Lawn Mower Cuts off and Surging Multiple Common Issues on Briggs and Stratton Engines
ฝัง
- เผยแพร่เมื่อ 15 ก.พ. 2024
- This Riding Lawn Mower with a Briggs and Stratton Engine is surging under load and cutting off. We show what to look for and the proper way to diagnose the problem. These repairs apply to almost any type riding mower. This repair works on riding mowers, zero turns, brands like.... Cub Cadet John Deere MTD AYP Husqvarna Poulan Pro Murray Troy Bilt Craftsman Honda Toro Snapper and many more.
Claw Grabber Tool Link
amzn.to/3uAz6Hs
Walbro Style Carburetor Link
amzn.to/3SJXvlP
Nikki To Walbro Video Link
• Briggs and Stratton Ni...
Oil Extractor Video Link
• Homemade DIY Oil or Ga...
@OutdoorBoys
#briggsandstratton
#lawn
#lawnmower
@RaleysSmallEngines
@StevesSmallEngineSaloon
@TarylFixesAll
Music: Dirt Road Traveler
Musician: Jason Shaw
URL: audionautix.com
License: creativecommons.org/licenses/...
Edited by YouCut:youcutapp.page.link/BestEditor - แนวปฏิบัติและการใช้ชีวิต
Check Out These Links From Our Video
Claw Grabber Tool Link
amzn.to/3uAz6Hs
Nikki To Walbro Video Link
th-cam.com/video/svQiGhlFO-M/w-d-xo.htmlsi=XAqaDdH_OhdB2yZu
Oil Extractor Video Link
th-cam.com/video/XDm-b9dmCCk/w-d-xo.htmlsi=I9rbRUWmRNZcf-bQ
If you replaced the deteriorated cap I must have missed it?
I do my gas tank with a 5/8 hose . Fill the gas tank with water then sifer it out. Just like cleaning a fish tank same concept. Works great
1:43
That's a job well done.
School can be fun if you have a good teacher. Thank you Professor T-bone.
You are very welcome
@@RaleysSmallEngines, gracias amigo es UN excelente video,sigue ASI ..
@@breannaoliver6316mucho gracias!
I replaced my Nikki carb with a KIPA brand on Amazon....its under $20, I cut all last season and had no problems... Just trying to help out for the folks like me who can't afford a $100 carb👍 Great channel!
Put a new fuel tank on my LT2000 a bit ago. Original had separated at the seam and yes the gaskets was in the bottom of the tank in pieces. Also put on a fuel shut off like you have here, filter and new gaskets in the Nikki using the Kohler kit. Runs perfect now. I also remove the Ethenol from the gas for all my lawn equipment and my classic car. It is nasty stuff when left to sit between uses.
Good videos!
I'm leaving a comment, you done real gooood!
Thank you 😊
Thank You for doing this Video. This is exactly what my Mower is doing. Now I can get it going tomorrow!
Love your videos. You're a professional and very entertaining.
Thank you
It's a smooth operator now T-Bone! Keep up the great work brother!
Thank you
The experience of T-Bone shines once more…Thank you for your teachings to us back yard mechanic boys..
GM to you Sir. Just a moment to say thank you for being so very through with your
Videos. I am retired and within the last year I have begun to learn and enhance my
knowledge on Repairing Small engines. You have largely been my instructor in this
Interesting endeavor. Thank you for your time and sharing your knowledge with us all.
😃👌👍👏
Thank you William. We are glad you find our videos helpful.
Outstanding. Every movement was directed toward accomplishing the goal. Great job. Thankyou Sir.
So nice of you. Thanks so much Walter.
When I get a new cap I remove the rubber gasket, it’s not going to last a year or two anyway 😊
Another good one. T Bone, a great Teacher.
Nice job on the fuel delivery fix T-Bone and that dang Nikki carb!!! 🙂👍
Hey Mrs T-Bone 👋
Thank you John. Dang Nikki carbs. LOL
🤣 Yes sir
I really enjoy watching your videos, thank you.
Nice to have you back!👍
T bone I was about to say I’d use a shop vac then you brought your vacuum out 😂
😆
Wish I found you a few days ago Nice work man!!
I m,odified my shop vac fitting to fit in the gas tank and sucked out 95% of the crap, works great.
Great job and awesome video keep them coming my friend
Your simple way of explaining is elegant sir. Thanks so much.
my mower is doing the same thing, so i'm going to try doing this and hope it works.
Wish as a kid I’d work as a helper with a T-bone in my neighborhood just to obtain the knowledge, love the videos (and the know how) thanks Capt
Thank you. Wish I had someone to pass it on to.
@@RaleysSmallEngines You're passing it on to all of us, ya know? Good stuff man!
Greetings again from the UK. To be honest I would be straight on the internet to find out how much a replacement tank was as this was far too much effort!!!! Great video again. Many thanks.
keep up the good work
Will do. Thank you for watching and commenting my friend.
Love your videos T Bone. I've been watching them for quite some time now and have enjoyed every one of them.
Not only are they informative but some good fun too.
Cheers from the land downunder.
Pete
I appreciate that mate.
A good video, when the fuel tank has that much built up crud the carburetor would have some crud in it as well, I would think. An interesting and enjoyable video sir.
Another great video T-bone!!
Glad you enjoyed it
Whoo wee that was a booger bear for sure! Your knowledge and patience is something I wish I had. You are awesome and gained a new subscriber.
Thanks for the video! My great uncle's Poulan lawn tractor that I inherited is doing the same thing and has the dirty gas tank. I've changed the oil, oil filter, and air filter. Now that I've watched your video, I feel very confident in replacing the carb and cleaning out the tank. Plan on working on it tomorrow!!
Awesome my friend, thank you 😊
Great show
Another awesome video T-Bone! 👍🏻
Thank you
Thanks man, you ARE da man!!!
Your awesome. Thanks for the videos
Hello T Bone. After searching off an on for a video just like this i finally found you today! You are a great teacher and i learned a lot. I have basically the same mower, DOM 1/21 an it died in the middle of the job last fall. Briggs gives ya several books with the mower an they dont even cover my e1550e engine. I wish you, or someone like you was nearby but i can't find a repair guy to trust either. Rifht now i am push mowing mine an my 100 yr old nieghbors yard an this yezr my old body can barely do that too! So first i saved this for rewatching to better learn from you an then realized i just needed to sub an watch all your stuff. I also sent you to a buddy who will love this too.
Thank you, I hope our videos help you out my friend.
@@RaleysSmallEngines thank you. I'm thinkin my next stop will be the T Bone college of carburetor replacement ha ha. I dont have the gas tank fuel line problem....yet.
Maybe I missed it, T, but what about replacing that deteriorated fuel cap gasket?
I have adapters for my shop vac to be able to use a narrow tube to reach down inside tanks like that to vacuum out debris.
I thought I was the only one who cuts up old white cotton socks for shop rags! 😂👍
It’s the easiest way to get it cleaned with a shop vacuum cleaner and one inch hose
Great diagnosis and fix.
👍👍👍.Thank you
You are so welcome!
Great Video
Thank you
Another great video Raley. Thanks
Thank you Robin
Good job tibon
I would probably go with 2 zip ties on that tank 🤣🤣🤣
😆 🤣
Another great video. Thx for the info tbone
Our pleasure!
Excellent video my friend Mr. T Bone, very educational and informative, keep them coming especially as mowing season is around the horizon.
Thank you, will do.
@@RaleysSmallEngines Question Mr. T Bone, I have a Snapper Mfg. No: 2690578
LT2042, 42" 20 HP Hydro Drive RMO and need to replace the drive belt, I've searched the web for help and all I have found are saying the most effective way to replace is remove the steering wheel shaft. Looking to you for advice on getting this belt replaced? Any assistance would greatly be appreciated.
Good deal..good job
Another good one.
Thank you 😊
That is so nasty glad you did a video of this issue plus sounds like it has Nikki carb on this briggs and Stratton the dry rot sounds like ethanol gas over the years unless you can ethanol free gas
Great video
Thank you
Wish I lived closer I have a generator that gave me fits new spark plug and new carb filter and fuel lines still don’t run right it’s surges finally I said the heck with and bought a new one.
Thanks!
Thank you! Hope you have a fabulous weekend 🙂
Wow!!! Thank you Robert 😊!!
good
Another good video t bone
Thank you 😊
Never put the fuel shut off ahead of the filter. Duh!
Hey, enjoyed the video. Ran into the same problem with the surging. Swapped with a new carb, same thing. I'll check the tank and fuel line tomorrow. However, I did notice you cleaned out the debris caused by the deteriorating gas cap, yet still used the same old gas cap after the cleaning.🤔 Did you clean out all the loose stuff off of the cap itself before putting it back on?? If so, sorry, I missed it. Sending a few bucks your way to show appreciation for your videos. Thanks.
My mower has the same symptoms. It's NOT the gas cap. I can get it to run again, BUT it quits after maybe 30 mins. Sometimes it lasts longer sometimes not. The fuel cap is NOT tight so there is venting.
Honda Vtwin 1 side runs good other cylinder hard crank and runs rough and surge?
👍🙏
Thank you
Mine say kapowda,kaponda,kerplunk.😂 So I put a Edelbrock 750 double pump on her. Fastest mower on the block. Ok,I lied
Thanks to the crappy ass f'n Ethanol🥴
Got that right my friend.
Yep , it’s just to make us spend money and more money 😢😢😢
Next Amazon order I place I'm going to use your link
And I'll tell u what I ordered
Is there a way for you to be able to confirm it worked
Thank you. That would be awesome. I'm not sure, but let me know and I will look. Please keep in mind, we get 100s of comments and just can't see all of them. Thank you very much my friend
On the link for the Walbro carb why do you call it a Walbro when it lists it as Briggs and Stratton off the amazon site?
T-Bone : I have a 21 Hp B & S on a rider - all of a sudden it is running at a constant high RPM when throttle is at normal "run" position. It is not surging. The rpm is constant at 4000 rpm in run position. I can back throttle off to the lowest position and it will run at around 3500. What's wrong? Thanks!
Hitchy Magoo what I tried looking that part up on Amazon no luck 🤷😱
What part? I will attach a link. I thought I had links in description.
😂
Hello t-bone.What kind of fuel filter do you use?
Thanks for commenting Mr. Jim. We most commonly use a Rotary 10352 fuel filter.
What size of fuel line do you use?
1/4 inch
Do you have email for troubleshooting questions?
I have several of them and refuse to use them
Gave you a thumbs 👍 up, but I believe you're all thumbs. Ha, but hey, that was a good video. Thanks
Lol Thank you my friend.
How do you know what carb to put on , where is the number
Experience. I use the one in the video on all single cylinder Briggs engines. Link is in the description. Thanks for watching and commenting my friend.
wow those carbs aren't cheap
A NIKKI carb and a 15.5 Briggs are a bad combination, ALWAYS.