Excellent video! Thank you for the comparisons. I had an AT pro until a couple of years ago. You proved what I already suspected about its lack of depth.
At last, a great video comparing the XP Deus and the Equinox - please post some more videos, especially comparative videos on the XP Deus vs the Equinox! Great video, thanks for posting...both machines are very close in performance!
Great test. I have the same 3 detectors and I did this test also in my south Alabama soil and got almost the exact same results as your test. Great video.
I wanted to see the Equinox in Gold mode at the higher frequencies on the Gold at 6" because I really want to see how this VLF might compare to a PI on even a nugget 1/3 of that size. Thank you for the tests it was great information.
This will be a good comparison if deus and equinox are set to their maximum program settings,on deus basic program sucks a lot.Also put equinox on same frequency as deus, do manual ground balance on both machines and try to set the maximum of them then the battle will be fair.
It also makes a difference if the coin is in its natural found state not re buried as i once dug up a silver sixpence on sound and didnt look at the display reading at over 12" with the AT pro and then reburied it to take note of any display reading and it wouldnt even pick it up! so it proves that the mineralisatian from the coin leaching into the earth makes a difference.I have also now bought a XP deus and that is a beautiful machine.
I have an old Garrett's GTA X500 that out performs most of the later Garrett's metal defectors like the AT Pro, Max etc. I also have a new Mine Lab Equinoxes 800 with all three coil's. The Box 800 will hit anything I'm looking for. I use mine mainly for Gold and its a winner hands down.
The test we all been waiting for ! good job, what missing is to see who win the reactivity challenge ( and challenge of reactivity at depth and usability ) and the id accuracy and how is it dispatched , because what i like with the sovereign is the id range is big 250 and you can really say this sound is for that target and it accurate most of the time ... the equinox seem to have like a range of 100 and not as accurate as the sovereign . that why a test would be nice. thumb up ! gl hf
I am right there with you. I will probably keep the AT Pro for guests or wife to use when we go hunting. I just have to wait till Sept to get mine - birthday gift for myself. Hmmm anniversary is August maybe I can talk her into getting it early :)
It's nice to see a test where someone has taken the time to bury stuff. Air tests are fine - and easy to do - but seeing the results of actual in-ground targets is awesome. I'm still awaiting the arrival of my Equinox 800. I'm chomping at the bit while I watch video after video - ha.
You all prolly dont give a damn but does someone know a method to get back into an instagram account?? I stupidly lost the account password. I would appreciate any tricks you can give me
@Remington Zechariah Thanks so much for your reply. I got to the site through google and Im waiting for the hacking stuff now. I see it takes a while so I will get back to you later when my account password hopefully is recovered.
This is the one everybody has been waiting for deus vrs nox ,there's not a lot between both machines on depth , would like to see a few rusty nails thrown in mix for next video ,thanks for posting
I rarely comment on metal detecting videos, but I had to in this case. great video and review of these machines. You definitely earned this like and subscription!
I’ve just hung up my AT Pro after my NOX 800 purchase. Went out in my own yard for an hour and found all kinds of treasure including an 1838 Seated Half Dime. My Pro didn’t even hear it.
@@Gigmaster how do they compare in the soil? I haven’t detected a beach before but now I feel I need to go back to my old permissions and hit them again.
I've been waiting for an independent review of the equinox 800 before I sold my ctx to get one and I think this has sold me one it. I'll still keep my deus as my primary machine because I still think it would out shine the equinox when using a different program I know this for a fact as I have dug items smaller than the gold nugget using Gary's ultimate program at 12-14inchs it would be good to see a comparison between the box and the deus after people have had more time to play around with the box to learn how to tweak the programming for best results we'll have to wait and see cheers 🍻
couldnt agree more mate. once you get it, theres no point using anything else. best machine out there for the professional deccy. wish i had one 25yrs ago!
Great test as I have been looking for a machine to go in water with, I have been looking at the Deus, At Pro and the Minelab Equinox 800. The price difference of $400 + will seal the deal for me and i like multi Frequence machines I'm Getting the Minelab.
Hello sir This is Mohammad I want to inquire about the identification numbers of the Equinox device regarding gold coins..I am in an archaeological area in the Middle East..and what are the best settings for gold made Thanks a lot
Thanks for the Video, I have an AT Pro and was considering the 800 and the F75Plus to replace the ATPro. I Mainly do relic hunting in the woods. At least for me it would be interesting if the F75Plus would work as deep as the 800 on Coppers and Bullets.
Great video, you worked hard there. I have an at pro, which i love, but now i"m thinking to sell on for an equinox 800 or 600. Keep swinging mate. Regards John S.Wales UK
Hello good afternoon GIGMASTER .... I would like you to give me your opinion of which detector to choose .... taking into account that I have a garrett ace 150. What do you recommend of these 3 devices: White TM 808, MAKRO MULTI KRUZER AND EQUINOX 800 ?
Great comparison video. Be interested to see how an AT Max performs as well (upgrading and can’t decide between a Nox and the Max). Thanks for the Vids - keep ‘em coming please 👍🏻
Get the Nox! The AT series is no competition against it! I have an AT Gold, but if you go to Calabash Digger's channel, he does many thorough comparisons with all the AT series, including the Max, and it is blown away by the Nox! I just bought a Nox myself!
Might try that test with the same size coils on all the machines.Maybe someone like nel makes coils the same size for all three.I mean it's kinda known that size does matter when it comes to metal detecting.
My Whites MX sport hits targets at a foot regularly and deeper with the sensitivity cranked. On the beach I've dug large alum at two feet, crazy, I know. I have a hard time finding gold but silver, bullets, fishing weights and coins can't escape me.
what did you have the sensitivity set to on the at-pro? cause I find it hard to believe its not detecting a walking liberty at a foot,im kinda sensing your not a garrett fan...
Thanks for sharing...very interesting comparison. Took a lot of time too so we all really appreciate you doing that! Can you address the AT Pro sensitivity questions below? (Maybe you did already and I missed it).
you need the HF elliptical coil for the deus to go deep, and use gold mode on the equinox with the small coil, you will be close on the 6 inches, I find fly poop with the ORX
not a very good test when you turn the sensitivity down on the at pro, anyone who has used an at pro knows better than what you are saying. looks like you are trying to impress Minelab or something....
The AT would have performed better if the sensitivity was at its max. This is not to say that it would have been as good or better then the other two in those test beds. I use an AT and have for several years and in the right conditions and coil, have dug very deep coins. Is there a chance you could try the AT at max?
I have been using AT Max just bought the Nox 800 because I felt I was missing things in heavy iron. I hunt 1800s to turn of the century yards and old home places. I also Civil War Relic Hunt. Calabash digger gave me a Parks 2 program he uses to relic hunt It appears you like Field 2? What program would you recommend to a new 800 user
I'd love to see how it does in the hot soil of Culpepper. I know it won't hold up compared to pulse machines but curious how it would compare to other vlf's.
Thanks for this video. It is nice to see those comparisons, altough the size of the coils are not equal ;) But annyway, Over the 25 years that i´m searching a had multiple Garretts, minelabs, White´s and even a Laser Rapier (I still have btw) I´m now searching for over 10 years with a XP Deus (started with SW2.0, now recently updated to 5.0). I have to admid that altough Minelab Is working on multiple frequences, i had more gold finds with the Deus.
I use the pro and max. What is the sensitivity? I pull copper and silver in pro zero both machine's. No discrimination. I pull lead 12 inches all the time. Coins are tricky but, I do believe the test was a good base line test.
Nice test video, thanks! Other tests I'm looking for is the Equinox 800 vs AT MAX vs White's TDI SL. I currently have an AT Pro and am going to purchase a better machine for gold at the beach. It's going to be one of those three.
Awesome video. You can make deep targets sound like shallow and be very loud, that's what I think the biggest plus is for the Deus. The Equinox does not seem to be able to make deep targets louder.
That was cool I goggled xp deus and you can touch on blocks of what is being searched. I was interested in how the deus compared to the equinox. The equinox which I have, was searching the gold nugget in field mode...
I did not turn it down that is standard when you reset the machine. The Standard on the equinox was down also. It is at 20 in the standard mode I was using and it goes up to 25.
Got an NEL coil for my AT Pro and definitely does better than the standard coil! I just used all standard equipment and standard settings to be fair in the test.
these guys can't comprehend what STANDARD is? No...lets put the AT PRO on highest sensitivity and add the nel coil and lower the 800...now we have a fair test??? LOL Crazy!
It is working great now. The only thing I did was take the coil cover off and scrub the coil off. Dont know if that is what fixed it but it is working great right now.
unfair test the Deus is only in Basic one which is very tame wheras the Equiniox is in Field mode which is a more powerful setting to be fair the Equinox should be in Park mode
There is one thing that you do not disclose on your video. When you got the hit with the XP Deus were you running with the VLF frequency or with the HF frequency which reads metal at a deeper location.
you should have stuck the excal. in the mix.......does good in the dirt also....surprises many - great vid steve.....now when you go out with beaver things will be more equal.....our guy says maybe mid week on some of our 8 box's....good luck
I put my AT PRO in the closet last year after trying a xp deus.
It was crazy how much more stuff i found where i had used the At PRO before.
At pro shit yes fuck this game
That's a great job, Gigmaster--a solid real-world comparison. Thanks, Clive
Definitely one of the best metal detecting videos I have watched to date, great video and you are a very listenable :)
Awesome man! Thanks!
Excellent video! Thank you for the comparisons. I had an AT pro until a couple of years ago. You proved what I already suspected about its lack of depth.
Thank you for taking the time for doing the video. This was what I was waiting to see.
Nice for taking the time to do this and share it with everyone. 😎 GB&HH!
Fantastic field test! Thank you.
I have had an AT Pro for almost 10 years. My XP Deus is in the mail. I cannot wait to go back to all the places I have been so far with the XP.
let me know if you need help with your New XP machine
At last, a great video comparing the XP Deus and the Equinox - please post some more videos, especially comparative videos on the XP Deus vs the Equinox! Great video, thanks for posting...both machines are very close in performance!
Great test. I have the same 3 detectors and I did this test also in my south Alabama soil and got almost the exact same results as your test. Great video.
Thanks for taking the time and the 3 screens are great
Well done ! Solid information ---just what we prospective purchasers need. Just the long wait now here in the U.K.
Great video, Gigmaster!! Thanks a bunch!!!
Nice real test. Thanks for posting Gigmaster!
I wanted to see the Equinox in Gold mode at the higher frequencies on the Gold at 6" because I really want to see how this VLF might compare to a PI on even a nugget 1/3 of that size. Thank you for the tests it was great information.
Hallo, set the Silencer on the Deus on minus 1, that makes more than a little on depth!
Also adjust the reactivity on the deus
Now put the deus in a mode that ain't switch on and swing mode
AT Pro needs to be on full sensitivity and Deus needs to be tweaked for max depth too. Dont know anything about Equinox to comment on settings.
6:45 ALRIGHT
This will be a good comparison if deus and equinox are set to their maximum program settings,on deus basic program sucks a lot.Also put equinox on same frequency as deus, do manual ground balance on both machines and try to set the maximum of them then the battle will be fair.
Fantastic! Thanks Gig
It also makes a difference if the coin is in its natural found state not re buried as i once dug up a silver sixpence on sound and didnt look at the display reading at over 12" with the AT pro and then reburied it to take note of any display reading and it wouldnt even pick it up! so it proves that the mineralisatian from the coin leaching into the earth makes a difference.I have also now bought a XP deus and that is a beautiful machine.
Thank you for the test.
I have an old Garrett's GTA X500 that out performs most of the later Garrett's metal defectors like the AT Pro, Max etc.
I also have a new Mine Lab Equinoxes 800 with all three coil's. The Box 800 will hit anything I'm looking for. I use mine mainly for Gold and its a winner hands down.
That's a lot of work and time to show us results. Thanks so much.
The test we all been waiting for ! good job, what missing is to see who win the reactivity challenge ( and challenge of reactivity at depth and usability ) and the id accuracy and how is it dispatched , because what i like with the sovereign is the id range is big 250 and you can really say this sound is for that target and it accurate most of the time ... the equinox seem to have like a range of 100 and not as accurate as the sovereign . that why a test would be nice. thumb up ! gl hf
That was a fair test, thanks.
Thanks for the video. Would love to see a test with a gold chain and gold ring , if possible! Thank you and HH!
Thx !! Interesting test. But no conclusions should be make out of it for buying one of these detectors. Settings is key.
Great video, I have a AT Pro but it's getting sold ASAP and I'll be getting the nox 800.
I am right there with you. I will probably keep the AT Pro for guests or wife to use when we go hunting. I just have to wait till Sept to get mine - birthday gift for myself. Hmmm anniversary is August maybe I can talk her into getting it early :)
It's nice to see a test where someone has taken the time to bury stuff. Air tests are fine - and easy to do - but seeing the results of actual in-ground targets is awesome.
I'm still awaiting the arrival of my Equinox 800. I'm chomping at the bit while I watch video after video - ha.
You all prolly dont give a damn but does someone know a method to get back into an instagram account??
I stupidly lost the account password. I would appreciate any tricks you can give me
@Kobe Brayden Instablaster =)
@Remington Zechariah Thanks so much for your reply. I got to the site through google and Im waiting for the hacking stuff now.
I see it takes a while so I will get back to you later when my account password hopefully is recovered.
@Remington Zechariah it worked and I finally got access to my account again. Im so happy:D
Thanks so much, you really help me out :D
@Kobe Brayden You are welcome :D
This is the one everybody has been waiting for deus vrs nox ,there's not a lot between both machines on depth , would like to see a few rusty nails thrown in mix for next video ,thanks for posting
TheBrookmeister yes that will be a cool test since sound is the key!
I rarely comment on metal detecting videos, but I had to in this case. great video and review of these machines. You definitely earned this like and subscription!
Put the 6” coil on the equinox and it will blow all of them out of the water. It won this test even in basic mode with the 11 inch coil imo tho.
I’ve just hung up my AT Pro after my NOX 800 purchase. Went out in my own yard for an hour and found all kinds of treasure including an 1838 Seated Half Dime. My Pro didn’t even hear it.
Congrats
I have 2 AT pros and found some great stuff with them but no comparison when it comes to the beach.
@@Gigmaster how do they compare in the soil? I haven’t detected a beach before but now I feel I need to go back to my old permissions and hit them again.
Thanks Steve. Excellent job.
I have a deus and equinox. I love my deus in farm fields. But my depth isn’t there. I must be doing something wrong on my deus. What’s your tips
You need to swing the Deus faster!
I've been waiting for an independent review of the equinox 800 before I sold my ctx to get one and I think this has sold me one it. I'll still keep my deus as my primary machine because I still think it would out shine the equinox when using a different program I know this for a fact as I have dug items smaller than the gold nugget using Gary's ultimate program at 12-14inchs it would be good to see a comparison between the box and the deus after people have had more time to play around with the box to learn how to tweak the programming for best results we'll have to wait and see cheers 🍻
couldnt agree more mate. once you get it, theres no point using anything else. best machine out there for the professional deccy. wish i had one 25yrs ago!
will the 800 do better for gold when set in the gold mode ??
Great test as I have been looking for a machine to go in water with, I have been looking at the Deus, At Pro and the Minelab Equinox 800. The price difference of $400 + will seal the deal for me and i like multi Frequence machines I'm Getting the Minelab.
Can you please try the Nokta Makro Anfibio Multi against these models? It would be interesting to see how the "Up and Comer" can do.
Hello sir
This is Mohammad
I want to inquire about the identification numbers of the Equinox device regarding gold coins..I am in an archaeological area in the Middle East..and what are the best settings for gold made Thanks a lot
Very nice test, I would say the Minelab Equinox 800 can ID things better. Minelab Equinox 800 won from what I saw.
probably equinox has a bigger coil? if you put bigger coil on deus i'd see other results ;)
thanks for the effort of your work and video very happy with this thank you so much from Australia ill be going the 800 for sure
Thanks for the Video, I have an AT Pro and was considering the 800 and the F75Plus to replace the ATPro. I Mainly do relic hunting in the woods. At least for me it would be interesting if the F75Plus would work as deep as the 800 on Coppers and Bullets.
knowing that they are there HELP,S
a lot !!
anyway , good results and great clear test , thanks for sharing
Great video, you worked hard there. I have an at pro, which i love, but now i"m thinking to sell on for an equinox 800 or 600. Keep swinging mate. Regards John S.Wales UK
Great info. Thank you Gigmaster.
Hello good afternoon GIGMASTER .... I would like you to give me your opinion of which detector to choose .... taking into account that I have a garrett ace 150. What do you recommend of these 3 devices: White TM 808, MAKRO MULTI KRUZER AND EQUINOX 800 ?
I only have experience with the Equinox so I can not in good faith make a recommend between those 3.
Great comparison video. Be interested to see how an AT Max performs as well (upgrading and can’t decide between a Nox and the Max).
Thanks for the Vids - keep ‘em coming please 👍🏻
adrobbo Well the Deus costs twice as much as the AT Max so it would be pretty embarrassing if it didn't smashed it.
Beskar 501 you would be happier with the nox
Get the Nox! The AT series is no competition against it! I have an AT Gold, but if you go to Calabash Digger's channel, he does many thorough comparisons with all the AT series, including the Max, and it is blown away by the Nox! I just bought a Nox myself!
Minelab equinox 800
vs
aka mfd signum 7252 classic
vs
Xp ORX deus
vs
Nokta Gold Kruzer Metal Detector
Tell me the best product
Might try that test with the same size coils on all the machines.Maybe someone like nel makes coils the same size for all three.I mean it's kinda known that size does matter when it comes to metal detecting.
Great video. Would love to see this test with the xp orx and a White's MXT all pro. Also using the gold programs....
Awesome test. Thanks.
awesome video buddy THANKS A BUNCH!!!!!!
My Whites MX sport hits targets at a foot regularly and deeper with the sensitivity cranked. On the beach I've dug large alum at two feet, crazy, I know. I have a hard time finding gold but silver, bullets, fishing weights and coins can't escape me.
I considered that machine too. Looks good.
My sport hits crazy deep as well. Was hitting half dimes at 8 inches! Would love to see it compared to the nox
what did you have the sensitivity set to on the at-pro? cause I find it hard to believe its not detecting a walking liberty at a foot,im kinda sensing your not a garrett fan...
I loved my AT Pro! Found some awesome stuff with it. It did have issues at the oceanfront. Lots of chatter everywhere else great!
@@Gigmaster yes,it hates seawater.....and also I found out it hates underground fencing for cows too....
Nice video, what were the program or settings were used for the Deus?
you must be blind it says in the bottom corner on every dig
No need to call me blind. Totally missed it. Sorry, watched it on my phone.
I'm calling Shenanigans!!! You have the AT Pro Sensitivity set to 50%. It's little wonder it's not picking up those targets!!!
Yep, I always run my AT PRO at full sensitivity and have pulled many items a foot deep. Even very small nail caps.
Thanks for sharing...very interesting comparison. Took a lot of time too so we all really appreciate you doing that! Can you address the AT Pro sensitivity questions below? (Maybe you did already and I missed it).
you need the HF elliptical coil for the deus to go deep, and use gold mode on the equinox with the small coil, you will be close on the 6 inches, I find fly poop with the ORX
Great test. It was hard to tell but, was the sensitivity turned down 2 bars on the AT?
Yes
not a very good test when you turn the sensitivity down on the at pro, anyone who has used an at pro knows better than what you are saying. looks like you are trying to impress Minelab or something....
Good test ,but why did you run the at pro with the sensitivity down too bars and the rest on max
The AT would have performed better if the sensitivity was at its max. This is not to say that it would have been as good or better then the other two in those test beds. I use an AT and have for several years and in the right conditions and coil, have dug very deep coins. Is there a chance you could try the AT at max?
We're the only ones that noticed... Look at the Equinox screen it was at full power..
Nice test! Thanks
Good test. I appreciate you sharing this. Thank you. Also new subscriber here. Drooling and waiting for my Equinox 800 to be delivered.
I have been using AT Max just bought the Nox 800 because I felt I was missing things in heavy iron.
I hunt 1800s to turn of the century yards and old home places. I also Civil War Relic Hunt.
Calabash digger gave me a Parks 2 program he uses to relic hunt
It appears you like Field 2? What program would you recommend to a new 800 user
Great test
I'd love to see how it does in the hot soil of Culpepper. I know it won't hold up compared to pulse machines but curious how it would compare to other vlf's.
Me too!
Thanks for this video. It is nice to see those comparisons, altough the size of the coils are not equal ;)
But annyway, Over the 25 years that i´m searching a had multiple Garretts, minelabs, White´s and even a Laser Rapier (I still have btw) I´m now searching for over 10 years with a XP Deus (started with SW2.0, now recently updated to 5.0).
I have to admid that altough Minelab Is working on multiple frequences, i had more gold finds with the Deus.
Great machine!
Great video, thanks for posting, well done.
XP Deus is basic mode. BASIC. Sound like a legit test to me.
Bonjour, quel réglage avez vous mis sur L’AT pro ? Ça m étonne qu il ne prenne pas les cibles...
On voit que la sensibilité n'est pas au max sur l'at pro
That was a great test. Thank you
Do you think the Simplex could have similar results?
The bird. In the back ground. He got them all!
Thanks Gig,would the 600 be good for me here in the Illinois farm fields?
800 has more options
Thanks Gig , Fantastic
I use the pro and max. What is the sensitivity? I pull copper and silver in pro zero both machine's. No discrimination. I pull lead 12 inches all the time. Coins are tricky but, I do believe the test was a good base line test.
Merhaba garrett at pro mu at max mı daha iyidir?
Great video, thanks!
Thanks for the video, that was a good pre-hunt warm-up. Now catch up with Doc and shoot us another field of pits or dreams video. 👍
Check the winners for the February giveaway!
you test the DEUS on Basic 1 ? of all the presets probably it weakest the deepest program would be Gold field on the Deus
Gold on the Equinox is deeper too I was just trying to be fair on the test.
@@Gigmaster Do you cranked the sensitivity up on the ATPro?
Nice test video, thanks! Other tests I'm looking for is the Equinox 800 vs AT MAX vs White's TDI SL. I currently have an AT Pro and am going to purchase a better machine for gold at the beach. It's going to be one of those three.
Awesome video. You can make deep targets sound like shallow and be very loud, that's what I think the biggest plus is for the Deus. The Equinox does not seem to be able to make deep targets louder.
I agree in the standard modes that seems to be true but there are tone adjustments on the nox I have not tried yet.
Yes, I found the tone and volume adjustments for specific tones....but nothing to make deep targets the same volume as shallow targets.
That was cool I goggled xp deus and you can touch on blocks of what is being searched. I was interested in how the deus compared to the equinox. The equinox which I have, was searching the gold nugget in field mode...
nice video! what about the makro kruzer?
AT Pro needs to be on full sensitivity not half .You are not fair !
What is the retail price of each detector?
Equinox 800 is $899, XP Deus is around $1,500 and the AT Pro around $550?
Looks like Equinox is best for the buck.
You got the pro maxed out in sensitivity ?
None were maxed out. All were set on the manufactures default. All of them could have been higher but probably with a lot of chatter.
Which should i buy the XP deus or the Equinox 800?
68camaro If you are in the water I would recommend equinox.
How much ur equinox 800?
Hy mr gig man is it better to have a high number or a lower number?
Depends on what you want!
Thanks nice job I love my Deus just dug a 1949 Franklin half but I’m getting a Equinox when they are available
Bit surprised you turned down the sensitivity on the at pro
I did not turn it down that is standard when you reset the machine. The Standard on the equinox was down also. It is at 20 in the standard mode I was using and it goes up to 25.
Good catch... This guy is definitely trying to rig the test. I hit Quarters all day at 12' with the Pro and NEL coil
Got an NEL coil for my AT Pro and definitely does better than the standard coil! I just used all standard equipment and standard settings to be fair in the test.
these guys can't comprehend what STANDARD is? No...lets put the AT PRO on highest sensitivity and add the nel coil and lower the 800...now we have a fair test??? LOL Crazy!
enjoy your vids Gig!!
thanks!
did you send that 800 back??
It is working great now. The only thing I did was take the coil cover off and scrub the coil off. Dont know if that is what fixed it but it is working great right now.
That's great, I may pick that one up soon, nice to have 2, GJ on the vids there great, TY for the info.
6:45 alright!!!
I was excited to see the first Equinox test including a gold nugget as a target - but you didn't use prospecting mode on it. I hope you redo the test.
I was using all the manufactures standard modes so not to give one an advantage but yes in the gold mode the equinox would have rocked it!
the deus has goldfield mode too so would also be nice to see what that did with the nugget
Nice comparison. Good video thank you
Great test!
what mode were you using the AT Pro in?
unfair test the Deus is only in Basic one which is very tame wheras the Equiniox is in Field mode which is a more powerful setting to be fair the Equinox should be in Park mode
TheSanjurok easy to see where your loyalty lies .
Don’t cry because you own the inferior detector
@@W3TFART Nice try of diversion ! Lol you didn't speak of the Equinox 800 advertiser making the test ... strange.
Fab Del sound like another butt hurt dues fanboy
@@W3TFART yes you are
Ticky Tocky blame Apple for its autocorrect you silly bitch
There is one thing that you do not disclose on your video. When you got the hit with the XP Deus were you running with the VLF frequency or with the HF frequency which reads metal at a deeper location.
you should have stuck the excal. in the mix.......does good in the dirt also....surprises many - great vid steve.....now when you go out with beaver things will be more equal.....our guy says maybe mid week on some of our 8 box's....good luck