Check with your local Toyota dealership to see if any updates are available for your vehicle. If these steps don’t resolve the issue, it may be necessary to take your Prius to a Toyota dealership or a specialized automotive locksmith for further diagnosis and repair. They have the tools and expertise to deal with immobilizer problems and can provide a more accurate and efficient solution.
@@Dashboardwarninglights Wow.... *thanks so much for such a quick and complete reply.* .... I tend to avoid dealers at all costs 😂🤣 but I will try the suggestions you gave....
ANOTHER SOLUTION follow these simple steps; SOLUTION Put the key in the ignition and turn it to the on position Turn the wheel in both directions, left and right to relieve the pressure Note which direction the wheel is moving more towards and focus on turning it that way severally Focus on turning it in that direction severally as soon as you are ready to now unlock it Use one hand to now turn the key and the other hand to turn the wheel in the direction it moved more easily in. Simultaneously wiggling the wheel left and right should help unlock both locks. You should hear a little click sound, that tells you the steering is now unlocked. We hope these tips are helpful. write us if you have any questions.
Follow these simple steps; SOLUTION Put the key in the ignition and turn it to the on position Turn the wheel in both directions, left and right to relieve the pressure Note which direction the wheel is moving more towards and focus on turning it that way severally Focus on turning it in that direction severally as soon as you are ready to now unlock it Use one hand to now turn the key and the other hand to turn the wheel in the direction it moved more easily in. Simultaneously wiggling the wheel left and right should help unlock both locks. You should hear a little click sound, that tells you the steering is now unlocked. We hope these tips are helpful. write us if you have any questions.
Hi, I own a 2010 bl mazda 3, the car had an accident. After fixing the car it wouldn't start. The lock light is flashing on the display screen. The starter motor does not work and does not ignite. What could be the problem?
@@ahmetyigit2670 The flashing lock light on your 2010 Mazda 3's display screen indicates an issue with the immobilizer system. The immobilizer is a security feature designed to prevent the car from being started without the correct key. Here are a few potential causes and solutions for your problem: ✅ Key Issues: 👉 Damaged Key: If the key was damaged in the accident or during repairs, the car might not recognize it. 👉 Key Battery: If your key fob uses a battery, it might be dead. ✅ Immobilizer System Malfunction: 👉 Reset Needed: Sometimes, the immobilizer system might need to be reset, especially after an accident. 👉 Wiring Issues: The immobilizer system wiring could have been damaged during the accident or repair. ✅ ECU Issues: 👉 Faulty ECU: The Engine Control Unit (ECU) might have been damaged in the accident. 👉 ECU Reset: Disconnect the car battery for about 10-15 minutes to reset the ECU. ✅ Starter Motor Issues: 👉 Starter Motor Damage: The starter motor itself might have been damaged or disconnected during the accident. 👉 Fuses and Relays: Check the fuses and relays related to the starter motor and immobilizer system. Troubleshooting Steps ✅ Check the Key: 👉 Use a spare key if you have one to see if the issue persists. Replace the key battery if applicable. 👉 Inspect the Immobilizer System: Look for any obvious damage to the immobilizer antenna ring around the ignition switch. Ensure all connections related to the immobilizer system are secure. 👉 Reset the ECU: Disconnect the car battery for 10-15 minutes, then reconnect it and try starting the car. 👉 Check Fuses and Relays: Locate the fuse box and check the fuses related to the starter motor and immobilizer system. Replace any blown fuses. Starter Motor and Wiring: Inspect the starter motor for any physical damage. Check all electrical connections to the starter motor to ensure they are secure. If these steps don't resolve the issue, it might be best to consult with a professional mechanic or a Mazda dealership, as they will have the proper diagnostic tools and expertise to identify and fix the problem.
@kevingoldsmith9822 What To Do With Micro Chipped Keys (most modern immobilizers) 1. Try different key. 2. Turn Ignition on and off 5-6 times. 3. Turn Ignition on for 5 minutes, turn off and retry. 4. Disconnect Battery for 5 minutes. 5. Disconnect Battery for 5 minutes while disconnected join positive (+) and negative (-) leads together, this will disperse any small electrical charge stored in electronics. 6. Disconnect Battery for 5 minutes and reconnect with ignition key in switch on position. What to Do with Remote Key Fobs 1. Check batteries in remote. 2. Press button on remote with batteries removed. 3. Disconnect Battery on car for 5 minutes. 4. Hold button down for a few seconds. 5. Hold both buttons down for a few seconds. 6. If in high area of radio interference (ports, supermarket car parks etc.) move car to new location.
@@Dashboardwarninglights I believe it was present solid on her dashboard. The car clicks but won't turn over and we were able to jump it. Had battery tested was fine said it needed charge. Jumped it drove for about 45 min. Next day it wouldn't start. I appreciate your feedback
@kevingoldsmith9822 Many people blame immobilizers, when it is a battery fault, buzzing noises, relays clicking, dash lights flickering, starter motors sounding like a machine gun are all normally battery problems. If in doubt it is best to try jump starting or swap battery for a known good one.
My nissan note 2010 diesel wont start after disconnecting battery for 30 mins And it was already showing NATS SYMBOL when we start after 4 mins and will be there in dash I went to a mechanic and scanned with obd scanner and didnt find any problems Could you please help
@sinojvarghese2738 NATS prevents the car from starting if it doesn't recognize the key or if there is an issue with the immobilizer system. Here are some steps you can take to troubleshoot and resolve the issue: 1. Check the Key 👉Use the Primary Key: Ensure you're using the main key, not a spare or unprogrammed one. 👉Check for Damage: Inspect the key for physical damage or wear. A damaged key might not be recognized. 👉Try Another Key: If you have a spare, try using it to start the car. 2. Reset the Immobilizer 👉Disconnect the Battery Again: 👉Turn Off the Engine: Make sure the vehicle is off. 👉Disconnect the Battery: Remove the negative terminal and leave it disconnected for 15-30 minutes. 👉Reconnect the Battery: Reattach the negative terminal and ensure it's secure. 👉Attempt to Start the Car: Sometimes a full reset can help clear any issues with the immobilizer system. 3. Check for Immobilizer Issues 👉 Observe the NATS Symbol: If the NATS symbol is flashing, it indicates a problem with the immobilizer. Leave the Key in the On Position: 👉Insert the Key: Turn it to the "On" position without starting the engine. 👉Wait for 5-10 Minutes: This can help the system to recognize the key. 👉Try Starting the Car Again: After waiting, turn the key to the start position. 4. Inspect Key Fob and Battery 👉Check the Key Fob: If your car uses a key fob, ensure the battery inside it is not dead. Replace it if necessary. 👉Try Reprogramming: Consult your owner's manual for steps to reprogram the key fob, or seek assistance from a Nissan dealer. 5. Check Fuses and Relays 👉 Locate the Fuse Box: Check the fuses related to the immobilizer, ignition, and ECU. 👉 Inspect for Blown Fuses: Replace any that are blown. 👉 Check Relays: Make sure the relays for the immobilizer system are functioning correctly. 6. Consult the Owner’s Manual 👉 Look for NATS Information: Your manual might have specific instructions for dealing with immobilizer issues. 7. Visit a Nissan Dealer 👉 Professional Diagnosis: A Nissan dealer can perform a more in-depth diagnostic with specialized equipment. 👉 Reprogram Keys: They can reprogram or replace the keys if needed. 8. Consider Immobilizer Bypass 👉 Temporary Bypass: In some cases, a temporary bypass of the immobilizer can be done by a professional, allowing you to start the car and then get it fixed properly. Possible Causes for the Issue 👉 Battery Disconnect: Disconnecting the battery might have caused the immobilizer system to lose its settings or recognition of the key. 👉 Faulty Immobilizer System: There could be an issue with the immobilizer itself, such as a faulty sensor or wiring issue. 👉 ECU Reset Needed: The vehicle’s ECU might need a reset or reprogramming to recognize the key again. If none of these steps work, consulting with a Nissan dealership or an experienced mechanic specializing in Nissan vehicles will be the best course of action. They can provide more specialized diagnostics and solutions. 🙏 Hope it is helpful for you.
@stormied.9952 Follow these simple steps; SOLUTION Put the key in the ignition and turn it to the on position Turn the wheel in both directions, left and right to relieve the pressure Note which direction the wheel is moving more towards and focus on turning it that way severally Focus on turning it in that direction severally as soon as you are ready to now unlock it Use one hand to now turn the key and the other hand to turn the wheel in the direction it moved more easily in. Simultaneously wiggling the wheel left and right should help unlock both locks. You should hear a little click sound, that tells you the steering is now unlocked. We hope these tips are helpful. write us if you have any questions.
Free Ways to Fix & Reset Forward Collision Warning System (FCW) Pre-Collision System Light Flashing
th-cam.com/video/DESICBat91I/w-d-xo.html
New Battery, new under the hood fuse box and new starter all done by Chevy dealer for equinox. Ran normal for a couple of weeks. Daughter turns key all the lights come on, clicking sound coming from fuse box but won't start and won't jump. Battery checked it still has full power. What else could it be?
@jwil2414 There are a few potential issues that could be causing your daughter's Chevy Equinox to not start even though the battery has full power and the starter, fuse box, and battery have been recently replaced:
👉 Bad Ground Connection: Ensure that the ground connections are clean, tight, and free from corrosion. A bad ground can cause similar symptoms.
👉 Ignition Switch: The ignition switch might be faulty, preventing the starter from receiving power even if the key is turned.
👉 Starter Relay or Solenoid: Although the starter is new, the starter relay or solenoid might be malfunctioning.
👉 Security System Issue: If the vehicle’s anti-theft system is activated or malfunctioning, it can prevent the car from starting.
👉 Wiring Issues: There might be a damaged or loose wire somewhere in the starting circuit or related systems.
👉 Engine Control Module (ECM): The ECM or its connections could be at fault. If the ECM isn't functioning properly, it might not be sending the necessary signals to start the engine.
👉 Faulty Sensors: Certain sensors like the crankshaft or camshaft position sensor can cause the engine to not start if they fail.
Since the vehicle is experiencing clicking from the fuse box, it suggests that the starter relay is trying to engage but isn't succeeding. I recommend having a mechanic perform a thorough diagnostic check, especially focusing on the ignition switch, starter relay, solenoid, ground connections, and potential wiring issues.
I hope you can fix it quick and that there is nothing more serious.
Happy to help!
The hazard warning lights only flash when the theft deterrent system is armed and the engine will not start.
To restore the system ,turn the ignition key to the lock position then to the on position,now press the lock or unlock door button on the driver's door,then turn on the ignition, the car should start.
My 2011 Prius started beeping, last night, about every minute. No symbol on the dash. I can start and drive fine. Today I took the car to the mechanic to find out was horror-expensive thing was going to need replacing but there was no more beeping. I looked pretty stupid bothering him for nothing. Went home the car started beeping again and NOW I have the immobilizer symbol flashing. I get my second key fob but that doesn't solve the problem. The manual does not tell you HOW to fix it!!! I will go try the door lock trick ... thanks for the video.
@macforme The beeping in your 2011 Prius accompanied by the flashing immobilizer symbol can be frustrating, especially since it's intermittent. The immobilizer system is designed to prevent the car from being started without the correct key. Here are some steps you can take to address the issue:
Check the Key Fob Battery: The most common cause of immobilizer issues is a weak or dead key fob battery. Replace the battery in both key fobs and see if the problem persists.
Reprogram the Key Fob: Sometimes the key fob may need to be reprogrammed to sync properly with the car's immobilizer system. This can often be done by following specific procedures found in the vehicle's manual or by visiting a dealership.
Check for Interference: Other electronic devices or key fobs (such as those from other vehicles) can sometimes cause interference with the immobilizer system. Make sure there are no other devices nearby that could be causing the issue.
Inspect the Immobilizer System: There could be an issue with the immobilizer antenna or the wiring. A professional mechanic or dealership can run a diagnostic to check for faults in the system.
Reset the System: In some cases, disconnecting the car battery for a few minutes can reset the electronic systems and resolve minor glitches. Be sure to consult your vehicle’s manual for the correct procedure and potential consequences (like losing radio presets or needing to re-enter security codes).
Check for Software Updates: Sometimes, a software update from the manufacturer can resolve issues with the immobilizer system. Check with your local Toyota dealership to see if any updates are available for your vehicle.
If these steps don’t resolve the issue, it may be necessary to take your Prius to a Toyota dealership or a specialized automotive locksmith for further diagnosis and repair. They have the tools and expertise to deal with immobilizer problems and can provide a more accurate and efficient solution.
@@Dashboardwarninglights Wow.... *thanks so much for such a quick and complete reply.* .... I tend to avoid dealers at all costs 😂🤣 but I will try the suggestions you gave....
ANOTHER SOLUTION
follow these simple steps;
SOLUTION
Put the key in the ignition and turn it to the on position
Turn the wheel in both directions, left and right to relieve the pressure
Note which direction the wheel is moving more towards and focus on turning it that way severally
Focus on turning it in that direction severally as soon as you are ready to now unlock it
Use one hand to now turn the key and the other hand to turn the wheel in the direction it moved more easily in. Simultaneously wiggling the wheel left and right should help unlock both locks. You should hear a little click sound, that tells you the steering is now unlocked.
We hope these tips are helpful. write us if you have any questions.
Will try checking
Follow these simple steps;
SOLUTION
Put the key in the ignition and turn it to the on position
Turn the wheel in both directions, left and right to relieve the pressure
Note which direction the wheel is moving more towards and focus on turning it that way severally
Focus on turning it in that direction severally as soon as you are ready to now unlock it
Use one hand to now turn the key and the other hand to turn the wheel in the direction it moved more easily in. Simultaneously wiggling the wheel left and right should help unlock both locks. You should hear a little click sound, that tells you the steering is now unlocked.
We hope these tips are helpful. write us if you have any questions.
Hi, I own a 2010 bl mazda 3, the car had an accident. After fixing the car it wouldn't start. The lock light is flashing on the display screen. The starter motor does not work and does not ignite. What could be the problem?
@@ahmetyigit2670 The flashing lock light on your 2010 Mazda 3's display screen indicates an issue with the immobilizer system. The immobilizer is a security feature designed to prevent the car from being started without the correct key. Here are a few potential causes and solutions for your problem:
✅ Key Issues:
👉 Damaged Key: If the key was damaged in the accident or during repairs, the car might not recognize it.
👉 Key Battery: If your key fob uses a battery, it might be dead.
✅ Immobilizer System Malfunction:
👉 Reset Needed: Sometimes, the immobilizer system might need to be reset, especially after an accident.
👉 Wiring Issues: The immobilizer system wiring could have been damaged during the accident or repair.
✅ ECU Issues:
👉 Faulty ECU: The Engine Control Unit (ECU) might have been damaged in the accident.
👉 ECU Reset: Disconnect the car battery for about 10-15 minutes to reset the ECU.
✅ Starter Motor Issues:
👉 Starter Motor Damage: The starter motor itself might have been damaged or disconnected during the accident.
👉 Fuses and Relays: Check the fuses and relays related to the starter motor and immobilizer system.
Troubleshooting Steps
✅ Check the Key:
👉 Use a spare key if you have one to see if the issue persists.
Replace the key battery if applicable.
👉 Inspect the Immobilizer System:
Look for any obvious damage to the immobilizer antenna ring around the ignition switch.
Ensure all connections related to the immobilizer system are secure.
👉 Reset the ECU:
Disconnect the car battery for 10-15 minutes, then reconnect it and try starting the car.
👉 Check Fuses and Relays:
Locate the fuse box and check the fuses related to the starter motor and immobilizer system. Replace any blown fuses.
Starter Motor and Wiring:
Inspect the starter motor for any physical damage.
Check all electrical connections to the starter motor to ensure they are secure.
If these steps don't resolve the issue, it might be best to consult with a professional mechanic or a Mazda dealership, as they will have the proper diagnostic tools and expertise to identify and fix the problem.
If the mobilizer lock is present can you override it by jump-starting the car?
@kevingoldsmith9822
What To Do With Micro Chipped Keys (most modern immobilizers)
1. Try different key.
2. Turn Ignition on and off 5-6 times.
3. Turn Ignition on for 5 minutes, turn off and retry.
4. Disconnect Battery for 5 minutes.
5. Disconnect Battery for 5 minutes while disconnected join positive (+) and negative (-) leads together, this will disperse any small electrical charge stored in electronics.
6. Disconnect Battery for 5 minutes and reconnect with ignition key in switch on position.
What to Do with Remote Key Fobs
1. Check batteries in remote.
2. Press button on remote with batteries removed.
3. Disconnect Battery on car for 5 minutes.
4. Hold button down for a few seconds.
5. Hold both buttons down for a few seconds.
6. If in high area of radio interference (ports, supermarket car parks etc.) move car to new location.
@@Dashboardwarninglights I believe it was present solid on her dashboard. The car clicks but won't turn over and we were able to jump it. Had battery tested was fine said it needed charge. Jumped it drove for about 45 min. Next day it wouldn't start. I appreciate your feedback
@kevingoldsmith9822
Many people blame immobilizers, when it is a battery fault, buzzing noises, relays clicking, dash lights flickering, starter motors sounding like a machine gun are all normally battery problems. If in doubt it is best to try jump starting or swap battery for a known good one.
Thanks. Just had battery checked again and it's no good
👍
My nissan note 2010 diesel wont start after disconnecting battery for 30 mins
And it was already showing NATS SYMBOL when we start after 4 mins and will be there in dash
I went to a mechanic and scanned with obd scanner and didnt find any problems
Could you please help
@sinojvarghese2738 NATS prevents the car from starting if it doesn't recognize the key or if there is an issue with the immobilizer system. Here are some steps you can take to troubleshoot and resolve the issue:
1. Check the Key
👉Use the Primary Key: Ensure you're using the main key, not a spare or unprogrammed one.
👉Check for Damage: Inspect the key for physical damage or wear. A damaged key might not be recognized.
👉Try Another Key: If you have a spare, try using it to start the car.
2. Reset the Immobilizer
👉Disconnect the Battery Again:
👉Turn Off the Engine: Make sure the vehicle is off.
👉Disconnect the Battery: Remove the negative terminal and leave it disconnected for 15-30 minutes.
👉Reconnect the Battery: Reattach the negative terminal and ensure it's secure.
👉Attempt to Start the Car: Sometimes a full reset can help clear any issues with the immobilizer system.
3. Check for Immobilizer Issues
👉 Observe the NATS Symbol: If the NATS symbol is flashing, it indicates a problem with the immobilizer.
Leave the Key in the On Position:
👉Insert the Key: Turn it to the "On" position without starting the engine.
👉Wait for 5-10 Minutes: This can help the system to recognize the key.
👉Try Starting the Car Again: After waiting, turn the key to the start position.
4. Inspect Key Fob and Battery
👉Check the Key Fob: If your car uses a key fob, ensure the battery inside it is not dead. Replace it if necessary.
👉Try Reprogramming: Consult your owner's manual for steps to reprogram the key fob, or seek assistance from a Nissan dealer.
5. Check Fuses and Relays
👉 Locate the Fuse Box: Check the fuses related to the immobilizer, ignition, and ECU.
👉 Inspect for Blown Fuses: Replace any that are blown.
👉 Check Relays: Make sure the relays for the immobilizer system are functioning correctly.
6. Consult the Owner’s Manual
👉 Look for NATS Information: Your manual might have specific instructions for dealing with immobilizer issues.
7. Visit a Nissan Dealer
👉 Professional Diagnosis: A Nissan dealer can perform a more in-depth diagnostic with specialized equipment.
👉 Reprogram Keys: They can reprogram or replace the keys if needed.
8. Consider Immobilizer Bypass
👉 Temporary Bypass: In some cases, a temporary bypass of the immobilizer can be done by a professional, allowing you to start the car and then get it fixed properly.
Possible Causes for the Issue
👉 Battery Disconnect: Disconnecting the battery might have caused the immobilizer system to lose its settings or recognition of the key.
👉 Faulty Immobilizer System: There could be an issue with the immobilizer itself, such as a faulty sensor or wiring issue.
👉 ECU Reset Needed: The vehicle’s ECU might need a reset or reprogramming to recognize the key again.
If none of these steps work, consulting with a Nissan dealership or an experienced mechanic specializing in Nissan vehicles will be the best course of action. They can provide more specialized diagnostics and solutions.
🙏 Hope it is helpful for you.
😊 Subscribing really helps us make more videos
👉 th-cam.com/users/yodarud
Mine won’t even let me turn it from lock.
@stormied.9952
Follow these simple steps;
SOLUTION
Put the key in the ignition and turn it to the on position
Turn the wheel in both directions, left and right to relieve the pressure
Note which direction the wheel is moving more towards and focus on turning it that way severally
Focus on turning it in that direction severally as soon as you are ready to now unlock it
Use one hand to now turn the key and the other hand to turn the wheel in the direction it moved more easily in. Simultaneously wiggling the wheel left and right should help unlock both locks. You should hear a little click sound, that tells you the steering is now unlocked.
We hope these tips are helpful. write us if you have any questions.