@@mikeinvegas1 that's not always true... though... some people either don't like doing stuff themselves or don't have the know how and would rather pay someone else to do it or have one already built.
I like the thick wires. Where do i get those.? What brand etc? Do i need a special motor mount for that motor? And i see your esc mounts in middle. How do i do that? Isnt there a brace going from front to back?
The thick wires come with the castle XLX esc... you don't need a special mount for the motor but you have to flip the stock mount around to the other side...I removed my center brace so that I could put my esc in the middle...I sell a carbon fiber mounting kit for esc on Ebay but you can't run the brace with it...I don't run the brace because if you crash at high speed that brace is not gonna keep the car from getting destroyed lol
@@dfresh2776 lol..i agree🤣🤣 i dont want to bach mine. Just safe speed runs. I take car of my cars. I have 3 shelf queens that were very expensive. will play with them eventually. This i plan on using. How can i pay u for alittle help. Through paypal?
Not to be rude but if your goin to give advise especially about the rc hobby which some of us are extremely passionate about make sure your giving out the proper information. The B-Link links to all of the Castle esc's that are data logged equipped. Nice build by the way....
Bedt looking one I've seen! Beautiful! I've just come across this car in utube I'm looking to build one. How to build ine like yours start to finish. Car etc a to z. Thank u
Thank you man I appreciate it...a lot of hard work and money went into this car....I also designed a custom full carbon fiber kit for it that I sell... you should check out my other videos the kit came out amazing! Carbon front splitter carbon wing mounts carbon wing and carbon rear fins
@@mikeinvegas1 I'm running a castle XLX esc with a tp power 4070cm 2200kv on 8s... my servo is a protek 170sbl high torque high speed servo... I'm running 2 4s gens ace high voltage race series batteries. My transmitter is a spectrum dx4s with a range extender. I use the castle b link to tune the car right from my phone when I'm doing runs... it's a pretty sweet setup... yeah I'm somewhere in the 1200 to 1400 range if you include the carbon kit and the 2 GPSs on board.
Forgive me the Bluetooth mod , the esc plugs into it then into reciver and you can run the car with it in all the time , thanks . I brought a b link Y adaptor and can’t work it out . What’s your thoughts
Castle says not to have the aux plug plugged in when connecting the xlx for changing settings. and also in the b-link when you change the power limiting to 400a it goes back to 200a when you log out
Hello... yes aux wire is plugged into the receiver with the b-link... but it does not need to be plugged if your not using aux for anything on your transmitter... but if it is plugged in the b-link will allow you to choose what the aux can be used for
It is all controlled automatically because my fans are plugged into my receiver... so when I adjust the bec voltage from the esc from the app it increases the voltage in the receiver which then sends more power to the fans. Hope that helped.
I don't think it gives a specific number to choose but it gives you options of like high low and medium something to that effect.. and I think high is full power
Love your build man! Car looks amazing! Had a question, if I have an xlx and get the b link adapter will that eliminate the need for an external bec (as long as my reciever and servo are the correct voltage) To run a servo and fans and whatever else at a higher voltage as you showed in the video?
Thanks bro I appreciate it... in a sense yes... because now you will be able to tell the xlx how many volts you want going to your receiver.. especially for those of us running high power servos you'll be able to feed them more power.... some people still run external bec because they say it's takes away strain from the esc but I've been running this setup for a year or two from my xo1 to my limitless with no issues or need for external bec
thank you i appreciate it! You cannot view the data logging just yet from my understanding... but honestly don't let that hold you back because all the benefits you have with settings on the go far outweigh not having it... when data logging is finally released that will just be a nice bonus!!
Great video.. I just made one today on mine. Check question how do you keep your amps set. Amp setting keep going back to 200amps. I want it to stay @ 350. Thank you
Anybody need Arrma , HPI, or Traxxas custom Aluminum upgrades. Wheelie bars, front and rear wings, motor mounts that fit TP power and up to 46 teeth pinions. Limitless rear wings, front wings, wheelie bar for the Limitless and the Infraction Bolts directly on
Bro ty so much bro this video is 🔥🔥🔥
Thank you bro I appreciate it.
That's some fancy shit bro. Bad ass.
Thanks brotha I appreciate it!
I see the car is now on eBay
Yeah man i literally ran the car like 3 times since I got it
D Fresh I saw it and was like hey! I know that car!! Lol
Good information
Thanks man I appreciate it hopefully helps some people out!
D Fresh I’m sure it will
Thanks for the information about leaving the link in the receiver box of the limitless, cause I didn’t think of that.
No problem bro let me know if you ever have any questions!
Beautiful build she’s gorgeous 🤙🏼
Try the max amps batteries!! Exclusive Red!!! Good job!
thanks man i appreciate it!!I'm sure max amps are great batteries heard a lot of good things but they are a little overpriced in my opinion.
@@dfresh2776
You right but... there is truly 39mins of full speed! Check out the "Vorza in traffic"on TH-cam!
@@ianf1297 man that's crazy bro!! Haha I've always wanted to do that! Lol
Thank’s for video!!! The red look’s sweet.....
No problem hopefully it helped!
I just replaced a maxx 5esc 8s water proof off/on switch work great and no sparks when plugging.
Mine doesn't play that tune when I make a change. But the changes do stick. What am I doing wrong??
Your Dog is awesome hahahaha Great video man subbed to ya!
Thank you bud I appreciate it hopefully some of my vids help you out!
I would run this on most my setups but i choose to run telemetry instead and unfortunately b-link wont run next to telemetry.
I have this on my infraction love it make shit super easy no body removal necessary
If you do have a laptop can you use b link instead laptop
sorry i remember u said around 1400.00 ;)
Mine might be for sale for the right price!! Haha
@@dfresh2776 i would but as you know in rc you dont get what you put into it.
@@mikeinvegas1 that's not always true... though... some people either don't like doing stuff themselves or don't have the know how and would rather pay someone else to do it or have one already built.
Thanks for the good information I have a xlx esc on the way I'll definitely be buying this bluetooth 👍🏾
No problem bro! Best investment to make if your running xlx!!
U can use this on every castle esc from the sw4 on up. I have sw4 and mamba x and they can use it.
But lxl not water prof
I'm not too worried about that I don't drive my car in water lol
I like the thick wires. Where do i get those.? What brand etc? Do i need a special motor mount for that motor? And i see your esc mounts in middle. How do i do that? Isnt there a brace going from front to back?
The thick wires come with the castle XLX esc... you don't need a special mount for the motor but you have to flip the stock mount around to the other side...I removed my center brace so that I could put my esc in the middle...I sell a carbon fiber mounting kit for esc on Ebay but you can't run the brace with it...I don't run the brace because if you crash at high speed that brace is not gonna keep the car from getting destroyed lol
@@dfresh2776 lol..i agree🤣🤣 i dont want to bach mine. Just safe speed runs. I take car of my cars. I have 3 shelf queens that were very expensive. will play with them eventually. This i plan on using. How can i pay u for alittle help. Through paypal?
Not to be rude but if your goin to give advise especially about the rc hobby which some of us are extremely passionate about make sure your giving out the proper information. The B-Link links to all of the Castle esc's that are data logged equipped. Nice build by the way....
Nice setup bro! I got the same motor and setup in a Typhon XL I built!
My xlx mamba just died after 3 years, now replacing to 8s max 5 water proof
You should check out the new mamba x 8s that came out.... I've been hearing good things
Bedt looking one I've seen! Beautiful! I've just come across this car in utube I'm looking to build one. How to build ine like yours start to finish. Car etc a to z.
Thank u
Thank you man I appreciate it...a lot of hard work and money went into this car....I also designed a custom full carbon fiber kit for it that I sell... you should check out my other videos the kit came out amazing! Carbon front splitter carbon wing mounts carbon wing and carbon rear fins
@@dfresh2776 yeah i seen other videos. Your custom carbon kits are nice. Do u think u have around 1200.00 into car?
What motor are u using and other electronics?
I would diffenitly be buy your carbon kit when i get one.
@@mikeinvegas1 I'm running a castle XLX esc with a tp power 4070cm 2200kv on 8s... my servo is a protek 170sbl high torque high speed servo... I'm running 2 4s gens ace high voltage race series batteries. My transmitter is a spectrum dx4s with a range extender. I use the castle b link to tune the car right from my phone when I'm doing runs... it's a pretty sweet setup... yeah I'm somewhere in the 1200 to 1400 range if you include the carbon kit and the 2 GPSs on board.
@@dfresh2776 thank u. Awesome
💪🏽🏆👍🏽
Top stuff can’t wait to tell my mate what he suggested was a great idea , this app is quality
Forgive me the Bluetooth mod , the esc plugs into it then into reciver and you can run the car with it in all the time , thanks .
I brought a b link Y adaptor and can’t work it out .
What’s your thoughts
Castle says not to have the aux plug plugged in when connecting the xlx for changing settings. and also in the b-link when you change the power limiting to 400a it goes back to 200a when you log out
What u run for a receiver
mine keeps locking up when sending
Is your auxiliary plugged into your receiver when you b link is plugged in too??
Hello... yes aux wire is plugged into the receiver with the b-link... but it does not need to be plugged if your not using aux for anything on your transmitter... but if it is plugged in the b-link will allow you to choose what the aux can be used for
Cool , about time Castle fixed the app.
Subbed you 👍🏻
Nice video what kind of GPS is that
Thanks man it's the Garmin foretrex 601
Works for my Mamba Monster X!!
I'm waiting for my can you tell me how do you have your fans hookup to so the app can Control it
It is all controlled automatically because my fans are plugged into my receiver... so when I adjust the bec voltage from the esc from the app it increases the voltage in the receiver which then sends more power to the fans. Hope that helped.
@@dfresh2776 thanks for the information that's help a lot
@@deenice48 no problem!!
Can you update the current limiting from the phone?
Yes sir!
@@dfresh2776 everytime i do current limiting it dosent stay keeps going back to 200a
What u using for a receiver
Is there a way to put 400 amps using the link , instead of using the computer , I didn't see it through the app
What parts did you use to build and what motor you running I like the way your setup looks
Can you take the current limiter up to 400 with the b link
I don't think it gives a specific number to choose but it gives you options of like high low and medium something to that effect.. and I think high is full power
makes me want one of those so i can stare at it. lol sooo nice.. alot of pride went into that.. i muight do that during this coronavirus time;)
Love your build man! Car looks amazing! Had a question, if I have an xlx and get the b link adapter will that eliminate the need for an external bec (as long as my reciever and servo are the correct voltage) To run a servo and fans and whatever else at a higher voltage as you showed in the video?
Thanks bro I appreciate it... in a sense yes... because now you will be able to tell the xlx how many volts you want going to your receiver.. especially for those of us running high power servos you'll be able to feed them more power.... some people still run external bec because they say it's takes away strain from the esc but I've been running this setup for a year or two from my xo1 to my limitless with no issues or need for external bec
D Fresh awesome! Thanks for the reply and info! I really appreciate it man!
@@NotSoJDM18 no problem bud if you ever have any other questions feel free to reach out
D Fresh cool thanks man!
How's the Garmin 601 working for you?
I haven't even run yet since I got it bro... I'll have to update you once I run it hopefully this weekend. But so far its bad ass just to look at lol
Can you view the data logging yet? That has been holding me back. Sweet car.
thank you i appreciate it! You cannot view the data logging just yet from my understanding... but honestly don't let that hold you back because all the benefits you have with settings on the go far outweigh not having it... when data logging is finally released that will just be a nice bonus!!
Nice build bro. What car stand is that?
Thanks man it's actually a custom stand that a friend of mine made
Looks great, did you test it on your Android phone?
I did works on my android as well!
@@dfresh2776 okay thanks 👍
Awesome bro.does this work with a mamba monster 2 esc?
Great video.. I just made one today on mine. Check question how do you keep your amps set. Amp setting keep going back to 200amps. I want it to stay @ 350. Thank you
I think if you use computer instead of the phone app you will have more options to set your amps
I’m running my infraction like this
Anybody need Arrma , HPI, or Traxxas custom Aluminum upgrades. Wheelie bars, front and rear wings, motor mounts that fit TP power and up to 46 teeth pinions.
Limitless rear wings, front wings, wheelie bar for the Limitless and the Infraction
Bolts directly on
Why can you get or make them?
@@armenvegas
We make them
Checkout website at rcspeedmonsters.com for all your Arrma upgrades including the Limitless and Infraction
Can you do a vid doing a motor torque test ! Tia
Everyone has the xlx castle,someone needs to come out with something new,it's not even cool or different,everyone and everycar has one,it's crazy
If it ain't broke dont fix it lol
Motor timing is key 🔑 cheat
Can u list the parts u used in your build?:) your car looks to have alot more going on then other ones of this model.
This fisheye😂
Uhh