For Manual it’s the same thing except you leave it in neutral of course. Worked great 👍 Thank you for this video. Had my alternator and starter changed and this started happening. Was told to use a injector cleaner aka gas additive. I did but that didn’t work. This video solved my issue. 🙏👍🇺🇸
Anytime. Also a few notes. I was having this issue again because I tried to reset the idle at work early in the morning, which screwed it up, because my lights were on. You cannot have your lights, fan, accessories, AKA camera, charger nothing plugged in or on while doing this. There needs to be no extra load. Hope this helps.
Hey help me I just trplace the battery and now my car start but go to zero Rev so fast no stay on what can I do.. the can no had any issues before I replace the battery and that's all what I did.. I don't want to take it to the mechanic cuz the car was Running perfect before I replace the battery please help
My wife's 2002 Toyota Sequoia's headlight switch went out. While I was working on that, I unhooked the battery for about 45-60 minutes. When I installed the new switch and put everything back together, the car ran rough and wouldn't idle. I thought I did something wrong installing the switch, even though I knew I did it correctly. I had no idea about this issue until I did a search for 'rough idle' on the vehicle. I found your video, and I fixed it in minutes! If I would have taken it to a shop, they probably would have charged me a couple hundred dollars for nothing! THANK YOU!!
This could be the best video on TH-cam 😀 Short, to the point and works. That's what videos are supposed to be. Thank you so much man, I really appreciate it 🙏
Almost cried after having my 2002 RAV4 break down at work getting it towed home replacing the alternator and battery and then having an extremely rough idea to the point I almost lost my mind thinking it was another issue. Thank you thank you!!! This WORKS it's such good information that no one tells you to do after changing parts and disconnecting the battery! God bless you!!!
Had my 2004 4 Runner alternator replaced. The next day it was idling very rough and below 500 RPMs. Did this procedure... purring like a kitten again. Thanks so much for the knowledge!
Omg!!! I don't know how to thank you for making this video. So my battery finally gave up and a little time before it died my car felt very heavy on the accelator. When the new battery was installed ny 05 4.0 4runner wouldn't pass 500 rpm and was about to turn off. I did what you said and my car is running great again! Thank you!!!!!
this saved me from replacing a lot of idle sensors and hassle. Had a blown starter fuse and removed my battery to trouble shoot some issues and my tundra was idling really bad once I got everything else replaced. I thought it was my MAF sensor or the TPS sensor but did this reset and now my truck idles smooth. Thanks again!
Just to be clear, after the ignition is turned on and off two times, the next step is to START the engine (not simply "CRANK" the engine as stated here). As to applying the parking brake after starting car, I'm sure that this procedure would work if the parking brake was applied at the get go. The point of applying the parking brake is to avoid moving the car when the transmission is subsequently put into Drive. Obviously, perhaps, you should also remain in the car once it is started and place into Drive. It might even be a good idea to rest your foot on the brake pedal because sometimes parking brakes will not hold a car still which is in gear especially if the idle is too high.
@@cbrbimmer1 it is interesting to see how people will try to mislead others without any knowledge on the matter. 😂 The video literally saved me on the road.. Just taken the car from my mechanic - he had removed the battery while working on it. And on the way i noticed the idle was really really LOW only to have the car die on me in traffic - twice. Reached home safely, thanks to the video and some of the comments, yours included.
Just reset my codes after changing a couple ignition coils... disconnected my battery just to reset things after the reset of codes...2003 4runner... fixed the power problem but then my idle was still low. THIS brought my idle up to a healthy normal idle! Great video, thank you!!💯
Wow, this technique really works, I just had the starter replaced on my 2005 Lexus RX 330, and I followed your step by step instruction and magic, the RPM came back to its normal 800. Thank you so much sir for this very valuable tip, more video tips please 💪
This is not a gimmick it really works. Followed the instructions and after 7 min turned off the car and idle is perfect Thank you so much for your help!
Gave this a go on my 2008 Toyota RAV4 2.0 petrol (Manual). Worked a treat. I have been experiencing the car trying to rectify the idle when at a traffic light, was really annoying and wasn’t pleasant to drive. This process took around 5 minutes and the car is running great now. NB: if you have a manual leave it in neutral while doing the steps in the video. Make sure the vehicle is warm when doing this and make sure the lights, fan/AC or anything that will draw power is turned off. Thanks again, very well detailed video.
Thanks heaps! This worked like a charm. It ran beautifully after following your instructions. I was actually surprised at the difference. It was even better than before the battery was changed. It must have been sluggish since the previous battery change in 2019. Wow, so simple. Thanks again. Much appreciated!
Excellent video. Unhooked the Battery terminal 1 month ago as some work panel & paint on 2000 Spaccio auto. When finished work and erconnected battery throttle was idling fast 1300rpm and when hot 1800 rpm. Was dangerous driving in Traffic. External throttle adjustment screw was not touching any on the body so wasn't that, so had to be internal in throttle body or Engine Management Unit. Found this video and undertook instructions for about 20 mins. all good now. Back to normal now so thanks for your video Walker.
Just did this on my son's 2000 tundra and worked like a champ. Battery went bad and had to be replaced. After that it was idling low and if you revved the motor it would drop to about 300 rpm and shut off. Went through these steps and while watching the tac and you could actually see it learning the new level. Started with low rpm and over about 5 minutes it seemed to slowly bump up about 50 rpm every minute or so until it settled in over about 5 minutes.
This also works on Pontiac Vibe, as I have a 2009 and your method worked perfectly. My mechanic told me the throttle body needed to be cleaned, bullshit, did nothing other than cost me money. I can not thank you enough. All the best, Dave & The Girls
OMG THANK YOU!!!! FIRST TRY AND BAM!!!! after one hour of me trying to figure out what was wrong, I came across this video!!!! I'm so relieved!!!! People kept telling me there was alot wrong but my truck was fine till I left the lights on and took the battery to recharge.
Thank you so much. Bought a 120 prado second hand. The car started idling at 400rpm and then stalled at traffic lights when it was warm. I started to panic about repair costs. Thank you so much for this video
I have to apologize I thought this was going to be BS. I just change the alternator on my Toyota siena and the idle was so low that the AC compressor wouldn’t stay on just click on and off repeatedly. I went and tried this and now the problem is solved thank you sir!
Amazing video, the idle problem caused me headaches and I even changed the coil pack after replacing with a new battery. This method solved my problem!
Mostly worked on my 2008 Avensis. RPM was almost stalling at idle but this got it up to ~500RPM. Comfortably it should be ~700 but at least it's not shaking or sounding like stalling. Thanks for the video!
How did you do this for a manual? I have a 2010 XB manual. What about the last step when it says put it in drive? What is the step for a manual? Thanks!!!
@@terraphleb I watched the video again to jog my memory. I pulled the brake on, pushed the clutch in and put it in first. Eventually the car went to about a little under a 1,000 rpm idle and smoothed out. I’m 90% on this.
I have to admit I had my doubts. Just had a new transmission, throttle position sensor, and IAC valve put in by my mechanic on a 2001 Toyota Tacoma Doublecab with 390,000 miles. The idle in park was at 1500 cold and 1200 warm. Idle in drive was sitting at 1200, street speed of 30mph at 1500, and at highway speed of 65mph it was at 2500 the whole way. Acceleration on highway to pass cars was pinging at 3200. With overdrive off, it was nearly redlining. Was gonna take it back and have it adjusted until I stumbled on this video. Gave it a try and it dropped my idle in park to around 900 and street speed of 30mph at 1100 to 1200. Will give it a try on the highway next. This just saved me time and distance to take it back. Will see if this lasts.
How'd this work out long term? Had high idle issue after I replaced IAC, 1500 and even higher idle after I replaced tps, 2200. Thinking I have to recalibrate these sensors but I don't have a scanner tool.
Just want to point out; on certain models with electric locks, you going to need to close all doors to activate locks upon turning it on. Besides that, video is accurate and on point without all the extras everyone uploads videos with. Thanks.
Good information battery died on me i installed a new one and it started idling rough watched your video followed your directions and 10 minutes later my car was back at a smooth idle
Worked on my 2003 Rav4. Was running consistantly low at 500 rpm after having to drive it on 3 cylinders to get it to a mechanic. It was idling rough and flat spot on take off. Tried this trick and it now sits at 750 rpm and no flat spot. Thanks very much for the info Walker.
Even though I know the process by heart now every time I disconnect my batter I watch this and follow the instructions because I love the way he says it, on then off then on then off lol the way his voice goes up and down I love it lol
Just tried this on my 17 Tundra. At start it would idle around 12-1300 just didn’t seem right. So far it’s 750 after doing this! I guess time will tell if it’s fixed or not...
Nice video, I replaced new battery on 2009 Toyota Corolla then the idle rpm at 500, feels like dead on idle waiting on traffic lights, it’s pretty scary thank you for your video. It helps me resolve the problem. Thank you.
Wow it actually worked. That's amazing thank mate your big help. It didn't at first because I was rushing the whole process so I tried again with patients and came to my surprise it really did work. Just perfect.
hot dog that was easy! thanks for posting. i saved it along with some others, and im starting a library of sorts for my car, so i have quick access without having to search later.
Does this work if the RPM's are idling really low as well? It seems like a lot of people are saying their RPM's are high and then this trick fixed it and got the RPM's lower..I had my starter replaced and my battery died and was rehooked back up and now my RPM's are really low and rattly, and the sound gets really bad when the RPMs dip low into the 500 range. Thanks
Thank you very much for this vedio. My car started this Morning and drove for 10-20 minutes. I felt different noise. When I came in front of my garage it stopped. Tried to jump start but it started and died immediately. Took to AutoZone and changed battery . Started car but it will start but dies immediately. Checked alternator and replaced new. Started car but it will stop minute I remove foot from gas. Mechanic told to drive around and it will rest up. He told me if it did not work may have to reset with machine. I drove home with 3-4 stop . I found this vedio and did exactly and idle was reset to 500 rpm. Now it starts.
thx buddy worked on my 4runner 2004. Cant put in drive as brake cylinder is failing but after a battery jump start rough idle kicked in and made check engine turn on. Disconnected battery for 10 min for ECU to reset, did the trick twice, put handbrake and just revved above 700rpm por approx 5 minutes like real life conditions. Idle settled at 600rpm and no more check engine. Time to fix brake now.
Hello, does the car have to be running to do this or just in the ON position. My 1999 RX300 doesn’t want to idle and keeps stalling out. Please let me know. Thank you!
Wow. Seems to have worked on my hybrid. Just did the same sequence and waited for the engine to start itself again, about eight minutes like you said. Thank you.
Question Replace the battery 2004 highlander works good but when I press the gas pedal hard it stops working I have to turn off the car and press the pedal slowly for it to work. What can I do? I already did what the video says
I have a Toyota belta 2005 with keyless ignition and an automatic gearbox, tried this method but unfortunately, it did not work for me. will try it again and post if i have any success tks
Well, my son's 2005 Corolla had been revving a little bit high and could not fix it by cleaning chokes, replacing O2 sensor etc. I should have known this before trying things that did not work. Thank you very much!
My friends ac works great but stops blowing cold at idle. I hear that 600 to 1000 rpm is right, but his won't come back on till its above 1000, I think 1100 or 1200 rpm. Ideas? Air control valve? Or Reset as in this video? 2002 Highlander. Thanks....
I had my battery/alternator replaced and needless to say the revs were waaaaay down. Followed these instructions and the revs climbed within seconds to a smoother level. Thank you very much. :)
Omg thanks I was about to take it to a mechanic, wooow it really worked on my 2008 tacoma, I had just replaced the battery notice the rpm when really low, this fix the problm thanks alot.
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบ 8 ทีมสุดท้าย] - ช่วงบ่าย](http://i.ytimg.com/vi/M0S_ReCIkxg/mqdefault.jpg)
For Manual it’s the same thing except you leave it in neutral of course. Worked great 👍 Thank you for this video. Had my alternator and starter changed and this started happening. Was told to use a injector cleaner aka gas additive. I did but that didn’t work. This video solved my issue. 🙏👍🇺🇸
Thanks for this!
Anytime. Also a few notes. I was having this issue again because I tried to reset the idle at work early in the morning, which screwed it up, because my lights were on. You cannot have your lights, fan, accessories, AKA camera, charger nothing plugged in or on while doing this. There needs to be no extra load. Hope this helps.
OMG thank u
Hey help me I just trplace the battery and now my car start but go to zero Rev so fast no stay on what can I do.. the can no had any issues before I replace the battery and that's all what I did.. I don't want to take it to the mechanic cuz the car was Running perfect before I replace the battery please help
Thanks from Australia have a blessed day friend !
My wife's 2002 Toyota Sequoia's headlight switch went out. While I was working on that, I unhooked the battery for about 45-60 minutes. When I installed the new switch and put everything back together, the car ran rough and wouldn't idle. I thought I did something wrong installing the switch, even though I knew I did it correctly. I had no idea about this issue until I did a search for 'rough idle' on the vehicle. I found your video, and I fixed it in minutes! If I would have taken it to a shop, they probably would have charged me a couple hundred dollars for nothing! THANK YOU!!
Reading all these comments of affirmation sitting in my car while waiting in this procedure is the best. Thanks again for the video!
This could be the best video on TH-cam 😀
Short, to the point and works. That's what videos are supposed to be.
Thank you so much man, I really appreciate it 🙏
Almost cried after having my 2002 RAV4 break down at work getting it towed home replacing the alternator and battery and then having an extremely rough idea to the point I almost lost my mind thinking it was another issue. Thank you thank you!!! This WORKS it's such good information that no one tells you to do after changing parts and disconnecting the battery! God bless you!!!
Had my 2004 4 Runner alternator replaced. The next day it was idling very rough and below 500 RPMs. Did this procedure... purring like a kitten again. Thanks so much for the knowledge!
Did this in a 2002 tundra 4.7 and it worked great! Had no idea of this procedure, thanks!!
I got the same year and I'm trying this tomorrow. I had some work done a week ago and it's been running high ever since.
Worked on my 05’ Camry . Mechanic wanted to help me fix it for $65!
Thank you for this, it is much appreciated 🙏
Omg!!! I don't know how to thank you for making this video. So my battery finally gave up and a little time before it died my car felt very heavy on the accelator. When the new battery was installed ny 05 4.0 4runner wouldn't pass 500 rpm and was about to turn off. I did what you said and my car is running great again! Thank you!!!!!
this saved me from replacing a lot of idle sensors and hassle. Had a blown starter fuse and removed my battery to trouble shoot some issues and my tundra was idling really bad once I got everything else replaced. I thought it was my MAF sensor or the TPS sensor but did this reset and now my truck idles smooth. Thanks again!
Just to be clear, after the ignition is turned on and off two times, the next step is to START the engine (not simply "CRANK" the engine as stated here). As to applying the parking brake after starting car, I'm sure that this procedure would work if the parking brake was applied at the get go. The point of applying the parking brake is to avoid moving the car when the transmission is subsequently put into Drive. Obviously, perhaps, you should also remain in the car once it is started and place into Drive. It might even be a good idea to rest your foot on the brake pedal because sometimes parking brakes will not hold a car still which is in gear especially if the idle is too high.
This is to fix a low idle condition.....so I don't think anyone has to worry about a high idle situation
True, i am doing that now and the car obviously started rolling.. Foot on the brake is a must i believe.
@@m.anthonyc.8761 Thanks for the bone-headed response. Always interesting to hear what the bottom half of the IQ-curve has to say.
@@cbrbimmer1 it is interesting to see how people will try to mislead others without any knowledge on the matter. 😂
The video literally saved me on the road.. Just taken the car from my mechanic - he had removed the battery while working on it. And on the way i noticed the idle was really really LOW only to have the car die on me in traffic - twice.
Reached home safely, thanks to the video and some of the comments, yours included.
@@cbrbimmer1 does this work on a manual..?
Just reset my codes after changing a couple ignition coils... disconnected my battery just to reset things after the reset of codes...2003 4runner... fixed the power problem but then my idle was still low. THIS brought my idle up to a healthy normal idle! Great video, thank you!!💯
I'm going through what you just described, and I'm doing the process in this video, hopefully it helps
Wow, this technique really works, I just had the starter replaced on my 2005 Lexus RX 330, and I followed your step by step instruction and magic, the RPM came back to its normal 800. Thank you so much sir for this very valuable tip, more video tips please 💪
Worked on my 2008 Toyota RAV4. Saved me a lot of time and money!
Beautiful! Short, sweet and to the point. And it totally worked on my 08 4Runner V6.
This is not a gimmick it really works. Followed the instructions and after 7 min turned off the car and idle is perfect
Thank you so much for your help!
Gave this a go on my 2008 Toyota RAV4 2.0 petrol (Manual). Worked a treat.
I have been experiencing the car trying to rectify the idle when at a traffic light, was really annoying and wasn’t pleasant to drive. This process took around 5 minutes and the car is running great now.
NB: if you have a manual leave it in neutral while doing the steps in the video. Make sure the vehicle is warm when doing this and make sure the lights, fan/AC or anything that will draw power is turned off.
Thanks again, very well detailed video.
Just did this. Worked exactly as shown. Thanks for the video.
Thanks heaps! This worked like a charm. It ran beautifully after following your instructions. I was actually surprised at the difference. It was even better than before the battery was changed. It must have been sluggish since the previous battery change in 2019. Wow, so simple. Thanks again. Much appreciated!
Excellent video. Unhooked the Battery terminal 1 month ago as some work panel & paint on 2000 Spaccio auto. When finished work and erconnected battery throttle was idling fast 1300rpm and when hot 1800 rpm. Was dangerous driving in Traffic. External throttle adjustment screw was not touching any on the body so wasn't that, so had to be internal in throttle body or Engine Management Unit. Found this video and undertook instructions for about 20 mins. all good now. Back to normal now so thanks for your video Walker.
2008 4.0 Tundra went from 1094 to 647! Thank you!
2006 hilux workmate manual.
Worked.
Mine is manual i just left it in neutral.
No more almost stalling and shakes.
Thanks
Just did this on my son's 2000 tundra and worked like a champ. Battery went bad and had to be replaced. After that it was idling low and if you revved the motor it would drop to about 300 rpm and shut off. Went through these steps and while watching the tac and you could actually see it learning the new level. Started with low rpm and over about 5 minutes it seemed to slowly bump up about 50 rpm every minute or so until it settled in over about 5 minutes.
Hey so did it still work out or did the problem come back
@@flaimed7376 worked like a champ and stayed running
This also works on Pontiac Vibe, as I have a 2009 and your method worked perfectly. My mechanic told me the throttle body needed to be cleaned, bullshit, did nothing other than cost me money. I can not thank you enough. All the best, Dave & The Girls
Toyota Allion 2015 (JDM) worked perfectly as instructions. Thanks a lot for sharing helpful information❤.
OMG THANK YOU!!!! FIRST TRY AND BAM!!!! after one hour of me trying to figure out what was wrong, I came across this video!!!! I'm so relieved!!!! People kept telling me there was alot wrong but my truck was fine till I left the lights on and took the battery to recharge.
It's a really good video worked with my first try thank you
Thank you so much. Bought a 120 prado second hand. The car started idling at 400rpm and then stalled at traffic lights when it was warm. I started to panic about repair costs. Thank you so much for this video
After an alternator change; worked exactly as shown. Thanks!
I have to apologize I thought this was going to be BS. I just change the alternator on my Toyota siena and the idle was so low that the AC compressor wouldn’t stay on just click on and off repeatedly. I went and tried this and now the problem is solved thank you sir!
Amazing video, the idle problem caused me headaches and I even changed the coil pack after replacing with a new battery. This method solved my problem!
2016 tundra!! Changed my alternator, worked like a charm
Thanks so much for the video, this worked on my 2005 Toyota 4runner!
Mostly worked on my 2008 Avensis. RPM was almost stalling at idle but this got it up to ~500RPM. Comfortably it should be ~700 but at least it's not shaking or sounding like stalling. Thanks for the video!
Changed PCV valve on 06 sequoia and all of a sudden weak idle and kept stalling. Found this video and back to normal! 🙏 thank you for sharing
Works great, idle rpm 1.5k down to 900... much harder on other model cars... thanks
Wow! Worked like a charm...I used this procedure on a Toyota Mark II Grande 2001 model with a 1G Beams 2000 vvti engine.
Wow, this technique totally worked on my son’s 2017 Corolla! Thank you for this video!!
Fixed my manual ‘09 Matrix after changing the battery then following the steps. Thank you!
How did you do this for a manual? I have a 2010 XB manual. What about the last step when it says put it in drive? What is the step for a manual? Thanks!!!
@@terraphleb Hi, I either ignored the step, or put it in first with the clutch in.
Did you leave in neutral or put it in first with the clutch on? Can you recall? Thanks for responding!
@@terraphleb I watched the video again to jog my memory. I pulled the brake on, pushed the clutch in and put it in first. Eventually the car went to about a little under a 1,000 rpm idle and smoothed out. I’m 90% on this.
I have to admit I had my doubts. Just had a new transmission, throttle position sensor, and IAC valve put in by my mechanic on a 2001 Toyota Tacoma Doublecab with 390,000 miles. The idle in park was at 1500 cold and 1200 warm. Idle in drive was sitting at 1200, street speed of 30mph at 1500, and at highway speed of 65mph it was at 2500 the whole way. Acceleration on highway to pass cars was pinging at 3200. With overdrive off, it was nearly redlining. Was gonna take it back and have it adjusted until I stumbled on this video. Gave it a try and it dropped my idle in park to around 900 and street speed of 30mph at 1100 to 1200. Will give it a try on the highway next. This just saved me time and distance to take it back. Will see if this lasts.
How'd this work out long term? Had high idle issue after I replaced IAC, 1500 and even higher idle after I replaced tps, 2200.
Thinking I have to recalibrate these sensors but I don't have a scanner tool.
@emc4685 so far so good. It just passed smog check last month
how bout now champ
@@Coqui02 it's been running flawless.
@@8x10proofs just bought a 98 sr5 good to know, might try it out. Thanks!
Works perfectly on Toyota & Scion 2008-2016 ❤.
Just want to point out; on certain models with electric locks, you going to need to close all doors to activate locks upon turning it on. Besides that, video is accurate and on point without all the extras everyone uploads videos with.
Thanks.
Good information battery died on me i installed a new one and it started idling rough watched your video followed your directions and 10 minutes later my car was back at a smooth idle
Worked on my 2003 Rav4. Was running consistantly low at 500 rpm after having to drive it on 3 cylinders to get it to a mechanic. It was idling rough and flat spot on take off. Tried this trick and it now sits at 750 rpm and no flat spot. Thanks very much for the info Walker.
Even though I know the process by heart now every time I disconnect my batter I watch this and follow the instructions because I love the way he says it, on then off then on then off lol the way his voice goes up and down I love it lol
Many thanks from Turkey, it really worked on avensis 2005 2.0 !!!!
Merhaba, Araç otomatik mi manuel mi abi senin? Manuel de nasıl yapacağız bu işlemi acaba?
Wow, it did work,.....i ordered a alt,after my battery went bad, camry would not idle. Thank you!
It worked on the second try on my 2002 Sequoia. Thanks.
Did you just follow these steps? And how did you know if it worked?
Worked perfectly for 2010 Yaris! You’re the man!! 🍻
Thank you! This worked perfectly on a 2004 Rav4.
Either it doesn't work on a 2005 corolla or I got something wrong. When you say crank the engine you mean just turn it over or start it ?
God bless everyone helping others! Thank you brother!
Thanks so much I have made it on my Toyota chaser and I happy.the idle is back to normal.
THANKS a lot bro..ITS WORK IN MY TOYOTA IST 2002 after i clean my throttle body..
Wow it works in an instant on my 2009 yaris dude. I appreciate this content much
OMG - just fixed my 2005 tundra with this fix ! Awsome TY TY
I have an 05 tundra that has a high idle on cold start. after it warms up its idles at normal RPMs. was yours the same way?
@@patrickanderson8732 yes it will go from 1200 rpm to about 800 after 10 min.
Just tried this on my 17 Tundra. At start it would idle around 12-1300 just didn’t seem right. So far it’s 750 after doing this! I guess time will tell if it’s fixed or not...
what was the result?
I cannot believe this worked on my lexus! Thank you very much.
Awesome. worked for my 2008 Corolla
Thx man I did what u said. And did work right a way. Like in 1 min. But I still wait until 7 min. Thx a lot. 😁😁
Nice video, I replaced new battery on 2009 Toyota Corolla then the idle rpm at 500, feels like dead on idle waiting on traffic lights, it’s pretty scary thank you for your video. It helps me resolve the problem. Thank you.
Thank you I appreciate,I just applied it and it worked for my 2010 Corolla.Once again,thanks.
Wow it actually worked. That's amazing thank mate your big help. It didn't at first because I was rushing the whole process so I tried again with patients and came to my surprise it really did work. Just perfect.
My car is a 2008 tundra 5.7 I did exactly what you say in the video and works perfectly thank you very much man
I am very appreciated for your instructions.
Perfect, it worked after 8 minutes.
Thanks again
It worked for 2004 Toyota Rav4 ! Thank you so much !!!
Dude thanks for putting this video up. Works like a charm! 🤙🏼
I can't believed this worked on a rav4 1998, thank you
Nice to read your post. I'll be trying it tomorrow on my '98 RAV.
Worked on my rav4 2005. Great advice my friend thank you.
worked great on my 04 Sienna. Thank you!
Thank you sir! Totally worked on our 2011 Rav today. Owe you a beer! Dave in RI
This worked on my 2005 Tacoma thanks so much for this video
It worked on my manual celica :) i think it drop to 900 better then to what it used to be, ot was on 1.5 revs.
Could you describe what you did with transmission ? He turned it to drive and left it, how about manual transmission ?
Did you put it in gear?
What did you do? For manual
hot dog that was easy! thanks for posting. i saved it along with some others, and im starting a library of sorts for my car, so i have quick access without having to search later.
Does this work if the RPM's are idling really low as well? It seems like a lot of people are saying their RPM's are high and then this trick fixed it and got the RPM's lower..I had my starter replaced and my battery died and was rehooked back up and now my RPM's are really low and rattly, and the sound gets really bad when the RPMs dip low into the 500 range. Thanks
Thank you very much for this vedio. My car started this Morning and drove for 10-20 minutes. I felt different noise. When I came in front of my garage it stopped. Tried to jump start but it started and died immediately. Took to AutoZone and changed battery . Started car but it will start but dies immediately. Checked alternator and replaced new. Started car but it will stop minute I remove foot from gas. Mechanic told to drive around and it will rest up. He told me if it did not work may have to reset with machine. I drove home with 3-4 stop . I found this vedio and did exactly and idle was reset to 500 rpm. Now it starts.
thx buddy worked on my 4runner 2004. Cant put in drive as brake cylinder is failing but after a battery jump start rough idle kicked in and made check engine turn on. Disconnected battery for 10 min for ECU to reset, did the trick twice, put handbrake and just revved above 700rpm por approx 5 minutes like real life conditions. Idle settled at 600rpm and no more check engine. Time to fix brake now.
Definitely works for second I thought it wasn’t gonna the first time it did nothing but the second time soon as it got warm it worked thx
Aloha from hawaii bless you bro !!!!! work perfect
Thanks bro. Worked on my 2015 Tacoma
Yep! 2000 Tundra. Thanks!
Hello, does the car have to be running to do this or just in the ON position. My 1999 RX300 doesn’t want to idle and keeps stalling out. Please let me know. Thank you!
It worked for 2008 Toyota 4 Runner ! Thank you so much !!!
Wow my car is much quieter now. Great 👍
Works perfectly. Thank you.
Didn’t work on our’97 4Runner but hey it was worth a try. Thanks anyway for sharing the info though.
That was AMAZING!!!
Thank you Brody Bro 😎 👍🏼👍🏼
Thank you sir. You are perfect and I solved my problem as per your instructions. Best regards!
Thanks, Really appreciate you taking time and helping others worked instantly on my vitz 2013
Wow. Seems to have worked on my hybrid. Just did the same sequence and waited for the engine to start itself again, about eight minutes like you said. Thank you.
Used this technique twice in 2 years.
It works.
Question
Replace the battery 2004 highlander works good but when I press the gas pedal hard it stops working I have to turn off the car and press the pedal slowly for it to work.
What can I do?
I already did what the video says
I have a Toyota belta 2005 with keyless ignition and an automatic gearbox, tried this method but unfortunately, it did not work for me. will try it again and post if i have any success tks
Well, my son's 2005 Corolla had been revving a little bit high and could not fix it by cleaning chokes, replacing O2 sensor etc. I should have known this before trying things that did not work. Thank you very much!
Did you guys fix the problems??
Thank you so much just changed alternator idea was scarry low just rest in starbucks drive thru lol life saver
My friends ac works great but stops blowing cold
at idle. I hear that 600 to 1000 rpm is right, but his
won't come back on till its above 1000, I think
1100 or 1200 rpm. Ideas? Air control valve? Or Reset
as in this video? 2002 Highlander. Thanks....
I had my battery/alternator replaced and needless to say the revs were waaaaay down. Followed these instructions and the revs climbed within seconds to a smoother level. Thank you very much. :)
Do you keep your foot off the brake ?
This work perfectly thank you very much.i have yaris 2003 auto car.its work.fine now.
Does it work for 2014 toyota sienna
Omg thanks I was about to take it to a mechanic, wooow it really worked on my 2008 tacoma, I had just replaced the battery notice the rpm when really low, this fix the problm thanks alot.