On Amazon: *GIMBAL RIBBON CABLE: amzn.to/2PeCKl5 *PRECISION DRIVER KIT: amzn.to/3sJYCDB (Need 1.5mm allen and phillips) ~Longer Video I was Referring to: th-cam.com/video/zp8v7ePbZCY/w-d-xo.html
I've seen many Mavic disassembly videos and yours is the only one that points out that the 2 small plates underneath having smaller screws on the outside plate. Good job!
Thanks for this video. I used it on conjunction with a more detailed explanation (not the one you linked, another one I found) but yours was easier to follow for getting at the ribbon. Bit fiddley in places (the yaw connector and folding took me ages!!) and I had a minor panic when the camera seemed to now work after re-assembly (my manual camera settings meant the shot was so underexposed it looked like a black screen!) but all worth 2-3 hours of work 🙂
Thank you so much for this video. I was able to fix my drone even if all this seems overwhelming. DJI charge 100 dollar/ hour and i was able to this myself. It cost me 10 dollar for a ribbon cable from aliexpress and 1.5 hour of time
very discriptive and detailing video. I managed to replace cable. After repair, no more error showing on controller, however left control wheel on remote does not respond to camera, which means camera only stays in front position - stand still......any advise TIA
Bought second hand as it was stated only cable needed replacing. Replaced it, now compass 1 is down, calibration doesn't work. Any idea's why ans how to fix. Many thanks for this tutorial. Liked and subbed!
Great video. Can you answer this? I have a mavic pro with a gimbal issue. Video feed is fine. I suspect it’s a ribbon cable problem . While I wait to do the repair can I disconnect the gimbal power and still have camera transmission? How would I do that ?
I just followed this video to replace my gimbal cable. It all seemed easy to follow. Only now, the startup sequence seems wrong, and the gimbal overload error is still present. Do you have any idea what it could be? Here's a video of the startup sequence: th-cam.com/video/3036_ttbzvw/w-d-xo.html
On Amazon:
*GIMBAL RIBBON CABLE: amzn.to/2PeCKl5
*PRECISION DRIVER KIT: amzn.to/3sJYCDB (Need 1.5mm allen and phillips)
~Longer Video I was Referring to: th-cam.com/video/zp8v7ePbZCY/w-d-xo.html
I've seen many Mavic disassembly videos and yours is the only one that points out that the 2 small plates underneath having smaller screws on the outside plate. Good job!
Hey, thanks for the great video. I used it to fix a broken gimbal mount and flex cable after a tree crash. you made it approachable and fun
Thanks for this video. I used it on conjunction with a more detailed explanation (not the one you linked, another one I found) but yours was easier to follow for getting at the ribbon. Bit fiddley in places (the yaw connector and folding took me ages!!) and I had a minor panic when the camera seemed to now work after re-assembly (my manual camera settings meant the shot was so underexposed it looked like a black screen!) but all worth 2-3 hours of work 🙂
Thank you so much for this video. I was able to fix my drone even if all this seems overwhelming. DJI charge 100 dollar/ hour and i was able to this myself. It cost me 10 dollar for a ribbon cable from aliexpress and 1.5 hour of time
Hi bro
Please how can I get gimbal ribbon cable for faith 2 Se drone
Just followed your video to fix my mavic good job thks
a little late to this but any insight on what silicon to use or if it’s really necessary
very discriptive and detailing video. I managed to replace cable. After repair, no more error showing on controller, however left control wheel on remote does not respond to camera, which means camera only stays in front position - stand still......any advise TIA
I had the same thing happened to me earlier last year when mine ran into a tree. That replacement of the ribbon cable isn't too bad
Thx for the upload
Hi bro. I have same but no video picture come to the mobile, ist need to calibration first and signal will comes ?
Bought second hand as it was stated only cable needed replacing. Replaced it, now compass 1 is down, calibration doesn't work. Any idea's why ans how to fix. Many thanks for this tutorial. Liked and subbed!
Thank you for this bro! same thing happened to me.
Dude. Get a pop filter. Great guide, but now I need to repair my speakers 😜
Great video. Can you answer this? I have a mavic pro with a gimbal issue. Video feed is fine. I suspect it’s a ribbon cable problem . While I wait to do the repair can I disconnect the gimbal power and still have camera transmission? How would I do that ?
Thanks. And I'm not sure on that one honestly
I replaced the gimble with overload now my camera stopped working, checked the connections but fear the camera cable was only barely working
Why don’t you have camera feed ?
Nice fix 👍
Thanks my man. It was a PITA to route that tiny cable.
What went wrong is you broke it 😂 but you called a good fix 😊
I've replaced the gimbal cable and now I have no more video feed and the gimbal violently tries to calibrate and doesn't work. What can I do? Thanks!
Did you ever figure it out?
@@glitchhin332 Sent it off to a certified technician and even he could not figure it out. It was replaced by DJI in the end.
Unfortunately I did it today, I just ordered a cable from China .. I hope to replace it successfully
Yeah it's not too bad a task especially if you have steady hands
@@NoNonsenseKnowHow I'm not famous for my craftsmanship... :D
Me neither! Just take your time with it and you should be good. Maybe order two ribbons in case you mess the first one up. They are cheap
I just followed this video to replace my gimbal cable. It all seemed easy to follow. Only now, the startup sequence seems wrong, and the gimbal overload error is still present. Do you have any idea what it could be? Here's a video of the startup sequence: th-cam.com/video/3036_ttbzvw/w-d-xo.html
How in the hell is this a video of replaceing the cable you showed a video of common sense take the screws out
?
What?