I remember stumbling on this channel and while back and was taken away of the production and the high level of the presenter. Well this morning I did it again, stumbled into it on a subject I was researching, and was blown away of the presentation.. This channel needs to be picked up by the algorithm cause it might actually be the best one in it's niche.
It looks like you made a really practical video for a small 4090 PC. I'm a Mac person, so as you point out, I'm used to tiny, very quiet and cool running, low power mini-desktop Macs. But, this looks like a fun build for me to add a PC to my options.
I have a massive Lancool III build. There is a lot of wasted space when compared to this.. maybe when the 7800x3d drops I'll rebuild into this case, I'm sure my msi 4080 would fit in here!
Cool build. I would look into Silverstone Air Slimmer 120 for the bottom fans. You can also just straight up fit a Arctic P12 Max on the right bottom intake.
I got this case. I was able to fit the xfx merc 7900 xtx at the bottoms. While it was a bit of a struggle, I have a 4k beast on ultra settings.. in a small case. I love it. I will have to do some modding on it to make it a bit cooler because I used a 1000w sfxL psu so it took some space from the top so I only have 1 fan on top.
@@thatonegamer2709 it gets steamy in my room but the cpu temp goes to 76 and if I remember correctly my GPU never hits 80... And that's just on high load. For the most part in none demanding games it stays cool enough where I'm know my parts are not at risk.
I really want to build a RTX 4080 Gainward Phantom & CPU 7950x3D with this case! Finally I found this vid which shows how a long GPU's can fit, now only the temps if would be right.
The NR200 sent me down a rabbit hole of SFF builds. Im on my 10th sff case in the last 3 years. Going smaller and smaller. I'm currently on Dan A4. Great vid and great build.
ha.. actuallly have the very same components (except CPU, that's an i7 13700k) waiting for the NR200P Max to arrive tommorow. Oh and my RTX4090 is only 336mm (MSI SUPRIM) so good to know it wil fit 😎. Already did an NR200P Max build last year and love the case. No better ITX option with built in AIO watercooling out there.
@Specter - what third party power adapter did you use? I just ordered the same components but I could not find any info on the power adapter you mentioned.
I have this case coming this weekend, and plan to use it with a 4080, did the power supply come with enough PCIE cables to install your card, or did you use extra? Thank you for your time.
@@KostasEleni-lx5lt mine will deliver in a few hours So I’ll have to let you know once I start building it Haha Wish it delivered yesterday /: but today it is!
How is this case going for you with the 4080? Im struggling to decide between 3 cases and coolmaster is sorta at the top of the 3. Im going to go with cpu liquid cooling.
I'm actually currently waiting on a few parts but I'm down sizing from an 011 mini custom loop to the NR200. My plan is to keep my 3950X but upgrade my 5700XT to a 3090 slap a water block on it & do the most insane dual pump / dual rad build I can. The kicker is figuring out how to get the T30 fans to fit LOL
I built something similar for taking with on work road trips... I've got a 4090 in my main gaming desktop, I wanted to put one in this, but nearly every trip the machine sits in parking lots in my car... I got a 3080 for Luke a hundred bucks, so if it gets stolen it's less of a loss
THis is gorgeous mate. I love what you've built there. I'm incredibly surprised by your thermals. I have an SFF build in a Meshlicious case and my RTX 3080 still pushes between 75-80C even when I've undervolted it. Any tips?
Thank you! Thermals were a bit of a challenge to tweak up at the start. The 13600K was hitting the low 90C range with prolonged Cinebench tests, without a proper BIOS adjustment. How's your ambient room temp? Also tweaking a custom fan config, or repositioning the fans with AIO as exhaust. The GPU placement might also be an area that can be adjusted.
Yes, go watch Optimum Tech. He does SFF builds all the time. He also highly recommends the 200P Max and he's even done a build with the DAN case and the 4090 FE in it.
Nice vid bro! I own 3 mini itx systems. Which 2 of them is the original NR200P and 1 is into the new Fractal Design Ridge case. You've got you a new sub. I'm very curious to see more (mini) build video's.
I have the exact same build but with a MSI 4090 suprim. My 13600K reaching 100 C constantly, will try to filp the bottom noctua fans from intake to exhaust and see would it be better. Did you encounter any thermal throttling? Thanks and nice video.
Yeh my 13600k would thermal throttle on cinebench immediately and was drawing 230w+. I have an MSI Z790, and I went into BIOS and changed the “Lite Load” to a lower mode and my temps and power draw dropped down immediately, without noticing any performance drop in gaming and such. So pretty much you need to undervolt it. With MSI it’s easy in the bios, but not sure with other brand mobo’s.
Dealt with the same thermal issue at the start. The MSI motherboards have an easy fix by adjusting the CPU Config - Lite Load. The ASUS boards you have to manually undervolt & adjust the (CPU load-line calibration - Adaptive Boost, etc). A bit of some tweaking and you'll drastically reduce max temps + maintain performance.
@@spectertech I loved your video and it has inspired me to make the same exact build. Can you maybe link me to a video or briefly explain how I would be able to do the same when it comes to undervolting the cpu on the ASUS mobo as I have never done this before and I'm scared to do anything wrong. Thank you so much for this video!!
According to MSI web , the height is 77mm and the NR200P Max official said that is maximum is 75mm , may I know is it there are some clearance the official didn’t told ? Also I am thinking about is it possible to put a suprime classic 4090 inside
NR200P Max = 340€ at the moment ... If you go with a BeQuiet! Silent Loop 2 for 130€ and a Corsair SF-750 PSU for 160€ - you would have 50€ left for a case. So ... sad that it is outdated (no USB-C Frontpanel), but it is still a bang for the buck :) But if you spend another 50€ on it, you can get your own components AND a COLORED Version of the NR200 MasterBox :)
Hey mate. this is a really super build. Been thinking to build a new PC with similar specs. Just one question though, some people says the 4090 card cant fit in the NR200P. Or is it just specifically to MSi cards that fit? thanks
Hi, I'm going to be using the same gpu in this build along with a Ryzen 9 7950x. Can you tell me what cable mod you mentioned you used in order to get the gpu to fit please.
I've been looking for a video like this since I also have the NR200P Max. Its hard to find any videos or Mini ITX cases that can fit 3rd party RTX 4090's and the 336mm and under 4090's are either with AIO's or hard to find European models you don't see here in the states that much. All the other videos are with the extremely rare RTX 4090 Founders edtion which isn't any help.
For using this case but in an AMD build, which cpu/ graphics card combo would be best right now? 7950x3d with a 7900xt? 7800x3d with a 6959xt? Also I am having a very hard time picking the best motherboard so I would appreciate any help.
@Specter - could you please tell me the order of the pins you connected on top of the motherboard? (e.g. CPU connector, system fans, additional at bottom of the case)? My component arrive tomorrow and I want to make sure I set them up right. thanks in advance !
What about vibration? pretty sure if you have this sitting on your desk, right next to your monitor, makes the whole desk vibrate like crazy, why reviewers never mention this!?
Hey mate, love the build. Really love having super powerful PC’s in small discreet packages. Liked and subbed 👍. Also what length 12VHPWR PSU adaptor cable did you go for? I’m planning ahead myself for a build and don’t want to go too short or too long.
@@ahmedal3341 I did a bit of googling and another person said they got a 30cm cable and it was perfect. So I ordered a 30cm one from Moddiy. I’ll let ya know how it fits when I get it.
There's a ton of options to build out in this case. It just really depends on the budget you have and what direction you want to go with. I'd still recommend a 13600K/KF for a build like this easily.
Hi Specter, I am building something a bit similar but with an AMD CPU and an RTX4080, I wanted to ask your recomendation for the GPU powercables. I am not sure if bending them to the side or behind the card is better, help?
Hi! I am planning on building a pc using nr200p max case. I have noticed that new rtx 4000 series cards are using 3 or even 4 separate 8 pin PCIE cables. If I am not mistaken, the case comes with only 2. As I am a begginer in PC world, could you please explain me how it works and how can I safely install rtx 4080 in this case ?
Great video: what'd you do for GPU power? My NR200P max only has two PCIE cables for graphics and I cannot locate a store besides a custom Cablemods to get a 12vhpwr and I don't think I can use any PCIE cable.
@@DanielSouzaMiranda So I ended up plugging in the two PCIE cables each with two ends into a four pin adapter and my 4090 works just fine (I needed the adapter because the one that came with my cart was too large). I did order a a custom three-pin cable, but that is mostly because my current solution requires my front panel to be off for all the wiring. Good luck.
Did the same build with 13700k and 4090 fe .. Thermals are fine, but I'm getting some weird noise from the GPU 🤔🤷♂️ Doesn't sound like standard coil whine and I used in my previous ATX build without any major problems 😔
I was looking for this! I got the same issue idk whats going on with my GPU, ive tried multiple methods and still sounds weirds whenever i use it to switch ppt slides in full screen and games. Have you fixed it already? I got an RTX 3070 ti ASUS ROG.
how can you get those temps? i run on 13700k. while doing cinebench it throttled. i repaster it with nt-h2 dan installed thermalright cpu frame but it still it lowers a bit only
Hi , My v850 sfx that comes with the Case has terrible, very loud buzzing when the systems draws about 200-350 Watts . Support told me thats normal behavior. Im kinda dissapointed with the psu so far .
Thanks for the full exhaust profile tip. It happens to be same for the meshroom D with air cooling. Were you are able to test noise at some point? was it too loud? I saw from Christopher Flannigan those slim fans were noisy as intake and temps turned out to be better without them (as intake), not sure exhaust? th-cam.com/video/3Wo-ceEIh6A/w-d-xo.html Also, you may be able to squeeze regular length fans based on reviews like this one: th-cam.com/video/8XubuoGa6TA/w-d-xo.html
I dont l;ike the ram choice or price. Im glad I stayed away from ddr5 this round. only being able to have 2 functional dimm slots and using slow timings for a crap load of money is not my ideal of fun. I will wait a gen or two when ram, cpu and motherboards get more efficient and play nice together and with windows 12 or whatever MS want to call it then. take care. Not as bad with intel, "supposedly"?
Definitely good value in Australia right now. I just picked one up for $520 ($358 USD). And for all parts separately, $149 Case, $239 PSU, $150 AIO and about $90 PCIE Riser. So I saved almost 100 dollarydoo’s.
Ugly case. That top grille is a dust magnet, and even one drop of water gets near it, it's going to destroy the PC. They could have easily put a removable metal shroud over the top of the grille to make it safer and less visible, without even affecting airflow, because that grille alone is already limiting airflow. There's also clearly room to reduce the height of the case by at least 3-5 inches, which is important, because a tall tiny case is just asking to be knocked over accidentally. Node 304 is basically everything this case isn't.
I just recently received this case as a gift and I’m glad I found this video. The noctua fan advice at the bottom is great
That's a sweet gift!
I remember stumbling on this channel and while back and was taken away of the production and the high level of the presenter. Well this morning I did it again, stumbled into it on a subject I was researching, and was blown away of the presentation.. This channel needs to be picked up by the algorithm cause it might actually be the best one in it's niche.
Welcome back! Thanks for commenting, really appreciate it! ❤️🙏
It looks like you made a really practical video for a small 4090 PC. I'm a Mac person, so as you point out, I'm used to tiny, very quiet and cool running, low power mini-desktop Macs. But, this looks like a fun build for me to add a PC to my options.
Nice! You nailed it. It's an absolute blast to build a PC like this, especially when you're coming from a Mac-mini.
4:35 what third party custom power adapter did you use?
I have a massive Lancool III build. There is a lot of wasted space when compared to this.. maybe when the 7800x3d drops I'll rebuild into this case, I'm sure my msi 4080 would fit in here!
Cool build. I would look into Silverstone Air Slimmer 120 for the bottom fans. You can also just straight up fit a Arctic P12 Max on the right bottom intake.
HI Thanks for the Video, I have the same case with a Ryzen 7700 and 16gb of ram, Still Saving for that 4090, so just using the onboard Graphics
That's awesome!
Thanks for the video. Now I know I can pick up a 4080 x trio and know it will fit in this case.
Loved this intro music.
For real! Does it have a name?
Thanks for the build! Went ahead and ordered it myself from your affiliate links 👍
Thanks for watching! Really appreciate it ❤️
Great build
You mentioned a 3rd party flexible power adapter for the gpu. Could you kindly link what you used?
I would also like this linked please?
I got this case. I was able to fit the xfx merc 7900 xtx at the bottoms. While it was a bit of a struggle, I have a 4k beast on ultra settings.. in a small case. I love it. I will have to do some modding on it to make it a bit cooler because I used a 1000w sfxL psu so it took some space from the top so I only have 1 fan on top.
How are your temps? Im very tempted to bhild an sff but thermals are straying me away, 4090 in atx right now
@@thatonegamer2709 it gets steamy in my room but the cpu temp goes to 76 and if I remember correctly my GPU never hits 80... And that's just on high load. For the most part in none demanding games it stays cool enough where I'm know my parts are not at risk.
Awesome video , quality is great , keep up the great work 👏🏻👌🏻👌🏻
Thank you dude!
Nice, clean presentation, pleasing talking style 💖🌟
I really want to build a RTX 4080 Gainward Phantom & CPU 7950x3D with this case! Finally I found this vid which shows how a long GPU's can fit, now only the temps if would be right.
The NR200 sent me down a rabbit hole of SFF builds.
Im on my 10th sff case in the last 3 years. Going smaller and smaller. I'm currently on Dan A4.
Great vid and great build.
Nice! It's a pretty awesome gateway into the portal of SFF.
ha.. actuallly have the very same components (except CPU, that's an i7 13700k) waiting for the NR200P Max to arrive tommorow. Oh and my RTX4090 is only 336mm (MSI SUPRIM) so good to know it wil fit 😎. Already did an NR200P Max build last year and love the case. No better ITX option with built in AIO watercooling out there.
@Specter - what third party power adapter did you use?
I just ordered the same components but I could not find any info on the power adapter you mentioned.
Great video! Can you share the 3rd party power adapter for 4090?
Fr i need to know that, im going to bulild this
If you know what the cable is and where to buy it please tell me. Im going to build this
Thanks for the good advice for the bottom fans! But, what direction do the top fans do under manufacture? Exhaust or intake? Can you modify this?
Love it! Think im gonna make the same setup! 😁
Btw did u made or planned to upload a step by step guide Video for this setup?
Awesome! Definitely going to work on another Step-by-step SFF build soon.
I have this case coming this weekend, and plan to use it with a 4080, did the power supply come with enough PCIE cables to install your card, or did you use extra? Thank you for your time.
@dariszn2378 - I just ordered the same system. Did the power cables work or did you need some sort of special power adapter for the 4090 ? thanks !
@@KostasEleni-lx5lt mine will deliver in a few hours
So I’ll have to let you know once I start building it Haha
Wish it delivered yesterday /: but today it is!
@@dariszn2378 any luck so far with the build?
I used an adapter from Moddiy - ATX 3.0 PCIe 5.0 Triple 8 Pin to 12VHPWR with a length of 20cm
How is this case going for you with the 4080? Im struggling to decide between 3 cases and coolmaster is sorta at the top of the 3. Im going to go with cpu liquid cooling.
Great build! I have the same and would kike to know how did you undervolted the CPU on B760i, thanks in advance!
I'm actually currently waiting on a few parts but I'm down sizing from an 011 mini custom loop to the NR200. My plan is to keep my 3950X but upgrade my 5700XT to a 3090 slap a water block on it & do the most insane dual pump / dual rad build I can. The kicker is figuring out how to get the T30 fans to fit LOL
Did the fans ever fit?
Bro!!! i finnaly found a 4090 video. I'm trying to upgrade from my 1080 ti to 4090!!! same nr200p im using
I built something similar for taking with on work road trips... I've got a 4090 in my main gaming desktop, I wanted to put one in this, but nearly every trip the machine sits in parking lots in my car... I got a 3080 for Luke a hundred bucks, so if it gets stolen it's less of a loss
THis is gorgeous mate. I love what you've built there. I'm incredibly surprised by your thermals. I have an SFF build in a Meshlicious case and my RTX 3080 still pushes between 75-80C even when I've undervolted it. Any tips?
Thank you! Thermals were a bit of a challenge to tweak up at the start. The 13600K was hitting the low 90C range with prolonged Cinebench tests, without a proper BIOS adjustment. How's your ambient room temp? Also tweaking a custom fan config, or repositioning the fans with AIO as exhaust. The GPU placement might also be an area that can be adjusted.
My gf has that case with 3080 and all she did was add a 120mm fan at the bottom of the case and undervolting and now she gets about 60 to 70c
Would the 4090FE fits on this case? sweet build btw.
Yes, go watch Optimum Tech. He does SFF builds all the time. He also highly recommends the 200P Max and he's even done a build with the DAN case and the 4090 FE in it.
@@ZodiakSL He went a size smaller now! In the Formd T1
Nice vid bro! I own 3 mini itx systems. Which 2 of them is the original NR200P and 1 is into the new Fractal Design Ridge case. You've got you a new sub. I'm very curious to see more (mini) build video's.
Thanks dude! Definitely going to work on more Mini Build videos soon 🤓
Can you share a screenshot of your fancurve and maybe go a bit into detail about the undervolt on the cpu? thanks :)
looking to downsize from my O11 Dynamic and the NR200P is the top contender right now. Really shocked it can fit my 3090 FTW3 utlra as well
I got the Nr200p Max an it looks so gorgeous with an asus rog strix gpu.
Nice setup! That ASUS ROG Strix looks slick
@@spectertech thx
Thanks for the guide! very informative and helpful
Glad it was helpful! Thanks for watching :)
So close.... 5800x3d would have been awesome for this build
I have the exact same build but with a MSI 4090 suprim. My 13600K reaching 100 C constantly, will try to filp the bottom noctua fans from intake to exhaust and see would it be better.
Did you encounter any thermal throttling?
Thanks and nice video.
Yeh my 13600k would thermal throttle on cinebench immediately and was drawing 230w+.
I have an MSI Z790, and I went into BIOS and changed the “Lite Load” to a lower mode and my temps and power draw dropped down immediately, without noticing any performance drop in gaming and such.
So pretty much you need to undervolt it. With MSI it’s easy in the bios, but not sure with other brand mobo’s.
Dealt with the same thermal issue at the start. The MSI motherboards have an easy fix by adjusting the CPU Config - Lite Load. The ASUS boards you have to manually undervolt & adjust the (CPU load-line calibration - Adaptive Boost, etc). A bit of some tweaking and you'll drastically reduce max temps + maintain performance.
@@spectertech Thanks bro I am using the AsRock Z690M ITX, will try it out to see how to get better result.
@@spectertech I loved your video and it has inspired me to make the same exact build. Can you maybe link me to a video or briefly explain how I would be able to do the same when it comes to undervolting the cpu on the ASUS mobo as I have never done this before and I'm scared to do anything wrong. Thank you so much for this video!!
I actually have this same setup albeit with an undervolted 7950X-3D instead. Would you mind sharing your fan profiles? Thanks
It's nice but wouldn't fit my humongous 337 mm length 4090, so I'm going for the Meshroom.
Omg, you're using 337 mm though... I'm gonna consider this.
My Gigabyte 7900XTX is 331MM or a little over 13inches. and its right up against the front panel.
According to MSI web , the height is 77mm and the NR200P Max official said that is maximum is 75mm , may I know is it there are some clearance the official didn’t told ? Also I am thinking about is it possible to put a suprime classic 4090 inside
Great work
thanks for watching!
What power adapter did you run for the 4090. I just bought a nr200p max too so any info would be great!!!!
I'm using the Moddiy - ATX 3.0 PCIe 5.0 Triple 8 Pin to 12VHPWR (20cm). Good luck on your build!
@@spectertechdo you have a link for this? Building mine as well :)
NR200P Max = 340€ at the moment ...
If you go with a BeQuiet! Silent Loop 2 for 130€ and a Corsair SF-750 PSU for 160€ - you would have 50€ left for a case. So ... sad that it is outdated (no USB-C Frontpanel), but it is still a bang for the buck :) But if you spend another 50€ on it, you can get your own components AND a COLORED Version of the NR200 MasterBox :)
Hey mate. this is a really super build. Been thinking to build a new PC with similar specs. Just one question though, some people says the 4090 card cant fit in the NR200P. Or is it just specifically to MSi cards that fit? thanks
There's a few 4090s that can fit within the NR200P Max. I'd just check with the specific model you're trying to use just to be sure!
Hi, I'm going to be using the same gpu in this build along with a Ryzen 9 7950x. Can you tell me what cable mod you mentioned you used in order to get the gpu to fit please.
Sure! It's the Moddiy - ATX 3.0 PCIe 5.0 Triple 8 Pin to 12VHPWR (20cm)
I've been looking for a video like this since I also have the NR200P Max. Its hard to find any videos or Mini ITX cases that can fit 3rd party RTX 4090's and the 336mm and under 4090's are either with AIO's or hard to find European models you don't see here in the states that much. All the other videos are with the extremely rare RTX 4090 Founders edtion which isn't any help.
Reel ‘Em Inn!!
🎣
How did you manage to OC / undervolt with a B board?
Base clock altering
You mean a Shaq sized shoebox.
For using this case but in an AMD build, which cpu/ graphics card combo would be best right now? 7950x3d with a 7900xt? 7800x3d with a 6959xt? Also I am having a very hard time picking the best motherboard so I would appreciate any help.
@Specter - could you please tell me the order of the pins you connected on top of the motherboard? (e.g. CPU connector, system fans, additional at bottom of the case)? My component arrive tomorrow and I want to make sure I set them up right. thanks in advance !
What about vibration? pretty sure if you have this sitting on your desk, right next to your monitor, makes the whole desk vibrate like crazy, why reviewers never mention this!?
Nope. None at all
What size fans did you use at the bottom of the case? Are those 140mm?
in this case fits a Radeon RX 7800 XT from XFX QICK or MERC 319?
Hey mate, love the build. Really love having super powerful PC’s in small discreet packages. Liked and subbed 👍. Also what length 12VHPWR PSU adaptor cable did you go for? I’m planning ahead myself for a build and don’t want to go too short or too long.
+1 for the cable length. Would love to know that as well before committing to the purchase :-)
@@ahmedal3341 I did a bit of googling and another person said they got a 30cm cable and it was perfect. So I ordered a 30cm one from Moddiy. I’ll let ya know how it fits when I get it.
20cm seems to be a pretty good sweet spot!
@@spectertech Looking forward to a build like this. Can you please link the store where you got the custom gpu cable from? Thanks!
Would also like to know!
bit late to the party but sence you posted this would you change your cpu choice at all or is cpu choice up to the user?
There's a ton of options to build out in this case. It just really depends on the budget you have and what direction you want to go with. I'd still recommend a 13600K/KF for a build like this easily.
Hi Specter, I am building something a bit similar but with an AMD CPU and an RTX4080, I wanted to ask your recomendation for the GPU powercables. I am not sure if bending them to the side or behind the card is better, help?
Hi! I am planning on building a pc using nr200p max case. I have noticed that new rtx 4000 series cards are using 3 or even 4 separate 8 pin PCIE cables. If I am not mistaken, the case comes with only 2. As I am a begginer in PC world, could you please explain me how it works and how can I safely install rtx 4080 in this case ?
Is it safe to game at 4k in this? Would temps be very high?
Great video: what'd you do for GPU power? My NR200P max only has two PCIE cables for graphics and I cannot locate a store besides a custom Cablemods to get a 12vhpwr and I don't think I can use any PCIE cable.
Same problem. Want to buy 12VHPWR ADAPTER CABLE but EUR store are in process of product uploading! Told me support!
@@DanielSouzaMiranda So I ended up plugging in the two PCIE cables each with two ends into a four pin adapter and my 4090 works just fine (I needed the adapter because the one that came with my cart was too large). I did order a a custom three-pin cable, but that is mostly because my current solution requires my front panel to be off for all the wiring. Good luck.
Did the same build with 13700k and 4090 fe .. Thermals are fine, but I'm getting some weird noise from the GPU 🤔🤷♂️
Doesn't sound like standard coil whine and I used in my previous ATX build without any major problems 😔
I was looking for this! I got the same issue idk whats going on with my GPU, ive tried multiple methods and still sounds weirds whenever i use it to switch ppt slides in full screen and games. Have you fixed it already? I got an RTX 3070 ti ASUS ROG.
Planning to build in Meshroom S. Both graphic card and CPU AIO get their own wall for direct outside air.
planning on building this with a 4080 but just figured out the psu only has 2x8Pin Pcie but 3x8pin are needed how did you solve this???
I wonder if suprim x can fit with only 1mm difference
how can you get those temps? i run on 13700k. while doing cinebench it throttled. i repaster it with nt-h2 dan installed thermalright cpu frame but it still it lowers a bit only
what 3rd power cord did you get?
What flexible power adapter did you use
Hey, do i need a third pci-E cable for a rtx 4080 ? As far as i know this case comes only with 2 cables
What gpu power cable did you use?
How where you able to under volt it I thought b series did not support it
Anyone ever find out what the customer power adapter was? Dying to build this with a windforce v2 but worried about the power adapter fitting now
Hi ,
My v850 sfx that comes with the Case has terrible, very loud buzzing
when the systems draws about 200-350 Watts . Support told me thats normal behavior. Im kinda dissapointed with the psu so far .
With negative pressure you’re going to collect lots of dust!
Thanks for the full exhaust profile tip. It happens to be same for the meshroom D with air cooling. Were you are able to test noise at some point? was it too loud? I saw from Christopher Flannigan those slim fans were noisy as intake and temps turned out to be better without them (as intake), not sure exhaust? th-cam.com/video/3Wo-ceEIh6A/w-d-xo.html
Also, you may be able to squeeze regular length fans based on reviews like this one: th-cam.com/video/8XubuoGa6TA/w-d-xo.html
bro,,if gpu size 338mm can fit it,,??
Anyone know if the 4070ti strix will fit in this case? About the same length as the msi gsming trio x 4090
"i went with a more economic option" proceeds to build with a cpu that draws 230W under full load, yeah very economic there.
Current nr200 max prices do not make sense imo.
It's a hefty increase over retail. If you can snipe one at the original price , it's solid.
I dont l;ike the ram choice or price. Im glad I stayed away from ddr5 this round. only being able to have 2 functional dimm slots and using slow timings for a crap load of money is not my ideal of fun. I will wait a gen or two when ram, cpu and motherboards get more efficient and play nice together and with windows 12 or whatever MS want to call it then. take care. Not as bad with intel, "supposedly"?
I love it but 450$ for a case.
Its not just a case though is it, I mean you get a 280 AIO + a 850W + a GPU Riser all included
@@yoitsmefror you can buy the non max version and save $100 by buying them separately. Seems pointless to me.
Definitely good value in Australia right now. I just picked one up for $520 ($358 USD). And for all parts separately, $149 Case, $239 PSU, $150 AIO and about $90 PCIE Riser. So I saved almost 100 dollarydoo’s.
Price in Poland 300zł~ (80$)??? for used NR200P
@@UnboundClown that's a good price then. It's just overpriced in North America.
Idc how good a case looks 450$ lmao ripoff
Ugly case. That top grille is a dust magnet, and even one drop of water gets near it, it's going to destroy the PC. They could have easily put a removable metal shroud over the top of the grille to make it safer and less visible, without even affecting airflow, because that grille alone is already limiting airflow. There's also clearly room to reduce the height of the case by at least 3-5 inches, which is important, because a tall tiny case is just asking to be knocked over accidentally. Node 304 is basically everything this case isn't.
cry