i guess Im asking randomly but does any of you know of a method to log back into an instagram account..? I was stupid lost the password. I appreciate any tips you can offer me
Heads-up for those wanting to flash a bricked old X58 motherboard (Gigabyte X58A UDR3 Rev 2.0 here), I had no luck using AsProgrammer1.4.1, but was able to successfully flash my BIOS chip using CH14AProgrammer ver. 1.1.1.3.2.
@@Miyconst No problem. Ironically this was an Aliexpress refurbished board that the seller explicitly stated on the listing "Updated to the latest BIOS for maximum CPU compatibility"... didn't POST or put out any signal at all, tried absolutely everything you could think of... eventually I decided I may as well get a BIOS Flash Programmer tool as a last resort (return period had already passed before I tested the board as it looked very clean and like new) as I suspected the seller did not actually update the BIOS which would prevent my Xeon X5675 from being recognised... and what do you know... as soon as I flashed the BIOS the system worked perfectly haha... I think the lesson to be learnt is do not trust Aliexpress sellers to always be honest.
I bricked my x99 mobo trying to unlock the bios... Bought a ch341a programmer and followed this video, now my mobo works fine again! Thank you very much!
That's clearly best guide for me. My Hp 7200 MT workstation's bios had corrupted. I tried many ways to fix it, but failed. Finally, without desoldering, i followed your guide and made all steps. Your guide brought it back to life:) I appreciated. Thank you so much.
@@MrMalam1234bricked the bios on my gigabyte b450m ds3h while trying to enable secure boot for win 11, because i kept going fast in the bios menu 😂, but i reflashed the bios with the ch341a and everything is perfect 👌
Thanks for your work. It’s easy to see the love that you have for technology, and for sharing it. You are helping a lot of people ^^ I hope it returns double as you give. Have a nice weekend :) and keep doing that you love, you are doing great 🙌✨😁
Most new chinese motherboard come with Winbond 25Q128JVSQ. What program do you use to flash it, because even CH341A 1.40 does not have that bios model listed.
Hi, I have a question. Maxsun b450m challenger is supports Ryzen 7 1700 but , in product page it says it requires different bios for that . But in the official website Ryzen 1000-5000 series requires *B1* bios . I don't if it has the latest bios then I put a Ryzen 7 1700 is that going to work.
Take screenshots of the conversation with the seller and if the motherboard doesn't work with R7 1700 - demand compensation or return the motherboard. I cannot guarantee you anything, it's not me who sells the motherboard and it's not me who writes the description page. 😃
This item is helping me with badly modified bios. I tried to change the logo of Asrock G41M-VS3. Didn't boot afterwards but I flashed it using file from official asrock site. It worked again.
My gigabyte board downloads bios as .fxxd files, and I'm not sure how to extract the binary given your tutorial. the only option the programmer gives me is to "extract image as is" and thats it.
@@Miyconst i have the same issue it says "error connecting CH341(-1)" and there is a yellow light instead of green and it seems to dim when i connect it to the bios CHIP
Good tutorial However, to clear CMOS you just use the jumper as indicated on the motherboard OR you remove the battery but not BOTH. The program FLASHROM can be used from the command line, it does use CH341A as an option Good luck
Maybe not all are fragile like that, but i wonder if you could solder some metal pins on the legs of the chip and use a USB extensor to connect the programmer on the computer then just attach the programer directly on those pins, so you don't need the clip.
@@fluthyer4362 ofcourse directly soldering wires works but that beats the purpose of easy plug and remove purpose of a clip. But im guessing you are correct hbyiu said not all clips are fragile; i think i got a copy of a copy. Bad quality clip 😂
Yes kk, but still you won't need to remove the chip out of the motherboard and then put it back again, i think directly soldering wires is easier and more safe, but i think you can also find branded clips, i just don't know the price or where to find them, but they may be worth the price.
@@fluthyer4362 that is true. Direct soldering gives better contact than these clips. We need to seat the clips properly and even then sometimes while reading they might come off. I havent seen any branded clips till now and they maybe expensive.
I got my X99-TF bricked and with this tutorial I was able to fix it, than you Myconst!!! By the way, is there any place to learn in detail the different versions of the BIOS inside your tool? Having the CH341a here, makes me want to make some test but I would like to know what is the difference between one and another.
Mi899 has a description for every BIOS option. You can launch the app and pick the BIOS you want. Beware: multiple BIOS flash with CH341A may break the BIOS chip or its legs.
Hi Marlon, I have a laptop that is bricked. I need to get a .bin file to use with ch341a. any idea on how to convert .exe file to .bin file for flashing?
You skipped one step, before starting to work with AsProgrammer, need to install CH341A drivers on PC, where u configuring new bios. Thanks for your vid, very helpful!
@@Miyconst Thank you sir. If anyone ever has a bricked bios this will always be the first video I will recommend to people. The instructions are clear and not just for one specific motherboard generation.
bro, awesome tutorial. I have surface pro 3 which is locked at boot level. cannot even go to boot setup as well. right after boot screen it asks for password. is there a way i can flash the bios without opening the surface pro?
Bro I want to reflash the bios on my dell optiplex 9010 (i5 3rd gen) I checked online ....i found a product named USB Programmer CH341A Series 24 EEPROM Writer 25 SPI Flash BIOS Board Module USB to TTL 5V-3.3V And a SOIC8 150mel Socket + SOIC8 Clip Adapter... My question is ...will these things work on my pc....I found SOIC 200mel aswell ....which one to buy... I csn share the website link if you want
Sorry, I can't tell you what is going to work without access to your Dell. Find the BIOS chip on the motherboard, check it's model and physical dimension, then check which programmer can read/write it. Most likely CH341A can do the job for you.
Awesome tutorial mate. I'll have to try it when I get my ch341a. Only on question the ch341a is 3.3v and the datasheet from the eeprom chip says it needs 1.8v so I also ordered a adapter for 1.8v but I don't know how to connect it.
hello, do you have a bios collection for .bin? for my case i'm looking for the .bin file to reset a 8pin bios chip W25Q80DV and 25LB128D pc Lenovo. I would like to remove the password.
i have a gigabyte Z97X-UD7 TH board and when I press the? button all I get is an ID FFFF error I don't see a window popup. please help. (i got full RED LED so the full power is available)
Hey got a Maxsun B650. Not sure which file to write with, in the BIOS folder I have 5 files: 3 EFI files (AfuEfix64, BootIa32, BOOTX64) - each 600KB file size 032 file - 32,000KB file size NSH File - 1KB Any ideas?
Hi! I have one Ausek/Hiniso/Ourlife actioncam AT-S81TR with sx16-1000 rechargable battery (with orange strip at top). I upgraded a wrong "sphost.brn" in this camera, now won't turn on. The previous software/firmware was SBC_V37-01.04.05 --- Can you help me please to unbrick this camera? What uploader for firmware should i use? Anyone the right brn? Pressing the buttons can reset something? How to replace firmware? Windows 10 don't recognise any actioncamera driver at all again. Jtag? Any help or sugestion and backup-file!?... Thanks!
The only way to revive the camera is the hardware firmware flash but I really doubt that you could do it with a CH341a, still you can try to disassemble it and locate the firmware/BIOS chip and check its specs.
@@Miyconst The asian producers of this camera didn't answer for help, neither respond in the official page. First i need a backup rom for this. And some technical data from producers. I'm still waiting...
Hi. I have Problem with writing/programming. I have a Gigabyte ga-z87x-d3h motherboard and BIOS file is Z87XD3H.F9. Power is connected (to mainATX and to ATX(CPU)12V 2x4). XEON processor, Clock battery and ddr3-memory (4pcs) and system fans are connected to mobo, nothing else. I have read both BIOS CHIPS (it is multiBIOS MX25L6473E), reading gone fine and both chips are full of FF(empty). BUT when trying to do anything else with Asprogrammer 2.1.0.13, it did not happen: 1. Erace IC, it starting to do but never end 2. Program IC, starting to do, no progress in bar (red and yellow lights are on) No error messages, but this never ends. Can anyone help me? Problem in machine is that suddenly it sopped working. When pressing power button PSU starts and fans rolling couple of seconds. Then all stops to start again etc... I tried to reset bioses first by short-circuiting those... Thanks for this guide, it is very clear!
hello, i bricked my x99 board bios and now it wont boot, i tried following this video but multiple things happen: 1. at first the program said Error connecting CH341(-1) 2. after removing cpu it said in the console 4 parameters which were all ffff or 0000 so i kept trying and nothing happend 3. the run led on the programmer became yellow and now its yellow even when its not connected any help would be great as i am stuck with a bricked pc because of a stupid mistake i made
Thank you for the video first of all. Since I see likes to post, I'll go ahead and ask: I'm using a NeoProgrammer v2.2.0.10 but so far when I want to open the repaired BIOS Image that someone has done for me, that has access to LBE++ BIOS Extractor (dealing with an HP BIOS here), I get the error message File not open, press ok to ignore & risk data corruption or abort to kill the program. Any ideas why that happens? What going wrong? When I press ok, the cursor on the laptop I'm using (since mine is well the patient not doing so well) just does an infinite loading circle.
Man i really appreciate what you doing. I studying those things and this is really good , short and simple explanation. Much appreciated and good luck to you ❤❤
Anyone try this programmer with a cmos chip called: macronix mx25u12872f? Please, tell me if its compatible. My gigabyte MB get bricked and boot loop. Thanks
Hey mate, thanks for the video, I do have a question, I have a gigabyte motherboard and I downloaded F5 version from their website and after extracting, one of the files is a firmware image file. When I load the file in the uefitools, I don't have the option to extract the capsules, so I assume I can skip the step where I have to extract the capsule and can write the file directly into the bios?
You have a BIOS pack made to be used by a special flashing software made by the laptop's manufacturer. To flash BIOS with a programmer you need a raw binary file, the size should be identical to the BIOS chip size.
I have a SZMZ X99M-G2 V1.0 bricked motherboard. The BIOS chip is KH25L12833F. I tried to recover it using CH341A and AsProgrammer. In the first time I tried, asprogrammer recognized the chip as MX25L12835F, then I tried to erase the chip content and the chip just died. Now it's not recognized anymore. I'm not able to detect, read or write. Can I use a Winbond 25Q128FVSG to replace the KH25L12833F?
Gonna try to reflash my MSI Tomahawk b660 ddr4 wifi, after adjusting ram latencies got a series of blue screens , battery, ram removal and replacing, slots changes, disconnecting everyhing, nothing has worked, this is my last hope. I think my bios is MX25U25673G, can you confirm? It looks like it has extra plastic covering the gull wings legs, hopefully I get a connection and it is 1.8v
@@Miyconst already joined discord, great server, guys are super helpful. My bios chip is ultra low profile and can not reach it with the clamps , scratching tha chip and motherboard pcb by trying. Gonna desolder it and try to flash it off circuit .
Hey @Myconst, i updated my Z840 with the HP Updater program, it was working allright, even i rebooted with out issue, but then i waited for a day, now it will not post, everything points to a corrupted bios, i have researched this CH341a programmer, but everyone says that it needs a driver, do you happen to have it? or with the AsProgrammer is not required?
Hi, i would like to use this to reflash my bios that is suspected to be infected. But i am worried about thsi programmer whether it itself contain virus(like badusb) or the driver itself. And i would like to ask if reflash the bios can remove the virus thanks
hola. intente todo y no me reconoce el chip. ademas , al conectar el programador pone el display FF y hace un pitido(ruido) muy fuerte. que podria ser? placa huananzhi x79 2.49, v3.1
Hi bro, i have asrock b350 pro4 and i dont know which version my bios chip is 24/25? I did look at the bios chip in motherboard but it doesnt show any numbers/letters. It should be 25 right?
Yes, you definitely have 25 series, but AMD boards need 1.8V, so you can't use CH341a out of the box, you need to either modify it for 1.8V or use a special adapter.
@@Miyconst Alright then thank you for your confirmation. Also yeah i bought 1,8v adapter aswell👍 Really good video and well explained bro, thanks once again!
Doesn’t matter what I do, the clip apparently just won’t properly get on the bios chip. The run led lights up but neoprogrammer always tells me that IC is not responding.
I love this guide bro! If you can explain in another video, how to install the 1.8V just in case we need to use it. So we know how to use it properly. Thanks
@@Miyconst I didn't have enough time to wait for china to send it. So I had to buy ch341a regular. I am going to be modding my laptop bios and reflashing my vega 56 tomorrow & need guidance asap. Thanks May I contact you via a community forum or discord or something for assistance with ch341a programming? You seem very smart & knowledgeable.
I got B550 Pro-Art and it's not bricked, it doesnt show the bios even after CMOS and flashback bios, should i consider to do this? It helped a lot of people
Are you sure your BIOS is compatible with your CPU? AMD BIOS chips are 1.8V so CH341A may kill it, make sure to use the 1.8V adapter if you decide to try to flash the BIOS.
hi there! I bought two of CH341A. every time I connect I got this error: I got the light on board on but nothing can be read in the PROGRAMMER Current programmer: CH341 ID(9F): FFFFFF(Unknown) ID(90): 9000(Unknown) ID(AB): AB(Unknown) ID(15): FFFF(Unknown)
@@Miyconst I tried many boards even(UNO R3) I am trying to do this : th-cam.com/video/V0g8cL1AfXY/w-d-xo.html I tried CH341A programm v1.13 AsProgrammer_1.4.1 (1) and Neo still can not detect any chip? I tired windows 7 too no avail!!! please help me out
@@joeurban2069 if you bring the machine to me, I can try to help, but from the distance it's hard to guess what is going on. How to use CH341a I have told in this video, already.
thanks for the tutorial..my huananzhi is the f8d plus...i bricked and need to reflash,,i saw a winbond w25q128jv is where is the ngff m.2 on the right...the first one...is this the chip to flash??i dont see on the board another one similar..can someone point me in the right direction,please?
Hi guys. Someone can tell me how to make a usb stick to run on a usb port if was disable ,without to have acces to the pc ? I got acces only to the usb port by when I insert the usb stick is not running . The power is on the usb but is not making connection. Pls Someone tell me if is a way how to do it
@@Miyconst i dont know.....buddy but i need serious help regarding this laptop....i need to continue my coding practice on this.......but my laptop is not starting....fan spins but turns off giving a blank screen i realized that it a bios issue and i need to fix this asap...but i am not able to find bios image for the laptop for wipro.....that is why i am tensed
This video is going to help a lot of people, thank you for making it!
It saved my x79 motherboard from trash bin. Really helpful video.
i guess Im asking randomly but does any of you know of a method to log back into an instagram account..?
I was stupid lost the password. I appreciate any tips you can offer me
Heads-up for those wanting to flash a bricked old X58 motherboard (Gigabyte X58A UDR3 Rev 2.0 here), I had no luck using AsProgrammer1.4.1, but was able to successfully flash my BIOS chip using CH14AProgrammer ver. 1.1.1.3.2.
Thanks for sharing the info.
@@Miyconst No problem. Ironically this was an Aliexpress refurbished board that the seller explicitly stated on the listing "Updated to the latest BIOS for maximum CPU compatibility"... didn't POST or put out any signal at all, tried absolutely everything you could think of... eventually I decided I may as well get a BIOS Flash Programmer tool as a last resort (return period had already passed before I tested the board as it looked very clean and like new) as I suspected the seller did not actually update the BIOS which would prevent my Xeon X5675 from being recognised... and what do you know... as soon as I flashed the BIOS the system worked perfectly haha... I think the lesson to be learnt is do not trust Aliexpress sellers to always be honest.
I bricked my x99 mobo trying to unlock the bios... Bought a ch341a programmer and followed this video, now my mobo works fine again!
Thank you very much!
Thanks for the support 🙂.
That's clearly best guide for me. My Hp 7200 MT workstation's bios had corrupted. I tried many ways to fix it, but failed. Finally, without desoldering, i followed your guide and made all steps. Your guide brought it back to life:) I appreciated. Thank you so much.
this is gonna be really handy with secure boot bricking everyone's gigabyte motherboards when they're trying to install windows 11
This has just happened to me
@@ULTRAJSKand to me 😂
@@CisumAPRAT What happened??
@@MrMalam1234bricked the bios on my gigabyte b450m ds3h while trying to enable secure boot for win 11, because i kept going fast in the bios menu 😂, but i reflashed the bios with the ch341a and everything is perfect 👌
Thanks for your work. It’s easy to see the love that you have for technology, and for sharing it. You are helping a lot of people ^^ I hope it returns double as you give. Have a nice weekend :) and keep doing that you love, you are doing great 🙌✨😁
Thank you Ricardo!
Phil's computer lab mentioned you today! Hell yes, your channel deserves so many more followers. Such great content.
Thank you for the support!
Clear and concise instructions. Really easy to understand. Made flashing my ROM easy. Thank you so much.
Absolutely amazing instructions and work you do for us! Thank you my friend! A life saver you are.
Most new chinese motherboard come with Winbond 25Q128JVSQ. What program do you use to flash it, because even CH341A 1.40 does not have that bios model listed.
As far as I know it's compatible with the Winbond W25Q128BV, at least I always select this option from the pop up window and it works.
Managed to save my board ,thanks.
Can CH341A write the bios on the following chip 'Winbond 25X/Q Series'??
Yes, as far as I know.
Poop up? Lol
if everyone know how to explain like you no one will get lost ever. thanks a lot .
❤️❤️❤️
Hi, I have a question. Maxsun b450m challenger is supports Ryzen 7 1700 but , in product page it says it requires different bios for that . But in the official website Ryzen 1000-5000 series requires *B1* bios . I don't if it has the latest bios then I put a Ryzen 7 1700 is that going to work.
Each motherboard has its own BIOS with a list of supported CPUs. If the seller says that you need another BIOS for R7 1700 then most likely it's true.
@@Miyconst seller said latest bios supports Ryzen 7 1700 . But the product description that need different bios. Can I buy it
Take screenshots of the conversation with the seller and if the motherboard doesn't work with R7 1700 - demand compensation or return the motherboard. I cannot guarantee you anything, it's not me who sells the motherboard and it's not me who writes the description page. 😃
This guide saved my B450i Strix, only thing I did differently was that I used Neoprogrammer.
Hey man! I've brick my b450i strix can you help me bringing back to life by telling me everything you did ? Thanks in advance
This item is helping me with badly modified bios.
I tried to change the logo of Asrock G41M-VS3. Didn't boot afterwards but I flashed it using file from official asrock site. It worked again.
My gigabyte board downloads bios as .fxxd files, and I'm not sure how to extract the binary given your tutorial. the only option the programmer gives me is to "extract image as is" and thats it.
What is the file size? Did you try flashing the file as-is?
Your channel deserves more subscriptions. Hope you will make many useful videos about computer engineering!
Hi there, what is the difference between 24x and 25x on CH341A programmer? thnx
Do you need to install drivers for the CH341A programmer?
Nope. It works as is.
@@Miyconst Oh, mine doesn't work. It says Check Settings in AsProgrammer
I need more info about your setup and the error to be able to help.
@@Miyconst i have the same issue it says "error connecting CH341(-1)" and there is a yellow light instead of green and it seems to dim when i connect it to the bios CHIP
@@waleedcj991 You have either connected something wrong or there is not enough power in your USB ports to power up the programmer and the BIOS chip.
I found a non working s400ca Asus Zenbook. that wil live another day thanks to this guide. Thank you very much!
Muhammad munir hi
Hello, if chip written Winbond 74M12JWSIQ 2138 , what size it is?
Like when you reach here after searching the solution for Lenovo 710Q chromium system
Anyone know how to read MX25L12833F it doesn’t seem to be supported anywhere
hi what do i do about write protected Old SREG: 11111111(0xFF), 11111111(0xFF)
Good tutorial
However, to clear CMOS you just use the jumper as indicated on the motherboard OR you remove the battery but not BOTH.
The program FLASHROM can be used from the command line, it does use CH341A as an option
Good luck
The clip is pretty useless. Its 'teeth' broke after 2 read/writes. Now it does not catch the chip and just slides off. 🙄
Maybe not all are fragile like that, but i wonder if you could solder some metal pins on the legs of the chip and use a USB extensor to connect the programmer on the computer then just attach the programer directly on those pins, so you don't need the clip.
@@fluthyer4362 ofcourse directly soldering wires works but that beats the purpose of easy plug and remove purpose of a clip.
But im guessing you are correct hbyiu said not all clips are fragile; i think i got a copy of a copy. Bad quality clip 😂
Yes kk, but still you won't need to remove the chip out of the motherboard and then put it back again, i think directly soldering wires is easier and more safe, but i think you can also find branded clips, i just don't know the price or where to find them, but they may be worth the price.
@@fluthyer4362 that is true. Direct soldering gives better contact than these clips. We need to seat the clips properly and even then sometimes while reading they might come off.
I havent seen any branded clips till now and they maybe expensive.
I got my X99-TF bricked and with this tutorial I was able to fix it, than you Myconst!!!
By the way, is there any place to learn in detail the different versions of the BIOS inside your tool?
Having the CH341a here, makes me want to make some test but I would like to know what is the difference between one and another.
Mi899 has a description for every BIOS option. You can launch the app and pick the BIOS you want. Beware: multiple BIOS flash with CH341A may break the BIOS chip or its legs.
Hi Marlon, I have a laptop that is bricked. I need to get a .bin file to use with ch341a. any idea on how to convert .exe file to .bin file for flashing?
@@denzil11975 Did you try to extract it using 7-zip?
Dear , i have brick x99-TF. you can help me ?
Can you remove or disable computrace using this method?
thank you very much, I admire your work you know a lot about computers, I was able to recover the bios of my motherboard thanks to you!
Can I flash 26xx bios chip in this programmer?
Where is the docu for the jumper switch and pin row ?
Going to flash a broken router. Fingers crossed!
You skipped one step, before starting to work with AsProgrammer, need to install CH341A drivers on PC, where u configuring new bios.
Thanks for your vid, very helpful!
True, I spent hours looking only to discover Windows update can download driver (under advanced options)
What page size? I've done it with 16 because it was a 16mb bios.rom
The answer is: it depends. Different BIOS chip use different settings. If yours work with 16 - use it.
@@Miyconst Thank you sir. If anyone ever has a bricked bios this will always be the first video I will recommend to people. The instructions are clear and not just for one specific motherboard generation.
@@Miyconst Because of you I fixed my Asus prime B350 bricked bios
bro, awesome tutorial. I have surface pro 3 which is locked at boot level. cannot even go to boot setup as well. right after boot screen it asks for password. is there a way i can flash the bios without opening the surface pro?
I am not aware of such a way. If you can't even enter the BIOS then I have no clue what else you could do.
i been searching for this video good job man
Thx for the PSU trick helped me a lot
Bro I want to reflash the bios on my dell optiplex 9010 (i5 3rd gen)
I checked online ....i found a product named USB Programmer CH341A Series 24 EEPROM Writer 25 SPI Flash BIOS Board Module USB to TTL 5V-3.3V
And a SOIC8 150mel Socket + SOIC8 Clip Adapter...
My question is ...will these things work on my pc....I found SOIC
200mel aswell ....which one to buy...
I csn share the website link if you want
Sorry, I can't tell you what is going to work without access to your Dell. Find the BIOS chip on the motherboard, check it's model and physical dimension, then check which programmer can read/write it. Most likely CH341A can do the job for you.
hey! Phil's Computer Lab made a vid about x99. he mentioned you 'cause of your unlock turbo boost vid! :)
That's nice. Could you please link me the video?
whoops, confused his name with Tech by Matt's. lol!
th-cam.com/video/hpUDGdDq4VQ/w-d-xo.html here's the vid
Can I know why the AMD b450 motherboard's latest bios not support older 1000 Cpu's
Because there are way too many AM4 CPUs and some motherboards have BIOS size limitation so they can't add support for everything.
Awesome tutorial mate. I'll have to try it when I get my ch341a. Only on question the ch341a is 3.3v and the datasheet from the eeprom chip says it needs 1.8v so I also ordered a adapter for 1.8v but I don't know how to connect it.
Install the adapter into CH341A and the BIOS connecting clip into the adapter, it's simple 🙂.
hello, do you have a bios collection for .bin? for my case i'm looking for the .bin file to reset a 8pin bios chip W25Q80DV and 25LB128D pc Lenovo. I would like to remove the password.
Sorry, I don't.
Complete and clear video with all the information needed and no other crap. Thank you very much
Been waiting for this, thank u!
Mr Miyconst thank you for saving my ass again with this guide. I had a little trouble as usual but I did it!
Good job figuring things out!
i have a gigabyte Z97X-UD7 TH board and when I press the? button all I get is an ID FFFF error I don't see a window popup. please help. (i got full RED LED so the full power is available)
Hi there. If you live in Sweden, you can ship or bring the motherboard to me. Otherwise I am not sure how to help.
Can you please sent me bios link for hp proobook 470 g1 rampage 12241-1 48.4yw03.011
Sorry, I don't have this BIOS.
I have a question, what would happen if you per exemple leave fans, cpu, rams on your motherboard while doing it?
These extra components may drain some extra current from the programmer and it may fail to detect or properly read/write the BIOS chip.
I have a bricked Nvidia gpu, gtx 1080, will these work for graphics cards?
Yes, it works. Make sure to identify your BIOS chip and check its voltage. For 1.8V chips you need a special adapter, otherwise it may blow up.
Hey got a Maxsun B650. Not sure which file to write with, in the BIOS folder I have 5 files:
3 EFI files (AfuEfix64, BootIa32, BOOTX64) - each 600KB file size
032 file - 32,000KB file size
NSH File - 1KB
Any ideas?
032 file is the BIOS. For the B650 board you most likely need 1.8V adapter.
@@Miyconst Thanks, appreciate it.
Came back to just say thanks again, verified it's a 1.8V chip.
Hi how do I remove/bypass password from Lenovo to yoga 260 please thankyou
Sorry, I don't know that.
How did you assemble the ch341a? you completely skipped over that
Hm, what do you mean? Mine came assembled and ready to use.
windows 11 brought me here ^^
Can I program Winbond 25Q32FVSIG with this tool.
I think so.
Hi! I have one Ausek/Hiniso/Ourlife actioncam AT-S81TR with sx16-1000 rechargable battery (with orange strip at top). I upgraded a wrong "sphost.brn" in this camera, now won't turn on. The previous software/firmware was SBC_V37-01.04.05 --- Can you help me please to unbrick this camera? What uploader for firmware should i use? Anyone the right brn? Pressing the buttons can reset something? How to replace firmware? Windows 10 don't recognise any actioncamera driver at all again. Jtag? Any help or sugestion and backup-file!?... Thanks!
The only way to revive the camera is the hardware firmware flash but I really doubt that you could do it with a CH341a, still you can try to disassemble it and locate the firmware/BIOS chip and check its specs.
@@Miyconst The asian producers of this camera didn't answer for help, neither respond in the official page. First i need a backup rom for this. And some technical data from producers. I'm still waiting...
Hi. I have Problem with writing/programming.
I have a Gigabyte ga-z87x-d3h motherboard and BIOS file is Z87XD3H.F9. Power is connected (to mainATX and to ATX(CPU)12V 2x4). XEON processor, Clock battery and ddr3-memory (4pcs) and system fans are connected to mobo, nothing else.
I have read both BIOS CHIPS (it is multiBIOS MX25L6473E), reading gone fine and both chips are full of FF(empty).
BUT when trying to do anything else with Asprogrammer 2.1.0.13, it did not happen:
1. Erace IC, it starting to do but never end
2. Program IC, starting to do, no progress in bar (red and yellow lights are on)
No error messages, but this never ends.
Can anyone help me?
Problem in machine is that suddenly it sopped working. When pressing power button PSU starts and fans rolling couple of seconds. Then all stops to start again etc... I tried to reset bioses first by short-circuiting those...
Thanks for this guide, it is very clear!
hi!, can this help me with my rx 480 8gb gpu? it has bad vbios from wrong flash
I could help, but I can't guarantee that. You have to verify what BIOS chip is used on your RX 480.
Will it clone Bsi for Peugeot?
Thank You for the awesome tutorial! 👍🏼👍🏼👍🏼
where find that case
Which case?
my chip is 32 mb but the bios i downloaded from the gigabite website is only 1.41 mb, i cant find the correct bios for GA-78LMT-USB3
hello, i bricked my x99 board bios and now it wont boot, i tried following this video but multiple things happen:
1. at first the program said Error connecting CH341(-1)
2. after removing cpu it said in the console 4 parameters which were all ffff or 0000 so i kept trying and nothing happend
3. the run led on the programmer became yellow and now its yellow even when its not connected
any help would be great as i am stuck with a bricked pc because of a stupid mistake i made
Thank you for the video first of all. Since I see likes to post, I'll go ahead and ask: I'm using a NeoProgrammer v2.2.0.10 but so far when I want to open the repaired BIOS Image that someone has done for me, that has access to LBE++ BIOS Extractor (dealing with an HP BIOS here), I get the error message File not open, press ok to ignore & risk data corruption or abort to kill the program. Any ideas why that happens? What going wrong?
When I press ok, the cursor on the laptop I'm using (since mine is well the patient not doing so well) just does an infinite loading circle.
Man i really appreciate what you doing. I studying those things and this is really good , short and simple explanation.
Much appreciated and good luck to you ❤❤
My bios chip (Winbond W25Q256JVEQ) doesn't appear in the "IC" of AsProgrammer... What can I do? Thank you.
Anyone try this programmer with a cmos chip called: macronix mx25u12872f?
Please, tell me if its compatible. My gigabyte MB get bricked and boot loop.
Thanks
Hey mate, thanks for the video, I do have a question, I have a gigabyte motherboard and I downloaded F5 version from their website and after extracting, one of the files is a firmware image file. When I load the file in the uefitools, I don't have the option to extract the capsules, so I assume I can skip the step where I have to extract the capsule and can write the file directly into the bios?
That's correct. You probably can just write the file. As far as I know, Gigabyte doesn't use capsules, it's only Asus.
@@Miyconst ah right thanks mate
Can anyone tell me how to flash bios to laptop if its size is 35mb and chip is only 32mb?
You have a BIOS pack made to be used by a special flashing software made by the laptop's manufacturer. To flash BIOS with a programmer you need a raw binary file, the size should be identical to the BIOS chip size.
Can I use ch341 on my hp 735 g5 to ulock bios password?
Probably yes, but you can just clear CMOS to remove the BIOS password.
Need firmware for hard disk ST350413AS JC66 firmware as ic is corrupted
I have a SZMZ X99M-G2 V1.0 bricked motherboard. The BIOS chip is KH25L12833F. I tried to recover it using CH341A and AsProgrammer. In the first time I tried, asprogrammer recognized the chip as MX25L12835F, then I tried to erase the chip content and the chip just died. Now it's not recognized anymore. I'm not able to detect, read or write. Can I use a Winbond 25Q128FVSG to replace the KH25L12833F?
Theoretically it should be possible to use Winbond, but I have never done so, thus I don't know.
@@Miyconst I succesfully replaced KH25L12833F with a Winbond 25Q128FVSG. Now my motherboard is working. Thanks.
Gonna try to reflash my MSI Tomahawk b660 ddr4 wifi, after adjusting ram latencies got a series of blue screens , battery, ram removal and replacing, slots changes, disconnecting everyhing, nothing has worked, this is my last hope.
I think my bios is MX25U25673G, can you confirm?
It looks like it has extra plastic covering the gull wings legs, hopefully I get a connection and it is 1.8v
Unfortunately, without the motherboard on my hands I can't confirm or deny anything, but good luck reviving it!
@@Miyconst already joined discord, great server, guys are super helpful.
My bios chip is ultra low profile and can not reach it with the clamps , scratching tha chip and motherboard pcb by trying. Gonna desolder it and try to flash it off circuit .
its been a weak im searching a driver for this programer
i hope u can help me sir
,thank you sir
The driver should be available in the same GitHub repository.
Wow. This is an incredible resource. I cannot put into words how thankful I am! :)
Can you tell me what is the kllisre x99 d8 chip? I bricked the motherboard but I have the usb programmer xd
If you dont have the button Detect on the CH341a Programmer, you only need to install the driver of the CH341a.
Do you need a second pc to perform this function?
Yes.
Hey @Myconst, i updated my Z840 with the HP Updater program, it was working allright, even i rebooted with out issue, but then i waited for a day, now it will not post, everything points to a corrupted bios, i have researched this CH341a programmer, but everyone says that it needs a driver, do you happen to have it? or with the AsProgrammer is not required?
The driver is available in the AsProgrammer folder.
@@Miyconst thank you so much, BTW you make great videos
Golden channel--- nice content-- subbed immediately 💯
This is a great tutorial that explained things well enough that my monkey brain could follow it. Thanks!
Hi, i would like to use this to reflash my bios that is suspected to be infected. But i am worried about thsi programmer whether it itself contain virus(like badusb) or the driver itself. And i would like to ask if reflash the bios can remove the virus thanks
hola. intente todo y no me reconoce el chip. ademas , al conectar el programador pone el display FF y hace un pitido(ruido) muy fuerte. que podria ser?
placa huananzhi x79 2.49, v3.1
Hi bro, i have asrock b350 pro4 and i dont know which version my bios chip is 24/25? I did look at the bios chip in motherboard but it doesnt show any numbers/letters.
It should be 25 right?
Yes, you definitely have 25 series, but AMD boards need 1.8V, so you can't use CH341a out of the box, you need to either modify it for 1.8V or use a special adapter.
@@Miyconst Alright then thank you for your confirmation. Also yeah i bought 1,8v adapter aswell👍
Really good video and well explained bro, thanks once again!
Doesn’t matter what I do, the clip apparently just won’t properly get on the bios chip. The run led lights up but neoprogrammer always tells me that IC is not responding.
This could happen. The only solution is to desolder the chip.
@@Miyconst 😢
I love this guide bro! If you can explain in another video, how to install the 1.8V just in case we need to use it. So we know how to use it properly. Thanks
It's better to just buy the blue version of CH341a that has a voltage switch.
@@Miyconst I didn't have enough time to wait for china to send it. So I had to buy ch341a regular. I am going to be modding my laptop bios and reflashing my vega 56 tomorrow & need guidance asap. Thanks May I contact you via a community forum or discord or something for assistance with ch341a programming? You seem very smart & knowledgeable.
Feel free to join my Discord and ask there. Some of the other members should be able to help even if I am not online.
As always, everything is super. Waiting for new cheats from your side
I got B550 Pro-Art and it's not bricked, it doesnt show the bios even after CMOS and flashback bios, should i consider to do this? It helped a lot of people
Are you sure your BIOS is compatible with your CPU? AMD BIOS chips are 1.8V so CH341A may kill it, make sure to use the 1.8V adapter if you decide to try to flash the BIOS.
@@Miyconst yes it's ryzen 7 3700x
anyone help?? Chip eraring completed, please check is empty!
i did detect the chip, i cant get mobo working
hi there! I bought two of CH341A. every time I connect I got this error:
I got the light on board on but nothing can be read in the PROGRAMMER
Current programmer: CH341 ID(9F): FFFFFF(Unknown) ID(90): 9000(Unknown) ID(AB): AB(Unknown) ID(15): FFFF(Unknown)
This means that the BIOS chip is either not detected or the programmer doesn't have enough power. What motherboard is that you are trying to revive?
@@Miyconst I tried many boards even(UNO R3)
I am trying to do this :
th-cam.com/video/V0g8cL1AfXY/w-d-xo.html
I tried CH341A programm v1.13 AsProgrammer_1.4.1 (1) and Neo
still can not detect any chip?
I tired windows 7 too no avail!!!
please help me out
@@joeurban2069 if you bring the machine to me, I can try to help, but from the distance it's hard to guess what is going on. How to use CH341a I have told in this video, already.
thanks for the tutorial..my huananzhi is the f8d plus...i bricked and need to reflash,,i saw a winbond w25q128jv is where is the ngff m.2 on the right...the first one...is this the chip to flash??i dont see on the board another one similar..can someone point me in the right direction,please?
That seems like the chip you need.
Jokes on u. My motherboard is already bricked.
It's time to revive it ;)
Hi guys. Someone can tell me how to make a usb stick to run on a usb port if was disable ,without to have acces to the pc ? I got acces only to the usb port by when I insert the usb stick is not running . The power is on the usb but is not making connection. Pls Someone tell me if is a way how to do it
i have a old wipro laptop and the bios is not functioning........i dont know form where to download bios for that please need help
Hi. How can I help in this case?
@@Miyconst i dont know.....buddy but i need serious help regarding this laptop....i need to continue my coding practice on this.......but my laptop is not starting....fan spins but turns off giving a blank screen i realized that it a bios issue and i need to fix this asap...but i am not able to find bios image for the laptop for wipro.....that is why i am tensed
Hi miyconst, my atermiter x99 shows code 61 and just stays and does nothing. Do I use this tool to refresh bios?
Good morning sir I have one question for you , I have CH341a and I have clip SPI 8 and now I have clip SPI 16 so how to use with this programmer?
I'm flash and disconected tool. Reboot but main just show code FF. What's wrong with me ?
The flash didn't go through or you used wrong BIOS.
@@Miyconst I'm flash the bios from home page of huananzhi - fail, not same. I'm flash a bios mod from mi899, and it working. thank bro !