Good idea, even though it's a temporary setup, maybe a few weeks max, I tried to make the cable management decent so I wouldn't snag them. I'll add it the Episode 6. Thanks for watching!
I subscribed! I am considering purchasing the F-16EX Viper Throttle you have shown. I just have the Thrustmaster Hotas Warthog at moment. It would just be fun to try a different throttle. Great setup!
Thank you, Thank you! I can't say it enough. Thanks for watching and subscribing! If you're a Viper fan it's a no brainer, the detents and the manipulation of the throttle going from off, to idle, afterburner is very satisfying. When I used the warthog throttle, I always ran out of fuel because I didn't have detents installed.
I have a setup for all the Red Air, because they have similar controls. Episode 6 will be the F-15C. If I get enough interest I will do the Migs. I have all the Modules, but I don't want to bore everyone with simular setups. Thanks for watching!
Thank you, I'm in the process of making a quick F16C setup update video. Here's my Updated F/A-18C setup. th-cam.com/video/SOD6J4Up7qE/w-d-xo.htmlsi=i_xMjuNVWsNU2oFt I have different setups for certain aircraft including helos! th-cam.com/play/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g.html&si=4IEQogUYD_pvMlv9 If you have any questions, please ask! Thanks for watching!
@@KarmasGhosts Thanks for the reply! I'll have a look at the new vid. But, your throttle sits basically in the middle of the plate. Did you have to bore new holes to fix it there?
@@skarbimirprokopek6512 It's 80% on the plate. No, I used industrial velcro. I have multiple onion 2s and warthog throttles that I swap between aircraft.
I don't have a video of my PC setup. But here's a link to a video with my updated PC setup in the description. th-cam.com/video/V0gLM53gS64/w-d-xo.html Thank you for stopping by. If you have any more questions, please ask.
Tekcreations panels are functional. The fit and finish can use improvement for how much they cost. The electronics/PCB look top notch, but the mechanics seems like DIY quality. The companies creating panels are small, so they can charge the premium price. I have been finding that I use the Tekcreations panels until someone makes a better one. For the ICP went from Tekcreations to simgears and their F18 UFC to WinWings'. Thanks for watching!
Thank you for watching! Please check out my other aircraft specific setups. th-cam.com/play/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g.html&si=ANoqWoFnxXCfW-1o
Thank you! If you're interested in cockpit setups other than the F-16C, please check out my other setups! th-cam.com/play/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g.html&si=UxhTGUx9qGMOf0Vz
Thank you! I appreciate you taking the time to watch! I have other specific aircraft setups on my channel if you're interested. Here's the link : th-cam.com/play/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g.html&si=3LuoZ1qKpv6zGXH5
In VR all you have to do is look around, just like in real life except you have limited field of view. The control column/joystick is located on the right side of the pilot in the F-16, it's not a center stick. Thanks for watching!
8020, 1010, 10 Series 1 Inch x 1 Inch T-Slotted Aluminum Extrusion DIY Extruded Linear Slot Bar Rail 80/20 (36" Long, Smooth, Clear Anodize) I rough cut the aluminum, then milled the ends to make sure the cut was square. Then used 90 degree brackets to attach them to the desk mounts.
I've listed all the companies and components in the video description for all of people that are interested in purchasing this setup! Here's my updated F-16C setup for 2023. th-cam.com/video/V0gLM53gS64/w-d-xo.htmlsi=SivOQ71XxUoaeY8m If you have any other questions, please ask! Thanks for watching!
The take off and combat ready panels can be mounted to the Monstertech Mount using the stock WinWing mounts. I separated them for spacing and used 4040 series M5 T Slot Nuts and M5 x 20 mm and M5 x 10 mm knurled thumbscrews to mount them. If you have anymore questions, feel free to reach out. Thanks for watching!
@@KarmasGhosts Great setup! I just got my PTO2 and am trying to assembe it with the same throttle you have. Did you use a special mounting plate? My Orion 2 sits on a Monstertech table mount but there seems to be far less space than on your setup, my throttle sits much further forward.
@skarbimirprokopek6512 No, I'm just using the Monstertech Warthog plate, but I mounted it underneath of the aluminum extrusion instead of the traditional top. It gave me the room I needed. Here's my Updated F-16C setup that I uploaded last night. It might show it better. th-cam.com/video/V0gLM53gS64/w-d-xo.html Thanks for watching!
If you're interested in this setup, here's the updated F-16C setup. The companies and components are listed in the description. th-cam.com/video/V0gLM53gS64/w-d-xo.htmlsi=sB2Okw87n7UgMHz4 Thanks for watching!
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
"DCS is free to play"
😆....The lies!
Thanks for stopping by!
Free to "play" not free to enjoy lol
You should do a tour of the cable management systems you used. Great setup!
Good idea, even though it's a temporary setup, maybe a few weeks max, I tried to make the cable management decent so I wouldn't snag them. I'll add it the Episode 6. Thanks for watching!
I subscribed! I am considering purchasing the F-16EX Viper Throttle you have shown. I just have the Thrustmaster Hotas Warthog at moment. It would just be fun to try a different throttle. Great setup!
Thank you, Thank you! I can't say it enough. Thanks for watching and subscribing!
If you're a Viper fan it's a no brainer, the detents and the manipulation of the throttle going from off, to idle, afterburner is very satisfying.
When I used the warthog throttle, I always ran out of fuel because I didn't have detents installed.
This is awesome honestly, I wonder how a MiG-21 setup would look possibly.
I have a setup for all the Red Air, because they have similar controls. Episode 6 will be the F-15C. If I get enough interest I will do the Migs. I have all the Modules, but I don't want to bore everyone with simular setups. Thanks for watching!
That has to be one of the cleanest setup's i have ever seen. Just absolutely amazing dude !
Thank you, I'm in the process of making a quick F16C setup update video.
Here's my Updated F/A-18C setup.
th-cam.com/video/SOD6J4Up7qE/w-d-xo.htmlsi=i_xMjuNVWsNU2oFt
I have different setups for certain aircraft including helos!
th-cam.com/play/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g.html&si=4IEQogUYD_pvMlv9
If you have any questions, please ask!
Thanks for watching!
@@KarmasGhosts Thanks for the reply! I'll have a look at the new vid. But, your throttle sits basically in the middle of the plate. Did you have to bore new holes to fix it there?
@@skarbimirprokopek6512 It's 80% on the plate. No, I used industrial velcro. I have multiple onion 2s and warthog throttles that I swap between aircraft.
looks very clean and neat. the only thing you need are real screens in the mfd's and a DED
Thank you! DED and screens aren't needed because I fly in VR.
Thanks for watching!
This is pretty cool. You should get winwing’s MFD’s so you can have actual screens to use.
I am getting Winwing's MIPs without the screens because I run DCS in VR.
Thanks for watching!
yo can you link me the setup for your gaming pc. case and type of cooling/fans you have. been trying to do a build with this kind of colorage
I don't have a video of my PC setup.
But here's a link to a video with my updated PC setup in the description.
th-cam.com/video/V0gLM53gS64/w-d-xo.html
Thank you for stopping by.
If you have any more questions, please ask.
How do you find the Tek Creations panel? Considering left/right side for F16.
Tekcreations panels are functional. The fit and finish can use improvement for how much they cost. The electronics/PCB look top notch, but the mechanics seems like DIY quality.
The companies creating panels are small, so they can charge the premium price.
I have been finding that I use the Tekcreations panels until someone makes a better one. For the ICP went from Tekcreations to simgears and their F18 UFC to WinWings'.
Thanks for watching!
Awesome setup
Thank you for watching! Please check out my other aircraft specific setups.
th-cam.com/play/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g.html&si=ANoqWoFnxXCfW-1o
Amazing!
Thank you!
If you're interested in cockpit setups other than the F-16C, please check out my other setups!
th-cam.com/play/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g.html&si=UxhTGUx9qGMOf0Vz
You should get the real simulator f16 base. Worth it!
Yes, I've been eyeing their grip and base. Looks like a good piece of kit.
Nice rig.
Thank you!
I appreciate you taking the time to watch!
I have other specific aircraft setups on my channel if you're interested.
Here's the link :
th-cam.com/play/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g.html&si=3LuoZ1qKpv6zGXH5
Sick sim pit
Thank you!
how do you get to the right panel of buttons next to the joystick?
I just reach through. Thanks for stopping by!
@@KarmasGhosts no, thank you for posting this, looks really good by the way.
How do you look around? A joystick?
In VR all you have to do is look around, just like in real life except you have limited field of view. The control column/joystick is located on the right side of the pilot in the F-16, it's not a center stick.
Thanks for watching!
What did you use to mount the mfds on the foxx and monstertech mount ?
8020, 1010, 10 Series 1 Inch x 1 Inch T-Slotted Aluminum Extrusion DIY Extruded Linear Slot Bar Rail 80/20 (36" Long, Smooth, Clear Anodize)
I rough cut the aluminum, then milled the ends to make sure the cut was square. Then used 90 degree brackets to attach them to the desk mounts.
How much u paid for all of these?
I want to get this setup too
I've listed all the companies and components in the video description for all of people that are interested in purchasing this setup!
Here's my updated F-16C setup for 2023.
th-cam.com/video/V0gLM53gS64/w-d-xo.htmlsi=SivOQ71XxUoaeY8m
If you have any other questions, please ask!
Thanks for watching!
@@KarmasGhosts thanks ^^
How did you mount winwing panels
The take off and combat ready panels can be mounted to the Monstertech Mount using the stock WinWing mounts. I separated them for spacing and used 4040 series M5 T Slot Nuts and M5 x 20 mm and M5 x 10 mm knurled thumbscrews to mount them. If you have anymore questions, feel free to reach out. Thanks for watching!
@@KarmasGhosts Great setup! I just got my PTO2 and am trying to assembe it with the same throttle you have. Did you use a special mounting plate? My Orion 2 sits on a Monstertech table mount but there seems to be far less space than on your setup, my throttle sits much further forward.
@skarbimirprokopek6512 No, I'm just using the Monstertech Warthog plate, but I mounted it underneath of the aluminum extrusion instead of the traditional top. It gave me the room I needed.
Here's my Updated F-16C setup that I uploaded last night. It might show it better.
th-cam.com/video/V0gLM53gS64/w-d-xo.html
Thanks for watching!
how much did it cost ?
If you're interested in this setup, here's the updated F-16C setup. The companies and components are listed in the description.
th-cam.com/video/V0gLM53gS64/w-d-xo.htmlsi=sB2Okw87n7UgMHz4
Thanks for watching!
Free game are the most expensive
Isn't that the truth!
Thanks for stopping by!
jst get a vr headset
I do, That's why I like have a full cockpits for different aircraft. So it matches as much as possible with what I see in VR.
Literally just serve at this point
Lol, I'm retired Navy! 23 years service. Been there done that! Thanks for watching!
@@KarmasGhosts That adds up
Wouldn't it be cheaper buying a real jet?
Image if they were?! Thanks for stopping by!
Bro why you got so much money save some for us dawg
😆 Thanks for stopping by!
average dcs moment
Thanks for watching!
Touch grass NOW!
😆