Edge Banding Plywood
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- Edge banding plywood is a simple but very effective way to finish the raw edges of any plywood project. In today's video I'll cover the basics which includes tools, techniques, and advice. If you have questions or would like to share photos of your work with me, email them to josh@traininghandsacademy.com
Amazon Affiliate Links to Tools I Like and Use (THANK YOU for supporting THA!)
HAND TOOLS:
Edge Banding (Birch): amzn.to/2AlkbEg
Edge Banding Trimmer: amzn.to/2X35jpO
Band-it Trimmer: amzn.to/2XAHPEU
Tail Trimmer: amzn.to/2Xc380B
Edge Banding Iron: amzn.to/2AeqJEQ
Combination Square: amzn.to/2X79Cgb
Kreg Jig: amzn.to/2KLPvxY
Speed Square: amzn.to/31fv02z
End Cutting Pliers (they don't sell mine anymore): amzn.to/31hq1yt
Estwing Hammer: amzn.to/2VVnHMr
Chisel Set: amzn.to/2BjHH1H
Nail Set: amzn.to/2BdxCU4
Pry Bar Scraper (better then mine): amzn.to/2oGhKXu
Tape Measure: amzn.to/32gdEUt
15-Inch Utility Pry Bar: amzn.to/2IPlHQs
Level Set: amzn.to/33C56rD
POWER TOOLS:
Drill Combo Set: amzn.to/2nDsqFV
Jigsaw: amzn.to/2AGpGua
Porter Cable Belt Sander: amzn.to/38D3kJe
Circular Saw: amzn.to/2Pvto2C
D-Handle Router: amzn.to/2ol4mYx
Small Router: amzn.to/2nEjDUe
Plunge Router: amzn.to/2LK29yQ
----------------------------------------------------
Follow me on:
INSTAGRAM: / traininghandsacademy
FACEBOOK : / traininghandsacademy
My name is Josh Fedorka, and I’m the founder of Training Hands Academy™. I have been a carpenter and woodworker for over 25 years. I have also held certifications in home energy auditing and have built several LEED certified homes in New England.
God has gifted me with many “hands on” skills and it is my calling and purpose to share those skills by teaching others. Whether it is to seek a career in carpentry, become a general contractor or improve one’s DIY skills and knowledge, the motivation behind THA is to help others successfully learn how to work with their hands.
#edgebandingplywood #beginner #DIY
![[LIVE] : ONE ลุมพินี 72 วันนี้!! คู่เอก "ก้องศึก vs โจอาคิม"](http://i.ytimg.com/vi/hT1EOSsRPac/mqdefault.jpg)
This is one of the quickest, most thorough videos I have ever watched. Well done!
Much appreciated! If you want to support my work, please drop some more comments on my other videos! This helps to wake up the YT algorithms. :)
You do a really good job editing to be concise and precise. I hope you’re successful enough to keep them coming. Thanks
Much appreciated! If you want to support my work, please drop some more comments on my other videos! This helps to wake up the YT algorithms. :)
I just finished building a home bar and this update popping into my email was exactly what I needed to know to finish it. Thank you!
Great timing! Have fun finishing your project Mr Dunbeck!
This is absolutely all I needed to make a purchase to get my project done. thanks for this informative video.
Massive thanks for making this video sir! It help us a lot. Keep safe always!.....
Thank you.
You explain it so well..
All these videos are great - thanks for sharing your knowledge with the world. People like you make this site incredible!
Glad you like them!
Hey man thanks so much for explaining this.. I’m building a computer desk and I have just finally built my first round edge jig.. took a few try’s.. next I want to edge ban everything and then I should be good. Was confused with this stuff but thanks.
Thanks for sharing, this video was very helpful!
I just got into woodworking and only use plywood since I don’t know what I’m doing and don’t want to waste money on “good wood”. I’ve seen other videos where people use edge banding but no one ever explains anything about it. This video is awesome! Now I know what to buy and exactly how to use it! Thanks so much for sharing your expertise. You have a new subscriber!
Awesome! Welcome aboard D. M. R.
Solid video as always!
Clear, concise and showing some ways to fail and how to recover, great stuff!
Glad it was helpful!
V
Great video: informative and to the point!!
Another great video. Straight to the point, informative and professional. Best wishes from Brazil.
Thanks Vicente!
Thanks a lot for demonstrating the process in detail. Best regards
Glad you found it helpful.
Awesome tips...loved it❤
Thank you for your great vid tutorials. I like them so much.
You're very welcome! Thank you for the gift! 🙏
Great video! Keep them coming
*Thank You!* I could not figure out how to properly use the double sided trimming tool (the end trimmer was just so simple to use by comparison). Now I have a place to start and I appreciate your video and instructions very much. Thank you again. 👍👍
Glad I could help!
Nice and informative as always!
Thanks buddy!
Great video! Thanks!
Wow..that how they do it...yeah...thank u sir
I have the squeezee type of trimmer, but never knew it has bevel adjustments. Thanks.
Fantastic
Thank you so much
This is one of the best videos on this process, for sure. New to this and already installed some on the particle board I’m working with and although I like it the job could’ve been better. This explained everything I goofed on and is definitely gonna help me out a lot. Thanks!
Glad it was helpful!
Excellent tutorial brother. Learned a lot. These instructional videos really nail down (no pun intended 😀) the basics are give the user greater confidence. Really appreciate these videos .
I'm so glad they are helpful for you! If you want to continue to support my work, please drop some more comments on my other videos. This helps to wake up the YT algorithms. :)
So cool!
Thank you 👍
You could use a router bit flush cut. But better is a regular file to take care of the overhand and bevel.
I've just got the double sided cutter from Temu (£6.27) but as usual it didn't come with any instructions so this video was very useful. Thanks very much
Glad I could help
Brilliant explained
Glad you liked it.
Well presented!!
Thank you!
perfect video demo👍🙏
Thanks for the visit
awesome video
very good video,well done
Thank you! Cheers!
I never tried glue on edge banding. I have glued solid wood to plywood to hide the edge. Thanks for the video.
Great video cheers
Thanks 👍
Great as always
Thanks buddy! Send more pictures my way if you want... I really enjoyed seeing what you did and the tools you used!
Thank you sir! Just made a 3” mdf work bench. Unfortunately I only have a hodge podge which includes a 6” pony vise which I have to figure out how to attach so I can plan some dog holes. It should be....interesting lol
Very cool man!! Exciting!
Awesome video! Tips here that I will definitely use (sides first) as I'm building a desk topped with 3/4" Birch plywood. I knew enough to buy the banding, but was a bit unsure about the best application.
Question: if I bevel the edge by 15 degrees to match the legs, will edge banding be more difficult to apply?
Application no, trimming maybe a little. I would try it on a scrap piece before doing it on the real thing. Let me know how it goes.
very nice
What should I do if I’m edge banding a piece with rounded corners to avoid a seam showing?
Thank you, so much. ❤ 🇮🇳
My pleasure!
Hi..l like ur presentation...it was very simple to understand..u made it sound so easy...l would like to ask u few questions ...other than the aesthetics ...why do we need to edge band? Does it make the plywood last longer ? Does it prevent water entering the plywood core ? Is it necessary to edge band the sides that we don't see? Please do enlighten me. Thanks in advance.
Edge banding is used both to protect and finish off the edge of the raw plywood. I wouldn't say it makes the plywood last long, but does prevent contaminants like water/moisture from entering. In general I do not finish the edges that are not visible. Bottom line, it's done mostly for aesthetic. Hope that helps.
Please how can get one of the edge trimmers?
I am in Ghana
Who is must required in wodworking, bosch GSR or bosch GSB?
Thanks for the video! Really easy to understand. 👍 one question, does the dual edge trimmer work on 2mm edge banding? Some of my projects require 1 and 2mm. just need to know if it works for both thickness.
I've never cut 2mm banding with mine. However, I just measured the cutter and it looks like it can handle 2mm (that is really close to the max). Just double check before you buy the trimmer of your choice
Found the spring trimmer would not cut. I ended up using a sharp chisel instead. Filing is another good option.
Hi, does the banding have to colour match the wood if I’m planning on staining it all?
Thanks
I haven’t had good luck with the dual sided edge trimmer. 😩
Can that blue trimmer cut 2 inch band?
Thanks..
Can we stain/varnish/lacquer on the edge band after "installing" it?
Absolutely!
Do you do decks or pergolas? Would like to see a video on that.
At some point I will... thanks for asking.
Nice demonstration. One question. How do you trim the banding when you are working on plywood that is already installed. I have cabinets I am redoing and the fronts of the shelves need banding. I can't start at an edge because there are vertical pieces of wood in the way.
Great question! I use a straight blade (or utility blade) and hold it flush with the top or bottom of the shelf to cut the excess material off closest to where the shelf intersects the side of the cabinet. I cut just enough material off to get my trimmer in there to finish trimming the remaining material. After that I use some fine sandpaper to polish the edges. Hope that make sense, if not hit me up on IG where we can chat and share pictures.
@@TrainingHandsAcademy Thanks for the reply. I'll give it a try.
what if you're working on a project to to wide to use the double sided trimmer, what do you use then since the single edge trimmer doesn't come out as clean?
Hey Paul. I would use a single sided trimmer (or take the double sided one apart and use half of it) and then use a little sandpaper to clean it up.
Hi - I have a question. Di you say that its best to veneer the side of the board first and then apply the veneer edge so there is no gaps in the seams at the edge?
Yes, sides first, and then the face (the side you will see most).
Can I use the blue edge trimmer for a 1/2 inch wood
Not sure... I'd double check with the manufacturer. My guess though would be yes.
For the blue edge banding trimmer, can you adjust the width?
Yes
When building drawers out of plywood, how do you do the 90 degree corners (looking down at the top of the drawer? Thanks
I do the front and the back first, and then the sides.They end up looking like a stile and rail door, if that makes sense?
@@TrainingHandsAcademy Thank you for the response, good idea!
Can you edge band on corners that are round?
Yes
Josh. Do you have any experience with this edge banding on particle board edges?
I've used it on melamine plywood which has a particle board core. I don't think it would work good on just regular particle board.
@@TrainingHandsAcademy Tks!
Do they have one for laminate?!
What type of laminate are you referring to Payden?
Can i still paint over it? Like lets say white
Yes
A bunch of other TH-camrs recommend using just razor blades, foregoing trimmer tools altogether.
You can... but it can be hard to keep a nice uniform clean cut. Give it a go and see how you like it.
Can I use a heat gun
Yes, and a J-roller
Fine grit sandpaper means howmuch grit?
220 and above
@@TrainingHandsAcademy okay brother. Thank you so much for replying.
My issue with the purpose-made edge banding irons is that they are stupidly expensive. It's just a heating element with a handle. Why so pricey? You can buy a brand new clothing iron for as little as 1/4 the price - Amazon has one for 14 bucks, for instance.
I was fortunate in that I already own a heat gun for electronics. That worked fine. I just worked in 6 or 7 inch sections and followed up immediately with a roller.
My project was a little different from yours. It was a 28-inch square base for a turntable. I radiused the corners, so I didn't have a sharp corner to start from. I just started in the middle of the back edge and went clear around the entire panel. Used nearly 10 feet of birch edge banding. When I got back to the starting point, before heating the ends, I overlapped them and trimmed both ends at the same time with a mallet thump on my 1-inch chisel. A little TimberMate filled the tiny gap.
I'm really happy with how it came out, especially since I'm a newbie woodworker.
I guess since I was looking for an edge banding iron via Google, they added this video to my recommendations. A day late unfortunately. But I still enjoyed it.
Thanks for all your informative content.
Hmm looks like the said trimmer is unavailable. Any other suggestions. Very nice video btw. No BS just information.
amzn.to/2X35jpO
सर हैंड टाइमर मशीन चाहिए आप अपना नंबर भेज दीजिए प्राइस कितना होगा सर
I watched hoping to find out what temp to set the iron to. I was disappointed. Much other good info.
I put my on high... never had a problem with burning. Hope that helps.
Dude stop yelling
Hi
I have issues with order of operations with my wood working projects
Do you do this after you have sanded the main face or after ?
Thank you
Great question! I would do this after you have done your main sanding. You will then want to follow up after you have edged it with a fine 220 grit to clean everthing up.
Hi, does the banding have to colour match the wood if I’m planning on staining it all?
Thanks
Yes you can get different species of wood
@@TrainingHandsAcademy thanks for the reply.
I’ve been finding it hard to match the banding to the colour of the plywood.
Do you have a local woodworking store?
@@user-mb6jz1el6v