Everything going green, the only Solar TH-camr that spits fact Theoretically & practically, very knowledgeable ,sound & eloquent with Top notch video presentations........ 👍
As a renewable energy engineer, I must say you are doing well. Keep up with the good work. However, I think you do well to let viewers know the load capacity, of course the must is a 10kva inverter, then show round, the appliances, that will give better confidence to intending clients. Your professionalism is top notch. God bless you always.
Nice work. I think it is best to connect the positive and negative cables diagonally. So common positive of the first parallel set. Connect positive to battery A and negative to Battery B. That way the charge and discharge is even across the 2 batteries and one battery is not over loaded.. it would also reduce soc drifting which is a thing that can happen with unbalanced parallel connection.
@@GTdontDOthat not true. Lithium tend to have flat voltage curve which is why it doesn't, can't balance itself. You want to avoid voltage drop when you do parallel battery connection and the way to do that is to ensure all battery in a parallel connect get equal charge and discharge. This is why in a 2 battery system like this, the P cable should be connected to battery 1 and negative connected to battery 2 this way the charge runs across both batteries equally.
You hit the point bro. Even blue carbon brand i use usually draw a schematic parallel diagram to that effect . So its best to connect from the first and last battery to equalize charging and discharge irrespective of the number of batteries.
Please Sir can help us do a video load analysis. How to come up with the number of batteries, the inverter rating panels, charge Controller and battery.
Nice work, but wouldn't it be better if the negative or positive (whichever you choose) that is connected to the busbar be taken from the other battery you paralleled. Like since you paralleled all four batteries in twos, its better to take the positive from the battery at the top to the busbar and then the negative from the battery at the bottom to the busbar. Do the same for yhe other batteries you paralleled. Thus method ensures that you'll draw equal power from all batteries at all time.
@@smilinsunsmilinsun8056 while yeah I do understand that, it's just there are a lot of videos, manuals and such that recommend such connection. Even some Felicity lithium battery paralleling diagrams that I've seen in their manuals also recommend such connection. All in all this type of connection still works, I'm just throwing in my two cents 😊
Whenever i see your videos, i suspend anything else and rush into it. Quite enlightening, eloquent and professional. I love what you do bro. Can i have your contact please? Kingsley is my name
Did you run separate strings from the solar panels for each charge controller and then parallel to the busbar? Cos I heard you can series 2 diff brand of charge controllers. How was that connected?
As a renewable energy engineer, I must say you are doing well. Keep up with the good work. However, I think you do well to let viewers know the load capacity, of course the must is a 10kva inverter, then show round, the appliances, that will give better confidence to intending clients. Your professionalism is top notch. God bless you always.
Super
Perfect work
Everything going green, the only Solar TH-camr that spits fact Theoretically & practically, very knowledgeable ,sound & eloquent with Top notch video presentations........ 👍
@@oranusichigozie5219 Wow this accolades is way too much for one man lol Thanks Buddy
As a renewable energy engineer, I must say you are doing well. Keep up with the good work. However, I think you do well to let viewers know the load capacity, of course the must is a 10kva inverter, then show round, the appliances, that will give better confidence to intending clients. Your professionalism is top notch. God bless you always.
Clean work
Nice work. Most enlightening.
@@doziemgbo4796 Thank you
Loud and clear nice job
Thanx from Uganda
@@akurapeter5942 Thanks
Thanks a lot, good work
You are welcome!
good job
Thank you
Nice work. I think it is best to connect the positive and negative cables diagonally. So common positive of the first parallel set. Connect positive to battery A and negative to Battery B. That way the charge and discharge is even across the 2 batteries and one battery is not over loaded.. it would also reduce soc drifting which is a thing that can happen with unbalanced parallel connection.
dat connection with tubular battery .lithium dey balance it self na make am connect am dat way
@@GTdontDOthat not true. Lithium tend to have flat voltage curve which is why it doesn't, can't balance itself. You want to avoid voltage drop when you do parallel battery connection and the way to do that is to ensure all battery in a parallel connect get equal charge and discharge. This is why in a 2 battery system like this, the P cable should be connected to battery 1 and negative connected to battery 2 this way the charge runs across both batteries equally.
You hit the point bro. Even blue carbon brand i use usually draw a schematic parallel diagram to that effect . So its best to connect from the first and last battery to equalize charging and discharge irrespective of the number of batteries.
@@baricdondarion6228 for me i use tubular battery and na d same connection u mention i always dey connect my battery
You are the baba of them all.
There are still many baba's out there who prefer anonymity.
This guy deserves like subscribe and share❤
Nice job
@@linossinkala7840 Gracias
So how many kva setup is this 20,000watts???
Everything Everything 😊😊😊
@@godbasi Going green
The land is truly Green😊
Great work Ikenna.
How do I get my hands on the jinko 24v 5Kwh lithium Battery?
@@godbasi Thank you, 24v version not available
@@smilinsunsmilinsun8056sir how much is the jinko lithium battery 5kwh and what is the brand of the solar panels panels and how much
Great... Hmmmmm.... Do you do training? And where is your location?
How can i no good lithium iron battery?
Please talk about Solar cable and the maximum current that passed through it.
was watching to see the DIP switch setup for the master and slave thing 😭😭
Please Sir can help us do a video load analysis. How to come up with the number of batteries, the inverter rating panels, charge Controller and battery.
Job well done pls mr. Ikenna what's the capacity of the inverter
do we need charging controllers to a hybrid inverter? i thought such inverters have controller already...
@@crispenmushumba8490 You are right, it has a cCharge ontroller already.
Good work Sir, hw can I get ur contact I wish to work with you am a upcoming solar engineer
Please can i get a quotation of 5kva inverter with 15kwh or 17.5kwh battery
🤔
Nice work, but wouldn't it be better if the negative or positive (whichever you choose) that is connected to the busbar be taken from the other battery you paralleled.
Like since you paralleled all four batteries in twos, its better to take the positive from the battery at the top to the busbar and then the negative from the battery at the bottom to the busbar. Do the same for yhe other batteries you paralleled. Thus method ensures that you'll draw equal power from all batteries at all time.
Not Neccessarily that is the function of the BMS and communications cables and system.
@@smilinsunsmilinsun8056 while yeah I do understand that, it's just there are a lot of videos, manuals and such that recommend such connection. Even some Felicity lithium battery paralleling diagrams that I've seen in their manuals also recommend such connection.
All in all this type of connection still works, I'm just throwing in my two cents 😊
All these connections reference SOC drift prevention. But I assure you that SOC drifting is a BMS glitch. Any battery builder will tell you same
Good work Engr Ikenna, pls what brand of panel did install ?
@@Centvinida Jinko
Oga Boss what is your take on the Huawei inverter with their lithium battery that is fanless
Please what do you have to say about Afri Cell Solar Panels...How would you rate them compare to other Solar Panels .
See as you almost rubbish our almighty Felicity controller🤣🤣🤣
Wouldn't it be better to connect the negative cable on the second battery in pararrel set while the postive is on the first
Am waiting for him to reply this
So does that mean the must inverter does not have an inbuilt charge controller
@@richardgongora1142 No this is not hybrid
Whenever i see your videos, i suspend anything else and rush into it. Quite enlightening, eloquent and professional. I love what you do bro.
Can i have your contact please?
Kingsley is my name
@@CitiPowerSolar Many Thanks for your support
At what pv energy rate does 2 units of charge controller come in use and how can I connect the battery to use double controller..??
PV Energy rage not sure I follow
How is the solar panel connected ?
@@LearnWithOlartek 2 in series
Did you run separate strings from the solar panels for each charge controller and then parallel to the busbar? Cos I heard you can series 2 diff brand of charge controllers. How was that connected?
Yes Correct 2 seperate strings was used here
9 on each I guess. Well done my brother.
@@danielteofor4132 10 solar panels One charge charge controller and then 8 on one, Thanks
Sorry, does Jinko have authorized sellers for these batteries here in Nigeria or you imported them in
Batteries are available here
What's the capacity of the inverter pls?
10 KVA maybe
I want to learn something why you put change over and 2 charge controllers
@@linossinkala7840 Not sure I understand what you mean by put charge over
Changeover he meant to say 😂
He said why he used 2 charge controller, watch the video again
Great job. What is the size of the inverter?
The owner have money. I build lithium batteries for living. Those batteries cost about $1500-200 each.
Which do you recommend between Lithium-ion (Li-ion) and LiFePo4 batteries?
Very expository.....
Thanks
You talk too much
@@nnamdi.ohaegbuchi Your lack of patience is the reason you still haven't learnt much.
As a renewable energy engineer, I must say you are doing well. Keep up with the good work. However, I think you do well to let viewers know the load capacity, of course the must is a 10kva inverter, then show round, the appliances, that will give better confidence to intending clients. Your professionalism is top notch. God bless you always.
@@scodevicetech Thanks