HOW TO REMOVE A 2003 - 2006 CHEVY GMC SILVERADO SIERRA TAHOE SUBURBAN FRONT DOOR PANEL WINDOW SWITCH
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2024
- Good video on how I remove these window switches from the gm truck, and suvs. I show how to do it with out breaking the screw holder on the bottom side. I usually have these in stock. check link to my store below. It will be same process for the drivers, and passengers side. This applies to 2003 - 2006 silverado, sierra, tahoe, suburban, yukon, avalanche, and escalade. If you like the video please share, and if you know of any more tips comment below. Like, comment, and subscribe as always. Thanks for watching!!!
www.youtube.co...
My store::: www.ebay.com/s...
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, and purchase a item, from me, or anyone else I will receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
I hope this video helped. If you need any interior parts, check attached link. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fstr%2Fbentleysautoparts&campid=5338488856&toolid=20008
I appreciate your video. Helped tremendously. I thought I needed a new bezel for my lock and window controls because, I thought the bezel was broke but turns out it was the armrest that was broke inside which actually holds the end of the bezel that's not screwed.
I would've broken that little tab for sure. Thanks for the detailed tutorial!
Short and simple. Thank you
thank you from a "do-it yourselfer". I found it very east to understand the removal process.
Exactly what I was looking for. Thank you.
I wish, the pre owner of my Silverado watched this before he broke the plastc mount 🙈 short and simply 🤘🏽 thank you
There is a repair kit for your broken piece for your armrest
Yea, I broke that front tab off trying to remove the switch bezel without taking the whole interior door cover off. It was a bear trying to find a replacement switch bezel since they are out of production. I learned the hard way. Even his way of replacing the switch bezel is not easy. At least for me it was not.
Really helpful, thank you! Exactly what I was looking for.
Very Helpful. Thanks i'll let you know if i need a new one. i think it just needs a good cleaning as it intermittent in cold weather.
Thanks man! I was about to break mine off haha
Thanks made it easy
Thanks for sharing. I need the left. 2003 Silverado but not on your site right now.
Thank you.
Great info! Unfortunately, someone got to taking out the driver's side switch panel on my 2003 Chevy Avalanche before I got to it. The post on the switch holder wasn't only snapped off but the cap-screw was so over-tightened that it split.
My driver's side window switch doesn't roll the window down any longer. I wondering if it is repairable?
Fantastic video
Do you have an 03-06 Silverado window switch LH? Didn’t see it on your eBay site
So if that unit that holds the switches this is flopping in and out of my door does that mean that little screw fell out and chances are I’ll have to take my door apart to put a new one in?
Took the door apart, white assembly holds switch via two screws. It was snapped off and I could not replace it as I couldn’t find the part….so epoxy it is.
What years have the keyless entry reciever in the passenger controller ? Please send a link !
Before i get started has anyone taken the switch assembly out of the bezel ? tia
Hello, do you know what size the screw is that is on the underside of the window switch? Is it a 7mm? When I bought my truck both the driver and passenger window controls had already been broken and the screws were missing.
Yes it is a 7mm for sure. I use it all the time to remove these.
If you remove the armrest, the switch part comes off as one unit. Just figured it out.
Your video was great, unfortunately I changed the switch out with a brand new one and still nothing works 🙁
Any suggestions as to what you look for next? I checked all the fuses, wires etc
I have heard that certain switches have to be programmed at the dealer. I think it has something to do with power mirrors. I could be wrong, but its possible.
does the 04 yukon have that screw in the front?. mine has got loose from the back on drivers side . Can I buy that white plastic part?
Is this process the same for the drivers door on a 2006 GMC 2500 Sierra 4-door?
Would like to know how to order the driver side window control switch holder
Requiero esa parte que quitaste, el control máster y los conectores, como te puedo contactar
I have chevy Silverado 1500 hd 6.0 and looking for this passenger side switch. Can you send me a link for it please if you have one? Thanks!!
I need passenger side 03 Silverado
First of all , why did you cut all the wire harnesses if they all have clip on ends to the terminals ? How many people are you coaxing into cutting all the wires like you did? And then have to spend hundreds on new wiring harnesses? The harnesses I’ve had to buy in the past were very expensive and more than hard enough to replace! I hope that your viewers reconsider cutting all the wires, like you did! Especially when the wiring harness clips are easy to unclip!
He said don't cut them
Yes I need a harness because someone cut them before I bought my truck. He says he sells them but just destroyed one he could have sold.
Forgot to explain how to remove the one connector that everyone came to video for. Fail
I watched it to see how to get that special clip off also and he just left it in there. Lol
Right! Grrrrrr
For those of you who may be having a hard time pulling the connector with the gray strap off the module, here's how. The connector in question has a gray strap around the black connector body. There is a tiny tab behind the strap on the black connector body that prevents the strap from moving. Hold it down with a small screwdriver or pick and then pivot the strap over the tab and all the way back.
Thank you, I'm having problems with my passenger door, when I slam close something disconnects and remote or driver side don't communicate with right side unless I slam door so it disconnects or connects back so nothing comes loose.
I need that white plastic piece that the window switch bezel snaps into that is bolted to the door panel itself do you have any idea what that part number is or whats it called ?
Its actually part of the handle. It looks like it is bolted on but its not. This link is what you need. Im out of stock at the moment. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F124106736107&campid=5338488856&toolid=20008
@@BENTLEYSAUTOPARTS yes that is exactly what i need along with a new power window switch bezel i did the exact thing you said not to do in the video and broke the screw right out of it if you get any of those two products in stock in the color grey let me know personal email is danbrittain719@yahoo.com
@@BENTLEYSAUTOPARTS sorry its more of the pewter color you have pictured on the listing its a 2006 silverado that i would need it for
@@yotamans0697 no problem, I will keep my eye out. I do get them often.
Hello, I’ve been struggling to find that white plastic piece that the lower part of the bezel snaps into anywhere online. Do you have a part number by chance? Or know of where to pick one up?
Website please to order
Unbelievable!!! You leave out disconnecting the harness from the panel! It’s obviously a different type of connection!
Wish somebody would just do a damn video on the window switch panel only. Every video it’s extra bullshit
Are you talking about taking the switch itself from the housing it clips into?
Camera panned away turning too as he squeezed that pos out !! Lame ..
Send address