Moka Pot sputtering or not working correctly: how to solve it!
ฝัง
- เผยแพร่เมื่อ 7 มิ.ย. 2020
- If your Moka Pot is sputtering or spitting coffee while brewing it, or it is not even brewing coffee, it just releases steam, in this I give a tip of how to solve this issue, so that you can brew a perfect coffee with your Moka Pot!
- วิทยาศาสตร์และเทคโนโลยี
I think the key of this (that you point out with your great experiment) is that the pressure must be sealed in the lower chamber and not leak past the funnel edge. The fix using just the parts of the Moka Pot is to make sure the gasket seals against the funnel. Most people focus on the gasket sealing the threaded lower part of the pot to the top, but the gasket has a second separate purpose: The funnel must also seal to the gasket so that the steam pressure does not leak around the funnel edge and up the "stack" (the part that the coffee eventually comes out of).
To make sure the funnel seals: 1.Make sure the gasket is still pliable (incidentally, a brand new gasket doesn't always seal as they are a bit stiff from the factory). 2. Make sure the gasket is clean (i.e. No coffee grounds stuck to or embedded in the gasket). 3. Make sure the top edge of the funnel is clean and free from coffee. When you fill the funnel with fresh coffee, make sure to run your finger over the edge and remove any coffee grounds before screwing on the top. Any bits of coffee between the funnel edge and the gasket will stop the funnel from sealing properly. 4. Make sure the pot top and bottom are well tightened. I hope this helps someone out there :)
😄😄 Whoever thought I'd spent so much time watching a coffee tutorial? ❤
@@kaymarieperera4778 it's a serious biznizz o// if more people were like us and cared about how their coffee turned out.... \♥/
This was an excellent post. I couldn't figure out (even w/a new gasket) what was wrong. I'd hear the water, then a lot of steam, then it would sputter out a 1/4 cup maybe. I feel like I'll never have this issue, again..
Yeah. I have a Bialetti from back in the 70s. Original funnel. And new gaskets that have been broken in. As clean as I get it I just can't seem to get a full seal without the teflon tape.
For me a more permanent fix that basically fixes this discrepancy between funnel and bottom pot was sanding down a millimeter of threaded rim. In my case I could clearly see that the rim of bottom part is higher than funnel rim.
The way this guy pronounces funnel deserves a 🥇
Hahaha, yeah, I've checked the correct pronunciation for funnel and it really have nothing to do with the way I did! 🤣🤣 Sorry for this!! English pronunciation is sometimes very tricky for non native speakers!
@@viniciusandrea3251 No need to apologise, Vinicius. English is a terrible language, even for native speakers.
😂
Fue-nell.......!!!
I love it haha, never change!
you wonderful, wonderful man, this absolutely solved my moka pot problem. i was literally jumping for joy when the coffee came up smoothly and it was nice and strong and the coffee itself (with a touch of milk) tastes so good. thank you, thank you, thank you. may the coffee gods bless you with many years of great brews.
Hey! Very nice to hear that from you!! I I perfectly understand your joy, 'cause that happened to me when I managed to fix my Moka Pot!
Now enjoy the delicious coffee correctly brewed with yours!!
Thanks!
There's one problem though. The metal filter around which the silicone gasket sits is getting slightly hollowed after the brewing. Due to the upward pressure. I reversed it today and it got hollowed out once again. At this rate, I think it will develop cracks and completely give out.
@@mesri3 I think it's normal that the filter becomes hollowed. Sure, if it gets too hollowed, maybe there's something wrong, but the filter of my smaller Moka Pot, which I've never needed to use the PTFE tape, is also hollowed. Maybe you should try leave it like that and check if the process of hollowing gets stabilized. If yes, then just enjoy your coffee, this is not a big deal.
@@viniciusandrea3251 ok, cool but today, I decreased the amount of coffee powder and the hollowing didn't happen. the coffee decoction also came into the upper chamber more smoothly and more of the water from the lower chamber got used. so I guess I was putting too much coffee powder. thanks for being so kind and considerate in replying. and even bigger thanks for making this video. you gave me a moka pot i had given up on.
@@mesri3 You guys are having a good discussion here! Can I add that the problem is the design; the Bialetti gaskets, when tightened down only the very outside of the gasket ring gets compressed. So when the pressure starts to build, the water and steam simply escape AROUND the filter basket (bypassing the coffee in the filter!)... LOL mine does that too.. My generic cheap ebay moka pot - by examining it you can see just by disassembling it why it works so much better...
Holy wow what a difference. I was convinced that I was doing SOMETHING wrong even if I didn't know what it was. One wrap of the yellow Teflon tape (rated for gas so it's a little thicker) and 10 mins later I have a beautiful constant brew going for the first time since I bought this thing! You sir, are a hero!
But is it safe to put pvc tape in the hot chamber ??
can't thank you enough. this guy saved me from buying another $100 bialetti mokapot. love from australia. merry christmas you bloody legend :)
Wow, that's great to read from you, Kunhee!! I'm really glad I could help you!
Merry Christmas for you, too! :)
Don't know what I love more, the fact this simple video actually worked and I can get through the afternoon OR that there's so many coffee lovers gushing over this vid 😁. Thank you!
Had sputtering problems with a new Moka Pot. Tried everything, but nothing worked until I tried this. And it worked perfectly, thank you!!!
I have never, ever commented on a video before, but I am so grateful to you! I spent days searching for a solution to this problem before I found your solution. It was a very frustrating experience because I absolutely couldn't find anything wrong with my moka pot, but it stopped working after years of reliable service. This little solution solved my problem, and I couldn't be happier. Thank you!
Same first time commenting becuase this man made me so happy😂
Great tip, Vinnie. I struggled trying to figure out the problem, always thinking it was the gasket or the filter. Your solution is spot on. Many thanks!
Hey Marco! I'm glad I could help. I also struggled for a long time until I figure out that the issue had to do with the sealing around the funnel. Great brews for you!
I've been struggling with the moka pot so long until now, thank you a lot
Hey, I hope my tips could help you! Thanks!
You are the hero. I'm looking everywhere to find this solution. Thank you so much !!
Thank you, Mohamad! I'm glad my tips could help you!!
Great fix! This also implies that one should not knock their baskets out for cleaning. Though convienient, it will also knock the basket out of alignment.
That's a good point, Drane! It is important to avoid knocking it when cleaning.
I'm so glad I found you here. Now, I'm going to try to fix my moka pot. Thanks
The PTFE tip fixed my problem. Your explanation and the experiment made it very easy to understand. Thank you so much!!! 👍😃👏👏👏
Muitissimo obrigado, Vinicius. I had changed the rubber gasket for a brand new one and that wasn't it, still sputtering. Then I got my teflon tape which I normally have around for sealing my Highland bagpipe drones of all things, and did what you suggested. The coffee then came out on a steady flow, no sputtering, no noise, and it was a beautiful sight. Thank you very much. Brigadão, te cuida, parceiro.
thank you for this video and showing us what's the cause. i solved this issue by screwing the top and bottom chamber as humanly tightly as possible. Perhaps you guys should try to tighten it as much as possible first. If that doesn't work, then try other workaround like the one shown in this video
Thanks, this one works for me as temporary fix. Apparently I need to replace the rubber gasket because it somewhat became less flexible due to aging.
Thank you, I will try this next time before trying the tape too! I thought I had it on pretty tight, but everywhere I read people are saying you have to do it really really tight. Can be kind of hard though when you already have hot water in the bottom and it's a 9 cup moka pot :P
We have had this problem many times with many pots over many years. I tried your solution and it worked. Thank you very, very much!
This was one of the easiest fixes with one of the biggest impacts I have ever tried anywhere, especially when talking about coffee. Thank you so much, sir! I hope you have a wonderful day.
Hi Vini; Thank you so much for posting this video. I am sending my gratitude from Israel. The coffee was perfect! The Internet is wonderful for sharing information, to help each other, as you have done. Peace and health to all.
I changed my grind up and down, lowered and increased the flame under the pot, changed the beans to another brand but none of that made a difference, I would not get enough coffee into the pot, I was ready to give up on the mocha pot. BUT, this video saved it, I applied the plumber's PTFE tape trick and this fixed my problem. Thank you!!
Thank you so much for sharing the tip about the pipe fitting tape! I never would’ve thought of that
Thanks, Nikki! I hope it has helped you!
Thank you so much! 🙏🏻 I was so frustrated with my Moka pot.Your video helped.
Hi! I know how you feel, 'cause I was also pretty frustrated with mine. I'm glad I could help you! :)
Thank you so much for this information! You are amazing and so helpful. This solved my moka pot issue! No more coffee spraying out of the pot and all over the stove. Thank you Thank you Thank you - Such a simple fix with the plumbing tape : )
Genius, I tried everything and was about to turn into a yard sculpture, but then! And I had that tape on hand, so immediate gratification. I love DIY fixes. Thanks you my friend.
Great to read it from you, Marilyn! A Moka Pot is too precious to stand as a yard sculpture! It is way more interesting over your stove! Thanks!
Vinnie, you have saved the day! I bought new gaskets for my espresso maker and they just didn’t work. Your tip worked perfectly and now I’m getting coffee in the top of the pot. Definitely was getting cranky because I couldn’t get my precious expresso. Thanks again!!!!
Wow, that's awesome to read from you, Lou!!
I wish you great brews with your Moka Pot!!
Thank you for this video! I ran to my moka pot after viewing it & using your tips I brewed a cup & it worked perfectly flowed smoothly & tasted great!!
Thank you for sharing, we were so disappointed with our new pot that was having this problem. It’s all settled, we are enjoying our coffee now!
Wow, that's great to read from you! I'm glad I could help :)
I have a 1 cup, 3 cup and 6 cup Moka pots. I bought the 6 cup new and the 1 and 3 cup off of ebay, and they were both well used and needed the gaskets replaced. The 3 cup just hasn't worked right (same issue that you were showing here) and I noticed that the basket / funnel was a bit bent and mis-shapen. Not bad, but def not perfectly round. I bought a replacement funnel and that solved the problem. As the Moka works based on pressure, you need to ensure that it is very tight. This is a great tip and I'll remember it for the future if needed! Thank you!
You fixed our problem! Thank you so much! What an affordable and effective hack!
Wow, great! I'm glad I could help!!
Your video is a really good contribution to troubleshooting a malfunctioning Moka pot. Well done and thank you from Australia!
Thank you man! I've been struggling with my moka pot for months. I've just tried this and now I'm drinking an absolutely nice and drinkable coffee. Thanks
Hey, Julian! That's great to read from you! I'm glad I could help! Thanks!
Someone give this man an award! I received my first moka pot as a gift yesterday and after 5 attempts and spluttering since the beginning. Making a mess!! I found this video and saw the tape tip. I used washi tape because I didnt have the other one and it worked perfectly. And just now I made my first drinkable moka cup of coffee 😂😂💥🎉
I had exactly this problem, spluttering/ spitting while producing coffee. On an off chance, searched Amazon for silicone rubber o ring. I think it was 60 mm, 1.5 mm wall. Sits nicely where you put the ptfe tape. I think it was 3 or 4 uk£ for 10. Perfect! Now, it runs silently, the only sputtering comes when all the water has been pushed up through the coffee. My first Mike pot so it took me a while to realise it was working properly.
This is also an excellent solution, Bob! Great and thanks for sharing it!
This video deserves more likes. Thanks for the explanations.
Thanks for the comment, dude!
Super helpful thank you 😊☕️
yes! yes! yes! thank you man this solved my problem. I really thought it was my grind size. life saver!
Wow, that's awesome, Prince! I'm really help I could help solving your problem!
This is f... awesome. My pot was sputtering and the result was a burt coffee (and dirty stove). The solution with the tape made all the difference. I was jumping all around the kitchen watching the stream of black liquid coming out eavenly. I am now enjoying an exquisite brew. Thanks!!!
Wow, that's great to read from you, Federico!!! Thanks!
Finally a useful video, thank you! Will try as soon as i buy the tape.
Thanks, Joshua! I hope my tip has helped you to solve your problem!
This was EXACTLY my problem with my venerable 30 year-old moka and NO ONE here in Montreal could solve this problem. In the end I bought a new funnel and... voila! Problem solved - but I would have used your solution had I seen your video before. Well done!
Thank you so much. Spot on the problem I have, first attempt on gas stove was exactly like the video. Second attempt with more gas it almost caught me, spit a foot way. Finally after watching this, it starts to flow nicely. Appreciate that!!
Hi Mustafah! Wow, that's great to read that my video has helped you!! Have great brews!
well, what can I say? It works splendidly and you saved the life of my two coffe makers, a Bialetti and other very old, a Zanzibar. Thank you very much!!!
Wow, that's great to read from you, José! I'm glad I could help!
Hi Vinnie, you wonderful man, I've been battling with my Prezzetti moka all week, changed the rubber seal and upper filter, but no joy, then I tried your fix, incredible, I might now replace the funnel but for now it worked like a charm. Thank you so much. 😊
Hi, Gavin! I'm feeling honored with your comments, thanks! I'm really glad I could help you!
This works legendary advice Vinnie. Best cup i have ever had!
Tears of joy :-) can now finally go back to my moka pot, after having switch to a French press for the last few months
Thank you from Germany, Vinnie!! I almost bought a new Moka pot after using mine for about 12 years, since changing the parts you can change didn't seem to work anymore - but the tape did the trick!! :-) Here's to another 12 years! ☕️🖤
Hallo, Dario! Wie läuft alles? Es ist lange her seit ich kein Deutsch schreibe, aber ich werde es versuchen.
Das ist toll, dass meine Andeutung hat geholfen!
I'm really glad I could help you, Dario!
Greetings from Brazil!
I fell like I need to leave a comment to thank you for this video! The PTFE tape method works for me! I was ready to buy a new pot and your video helped me to save time & money! 😘 (Love from Singapore 🇸🇬 )
Wow, that's awesome, Clio!! I'm really glad I could help you and you didn't need to buy a new pot! Have great brews!! Greetings from Brazil 🇧🇷!!
Glad i found this video, as i was wondering if ptfe tape was possible to fix a leaking pot. Great find. Thanks very much.😉
May i add to this long list of very grateful people by saying you are a beautiful man ! This was confounding and frustrating the hell out of me ! Now i am happy again. X
Wow , that's great reading this from you!! I'm really glad I could help you and, as you say, make you happy again!! :)
Finally a solution that worked!! Hot water, fine ground beans, fixing the seal.. none of that worked. You are brilliant my friend! Thanks for posting.
I'm reallly glad I could help you make your Moka Pot work again!!
Thanks and excellent coffee brews for you!!
THIS IS AMAZING! Before the town I live in burnt down, and my moka pot with it, it had this problem ALL the time. At least now if my next one does this I'll know how to fix it.
Thanks, Angelus! I'm glad I could help!
Brother, you're a life saver. I got my coffee spurt on my face. I tried to find solutions but no result. But you saves me and my business. Thank you very much brother.
Thank you so much!!! I was worried I was going to have to b buy a new pot after trying so many times and watching so many videos to try to figure out what was wrong. Literally threw my hands up in celebration when it came up the right way.
This worked perfectly for me, thank you very much. For some reason, it wasn't working in my high altitude city, but the tape solved the issue wonderfully.
Thanks, Maria! This is great to read that my tips could help you!
finally something valuable.. super helpful man.. you just put my moka pot back in use after being in shelf for very long time
Wow, that's great to read from you, thanks! It makes me really happy to see that my tips could help!
What a great idea, thank you
This has saved my gnali & zani moka pot fro. the trash bin !!
I may added that i also put the tape on the thread of the moka pot..
Because i read somewhere that whenever the steam can find a way out other than the funnel, it will fail to come up.
Now it ALWAYS made a good job !
Thank You so so much for this tip !
Game changer nice work man nice work!
Man, it realy works to me! Many thanks for that cool little tip.
You are a Legend! Great fix. Thank you.
Wow, thank you! I'm glad I could help!
Wow!! Grazi mile! Fabulissimo! My machine finally works. After years of sitting in the cupboard, and I didn't know what was wrong with it.
I barely comment in any youtube video, but you my man deserve it. Thank you so much, i will subscribe for any future moka pot hacks 🙌
Wow, I feel honored by your comments! That's nice I could help you somehow! Great brews for you!
Legend. Proper coffee pot mechanic!
Hahaha, Thanks!
Super! Thank you for posting this. I was about to give up on the stove tops as this was the second stovetop of mine that ended up doing this..
That's nice to read from you! I hope I could help you! :)
Thank you very much I thought that I was doing something wrong with the heat, or not following the instructions, but after doing this fix I am able to do Mi coffee with this machine.
many thanks, had just bought a Chinesium moka pot that brewed too fast, now it works right.
Thank you! It’s working now. Great solution.
This content is GOLD.
Thank you, Mark!
Thank you! That did the trick. Now I know to be much more gentle with the funnel when cleaning it. I've been tapping out the grinds into the trash for years, which definitely has slightly deformed the funnel shape. No more doing that!
Hey, Ted! Great to read this from you! Yeah, it is important to be gentle with the funnel. Thanks!
Just take the funnel, with the coffee grounds inside, put your mouth on the long tube and blow. Easy peasy.
IT WORKED!! God bless this man!
Great, Sapphirine! I'm glad I could help! :)
Brilliant! I'm going to apply your solution this week.
Great! Please tell me later if it has worked!
thanks you so much! i tried this with my cheap-off moka pot (not the bialetti) & it's works fine now.
Thank you for sharing that tip.. It was GENIUS!
Thanks, Lori! I'm glad I could help! :)
You're a genius, thank you!
Thanks for you video, it helped me solved my problem after installing a new gasket, i think my problem was a combination of several things, deformed funnel, new gasket probably no seating in as well as the previous one and not screwing the top enough as i did not need to tighten it too much before. The PTFE surely did not do any harm but the water was coming up before i added it. My previous gasket was absolutely fused to the pot.
Hey J-M-P, I'm glad I could help you! You're right, there are some things that influence on the performance of the Moka Pot, and sometimes the problem comprises more than just one factor.
That was really helpful! Thank you :)
Great video! Thank you Vinicius!
Thanks for the tip brother.
Thanks a lot, man you saved my Moka pot life 😂
This fixed my pot, thank you very much Vinnie 😀 I
Hi Jason! You're welcome! I'm glad I could help you with my tips!!
That tape trick works!!! Have a 25 year old pot that was kayboshed recently. Was going to throw it as was struggling to find a gasket that fits. Anyway sorted. Thanks!
Oh man you're the best. Thank you for sharing this video.
Hi Bernardo! I'm glad my video could help you!
I’m so glad I found this video; I bought a Bialetti years ago and it worked fine but I bought one recently where the coffee was barely coming out! I exchanged it and the same issue happened with the new one and the steam escaping; not sure why so many have this manufacturing defect?
You are a LEGEND 👌💙
Trillions of thanks for this tape idea...my moka pot got new life....coffee is tasting so so so so much better, and because of this my days are turning out to be much better.....if we ever meet in life.....coffee is on me!!!!! for now am subscriber your channel!!!!!
Hi Maneesh! I'm very moved with your comments!! That's amazing to read that now your coffee is waaayyy better and, because of that, your days, as well!
Ok, that's a deal, if we once meet, I'll be waiting for my coffee!!
By the way, where are you from?
Thank you very much and great brews for you!!
@@viniciusandrea3251 so sorry for late reply, i was out on a road trip, in heartland and deep inside mountains and jungles, happily brewing coffee in moka pot....am from India, and i can take u around for some good coffee and we will also brew it together....
works like magic! thank you 😁
Great! I'm glad I could help! 🙂
This worked for me !
Thanks you so much !
Dude this is awesome!! I buy one this past Sunday and I was so sad cause it was not working, for a second I thought that it was all my fault cause I bought a big one (12 cups), and now is working!!! glad I didn't had to return it, thanks a lot, greetings from Mexico
Hey, Israel, how are you? Thank you, that's great to hear I could help you!!
Greetings from Brazil 🇧🇷!!
Amazing! Thank you very much!
you don't believe how thankful i am for this, i had tried EVERYTHING! I had mastered a smaller moka pot pretty well and bought a bigger one from a flea market a while back just to notice it sputtered like hell every time i used it no matter what I did and it was so frustrating when nothing i had done with the smaller one worked on the big one, even when adjusted for the bigger size. BUT NOW IT WORKS FOR THE FIRST TIME AFTER MONTHS OF TRYING! for some unknown reason i actually even had this tape in my closet after several konmari purges; not even knowing what it was i had kept it for years, so i guess now i found out why? :D THANK YOU
Hi Kauheaa! Wow, that's great reading that from you! The tape was waiting to be your Moka Pot Savior!
I'm really glad I could help you! Now, enjoy your coffee! :)
Konmari purge refugee saves the day - LOL. My clothes are all folded correctly and vertical, but I could use a few more purges myself. Who knows what I'll find!
Great video, I’ve only had this problem once, and it was when I bought preground coffee. Usually I grind my own and it works great. The preground coffee was made for drip, so it shouldn’t have sputtered. Not sure what happened. Regardless, great video and a genius solution to the problem. I would love to see other tips with how you brew your moka. Hot water vs cold water at the beginning, what grind size, and how much heat you apply. Thanks!
Hi, Jay! Thanks for your comments and video suggestions! 😃
dude, you are just a wonderful man,such a great tip, such an easy solution for my big problem. thank you
Wow, thank you! I'm glad I could help! :)
thank you very much for your tips!
i just bought my Bialetti Moka Pot for 3 cups & the coffee kept sputtering.
i will definitely try this tip!
Many thanks from Malaysia brother!!
i really appreciate your video!!!
Wow, thank you very much for your comments! I'm really glad I could help you!
Caramba, muito obrigada! Estava passando por isso com uma moka de 9 xícaras que eu comprei, marca genérica... eu não sabia o que podia ser e estava muito decepcionada e frustrada, mas com a sua dica consegui resolver esse problema. Finalmente posso voltar a beber meu café mais intenso graças a você! Muito obrigada!
Ah, que legal ler sua mensagem, Ana! Fico feliz que pude ajudar! :)
Your video was a real revelation to me, Vini. I had always thought that the sole purpose of the gasket was to stop the coffee that enters the funnel from escaping through the screw thread that binds the two compartments. It had never occurred to me that the gasket is also there to stop steam and potentially hot water escaping from the lower compartment through the gap between the rim of the funnel and the rim of the lower compartment. Your demonstration shows this brilliantly.
This has made me understand better how my Moka pot works. But it has ALSO made me question some of my fundamental assumptions I had made until now about what is happening in my pot.
I have learnt over the years that each time I replace the gasket, I can expect a livelier brew for the first five or so days, in which the brew takes longer, there is a clear and throaty sound as it rises through the column in the upper compartment, and it will start sputtering earlier. The more the gasket gets seasoned, the more the pot returns to normal brew times and to a silent trickle as the coffee comes out of the column.
I had assumed that the new gasket provides a firmer seal, that this raises the atmospheric pressure in the pot, and that it is this that causes a longer heatup time and a livelier brew. But I am now wondering whether the reverse is true: that the gasket needs time to perfectly mould itself to the rim of the pot, and so the first brews are longer and livelier due to a less efficient seal (and consequently *lower* atmospheric pressure in the lower compartment) and this is why a new gasket can cause longer heatup times and livelier brews. So can you explain which of these two (or maybe neither) is so??
If I can understand better how the Moka pot works, I wil be able to make better Moka coffee and more easily resolve some of the problems we can encounter from time to time 😉.
-------------------------------------------
After well over 10 years (probably nearer 20) of making Moka coffee daily, I can honestly say this is the *_best_* and most useful TH-cam video I have ever seen on the Moka pot. I very much hope you will post more videos with tips on how to further improve our Moka brewing skills ☕!
-------------------------------------------
By the way here is the context of how I came across your video:
I had just changed the gasket on my 3-cup pot and, though I am used to a new gasket causing a longer brew with sputtering starting much earlier for the first five or so days resulting in an over-extracted flavour, this time I was getting alarmed that it was remaining the same for much longer than five days (with the sputtering starting right from the beginning of outflow) and with no immediate prospect of resolution.
I then found your video that explained *_so well_* what was happening. I first followed *@blobscott's* advice in his post (written _"1 month ago"_ at the time of my writing this post) and then, though experiencing real progress, felt nevertheless that progress was insufficient and so added your trick of adding PTFE teflon tape to the rim of the funnel. I'm not sure whether the PTFE tape added further improvement or was just duplicating what I had already achieved with @blobscott's advice, but certainly the result is already a great improvement on what I was experiencing until then. I'm still experiencing long heatup times, and a livelier brew (i.e. faster outflow, & some noise as it rises through the column) but it is no longer sputtering from the beginning of outflow. The sputtering comes at the end as it should do.
-------------------------------------------
So anyway, I very much hope you can find time out of your doubtless busy schedule to answer my question from paragraphs 3 and 4 😁.
Hi! Sorry for the late answer.
I hope to find you well and healthy!
Well, unfortunately I don't have the answer to your questions. I have to admit I'm not a experienced coffee maker, I just applied my experience from my formation in Physics and from my Laboratory experience for making my PhD studies.
My hypothesis, tough, is that there is no considerable difference in the atmospheric pressure inside the boiler when the rim between the funnel and the boiler. But maybe I'm wrong and you seem to have much more experience and knowledge in this topic than me! I'm just a coffee lover who wanted to fix his Moka Pot and help everyone who were facing the same issue : )
@@viniciusandrea3251 Dammit! I just wrote a long answer to your reply and then I accidentally closed the page (before copying to clipboard) ☹. Anyway the gist was:
1. I've learnt a great deal thanks to your video, and I've understood even better how my Moka pot works through your excellent demo *_since_* writing my previous post (as I said, the best video I've found on the internet so far about the Moka pot - and I've seen a bunch)!
2. Please do add a video to your channel (or two, or three) if you make any other discoveries that can help us make more delicious Moka coffee. I've subscribed to your channel to that end.
Also, if I find a moment, I'll write my post again sometime or other!
This is brilliant. Using Moka Pots for years, and mine was making good coffee, even though it was leaking at the chamber joint. The gasket was hardening, so, I changed out the gasket. After putting in a new gasket, had gurgling from the very beginning and not all the water would boil out. Looked at this video and applied two rounds of pipe joint tape as instructed. Works like a charm, and as an engineer, knew this made complete sense as soon as seeing the video. The coffee is stronger, too. It's one of those, "now why didn't I think of that" fixes. If you have an older pot, try this before you do all the fixes with the grind of the coffee, the water temperature, the fire temperature, etc. Over the years, the funnel and chamber fit get out of round, and this solves it. Thank you!!!
Thanks, George! That's awesome to read from you! Yeah, I felt the same as you when I came up with this idea: why haven't I thought this before!!!
Anyhow, I'm glad I could help!
Same for me!
Thanks a lot! It is very helpful!
Thank you for solving my problem .A clever solution.I apriciate.
Thank you so much for making the video. that's awesome
thanks so much for this tip, I took out my old MokaPot today after a long time of not using it and wasted so much quality coffee grounds. It sputtered everywhere. Will get to it and report back
Amazing video. Thanks so much for these tips !!!!!!🎉❤