Been really watching these videos this year. I love the exhaust cover. I noticed you didn’t Mention that the muffler had to be vertical for moisture to escape out of the muffler. NICE SHOP! 😊
Thank you! Good point. I’ve been running it now for a couple weeks. I haven’t noticed any buildup of moisture in exhaust but maybe I need to pour it out? lol it’s been running great and perfect for aiming towards you while in the shop. 👌
Cool little unit, but that 2KW will not heat that shop. They sent me the 8KW one last year, and while it brought the temp up a little in my 30x40 shop, but it took all day.
Our shop is pretty well insulated. After running it for a couple weeks now. It does take a while but does take the chill out of work area and did raise the shop a couple of degrees but this heater is definitely made for a smaller area or cabin of vehicle/equipment. Perfect for having it blow on you while you work on a job tho. 👊😎
Haha I agree! The instruction manual had shown it bent like this. It didn’t kink, and seems to flow just fine. It does kinda sit up on the exhaust just a hair tho, so the heater isn’t exactly sitting flat on ground on mounting tabs as we use it. Even in my large shop, this heater works great to have pointing towards you while working on a job. Recommend routing exhaust outside for a permanent install or if being used in a small area. We have a large area and doors go open and closed often so it haven’t affected us at all. Burns real clean.
Neither the 2kw or 8kw models are in stock. and you not the first TH-camr that Vevor has done this too of this model.. only place I found it "in stock" is Canada which does the US no good.
Oh no! Maybe contact them and see if they have a comparable model in stock or know when they will get more in stock. Great little unit. Everyone that has come to the shop has asked about it. Great for a little shop, garage, equipment, or camper/RV. 😎👌
Yes, you will want to plumb exhaust outside for a permanent install. But tbh, it burns really clean and hasn’t affected us in a large ventilated area (don’t recommend). It last about 9 hours off one gallon of fuel on high level setting 6. I started it up at 6am yesterday and it ran until 3pm off one gallon. 🔥👌
Nice heater for the shop…definitely a must have for the winter 👍🏻
Greta for a small garage or vehicle! 👊😎
Gotta stay warm with this cold weather
Yep! We are approaching snow weather up here. It’s chilly lol
Cool vid bro! Thanks for sharing!💯👊
Thanks!
Thanks bro my garage is so cold,thanks for the review!😊
👊😎
Been really watching these videos this year. I love the exhaust cover. I noticed you didn’t Mention that the muffler had to be vertical for moisture to escape out of the muffler. NICE SHOP! 😊
Thank you! Good point. I’ve been running it now for a couple weeks. I haven’t noticed any buildup of moisture in exhaust but maybe I need to pour it out? lol it’s been running great and perfect for aiming towards you while in the shop. 👌
Cool little unit, but that 2KW will not heat that shop. They sent me the 8KW one last year, and while it brought the temp up a little in my 30x40 shop, but it took all day.
Our shop is pretty well insulated. After running it for a couple weeks now. It does take a while but does take the chill out of work area and did raise the shop a couple of degrees but this heater is definitely made for a smaller area or cabin of vehicle/equipment. Perfect for having it blow on you while you work on a job tho. 👊😎
Nice heater! But whats cooking in the oven? 😊❤
lol top secret! 👊😎
@ 😉
Did you have any problems bending the exhaust tube in that short radius? I can't believe those chinamen don't build one with a side or front exhaust
Haha I agree! The instruction manual had shown it bent like this. It didn’t kink, and seems to flow just fine. It does kinda sit up on the exhaust just a hair tho, so the heater isn’t exactly sitting flat on ground on mounting tabs as we use it. Even in my large shop, this heater works great to have pointing towards you while working on a job. Recommend routing exhaust outside for a permanent install or if being used in a small area. We have a large area and doors go open and closed often so it haven’t affected us at all. Burns real clean.
Neither the 2kw or 8kw models are in stock. and you not the first TH-camr that Vevor has done this too of this model.. only place I found it "in stock" is Canada which does the US no good.
Oh no! Maybe contact them and see if they have a comparable model in stock or know when they will get more in stock. Great little unit. Everyone that has come to the shop has asked about it. Great for a little shop, garage, equipment, or camper/RV. 😎👌
1. Don't you need to vent that exhaust outside?
2. How long does it run per tank?
Yes, you will want to plumb exhaust outside for a permanent install. But tbh, it burns really clean and hasn’t affected us in a large ventilated area (don’t recommend). It last about 9 hours off one gallon of fuel on high level setting 6. I started it up at 6am yesterday and it ran until 3pm off one gallon. 🔥👌