❌ never make mistakes when using an electric angle grinder
ฝัง
- เผยแพร่เมื่อ 17 ก.พ. 2023
- Never make mistakes when using an electric angle grinder.
The electric angle grinder is an essential tool for many types of jobs, it is used for cutting, grinding, sanding and many other functions. however, at the same time that it is very useful for the most varied types of work, the electric angle grinder is also a very dangerous piece of equipmen however we must be attentive when using an electric angle grinder. Wear all personal protective equipment and always properly maintain all angle grinder parts before using an angle grinder. In this tutorial I go over a little of what we should and shouldn't do when working with an angle grinder. If you liked the video, don't forget to leave a like and subscribe to the channel to always stay on top of all the news.
#caldeireiro #grinder #anglegrinder #welding #grinderwelding #boilermaking #caldeireirowelding #welder
![🔴 [TRỰC TIẾP] HCĐG LÀO CAI - U20 THÁI LAN | Cúp VTV9 - Bình Điền 2024| JET STUDIO](http://i.ytimg.com/vi/nXSwoEuqsFM/mqdefault.jpg)
✅how to install hinge 👉🏼th-cam.com/video/opsrHdZ7j7I/w-d-xo.html
✅🚀 Watch this amazing video 👉🏼th-cam.com/video/MMBRjk9MotU/w-d-xo.html
Yo tengo la misma amoladora MAKITA...La mejor!
Instead of having background music, why not explain what you're doing?
Because it's youtube, so there HAS to be music, no matter what, apparently. Also, so the music will become extra annoying when you watch at faster playback speeds.
@@grantm6514 true😄
The video is not about angle grinder safety, it's about revenue. Unfortunately by commenting we are assisting in it's proliferation.
Why don't you watch and pay attention. Talking will not make it clearer. It's already clear.
Attitude!
No mention of unplugging the grinder before changing a disc.
I was thinking the same shit that’s the best way to lose a finger
@@2035jimabsolutely - safety first - always !
The best video i have found to teach me how to use an angle grinder correctly for the first time! Thanks! 😊
🤠🙏🙏🔥🚀🚀
Good teaching. I learned a lot before using my grinder for the first time.❤❤❤
👏👏🤠🙏🙏
Demonstrator has violated the golden rule....
Never try to replace discs with the power code is connected...
🙏🙏👍
Ok gracias,; Lo tomaré en cuenta.
Saludos.
Gracias por tu comentario, siempre debemos tomar todas las precauciones al utilizar la amoladora angular eléctrica. Abrazos 😃🙏🙏
Boa tarde
Não é necessário mesmo aberto um pouco o disco quando colocar na máquina?
Lo hiciste sin hablar nada, este es el video que estuve buscando, mil gracias
🙏🙏🎉🎉🚀
MY BIGGER PROBLEM WAS SLOVED THANK YOU
😉🙏🙏🔥🚀
Thanks for the video.
Nel video non ha specificato la cosa più importante, e cioè ogni operazione di posizionamento dei dischi, deve essere eseguita tassativamente con la spina della smerigliatrice staccata dalla presa di corrente.
Excelente trabalho, muito bom
Nice, im a noob when it comes to using grinder.. thanks 👍
I'm confused. Do you or do you not use the spanner wrench to tighten the cutting wheel? If you're not supposed to use it, then why does the manufacturer provide one with the tool? Common sense tells me to push button to lock angle grinder and use spanner wrench provided to tighten cutting wheel to grinder. Am I wrong?
Hand tighten and then give the Cut off disk or abrasive disk a pull to tighten it a bit more and you're good to go.
@@DVSONENL Thanks, when I bought my angle grinder I tried it both ways and they both work fine, but using spanner wrench takes longer.
Don't use the wrench on the flange nut when fitting a cutting or grinding disc. Just snug it by hand. When the grinder spins up the inertia tightens it up. The wrench is supplied so you can loosen the flange nut when you want to remove the disc. If you tighten the flange nut with the wrench it is possible to over-tighten it which can damage the disc imperceptibly leading to failure of the disc. This is one of the reasons a disc can shatter in use. You should never use a disc you don't know the history of, or a disc that has been dropped for the same reason. Discs also have a expiry date printed on them. Don't use them past that date. Expired discs have a greater chance of shattering because the adhesives holding everything together degrade over time. Keep your discs in a dry environment away from humidity. Humidity can cause premature failure of the adhesive and disc failure.
@@andrewcoulter525 Thanks for all the good info
Well I just learned something new from you today and I thank you 🙏
Thanks, I always made mistakes. Now I know what is the correct way.
🤠🚀🙏🙏
merci pour tout ces bons conseils..
🙏🙏🤗
There is an arrow to tell you direction on the machine you muppet
Thanks! Very useful video, Bravo!
😀🙏🙏👏
I've been cut with a couple of times witn an angle grinder. My quick reaction spared me from losing a finger. Also I didn't blend out because the friction from the blade cauterized the cut at the same time.
It really is a very dangerous piece of equipment 🙏⚠️
Excellent, clair, brillant!!Merci...
Excellent advice
🚀🚀🚀🤠🙏🙏
Boa instrução ...
🤠🙏🙏
Very interesting. Waiting for next video
🤠🙏🙏
WE LEARN EVERY DAY. WOW GREAT INFO 👍👍👍👍
🙏🙏🚀🔥
Спасибо за подсказку! Надеюсь, что так на самом деле правильно фиксировать гайкой круги. Я всегда делал наоборот... А вот насчёт того как устанавливать отрезной круг картинкой вниз или вверх не знаешь, кого и слушать. А хотелось бы знать наверняка.
🤠🙏🙏
Para eso es la llave PARA APRETAR
No solo con la mano!
Eso no lo entendí
Para mi no tiene que apretar con la mano
Read the manufacturer's instructions. They explain the correct way to use the tool. As you become more experienced you will see why some of the safety features bare there. I worked with numerous people who were badly hurt because they thought "it would not happen to them." Wen a blade (particularly ultra thin blades) shatters, it can really cause serious damage to you.
The first thing most people do is take off the guard, man do i hate those ultra thin blades. I like the bosch, because you can control the speed of the grinder on some models
@@ronkali5365always leave the guard on. And the 1 mm cut off disks slice through metal like a hot knife through butter.
@@ronkali5365Nejen Bosch !!! U Bosch platíte za jméno... Mám zkušenost například YATO YT-82020 a NEJSEM DEALER!
I found out to my cost how dangerous angle grinders are. I was cutting a plastic sewage pipe with a saw blade on the grinder. It kicked back and the blade went down the middle of my index finger also taking off the tip of another finger. Several years ago I was cutting through a brick, the cutting disk grabbed my teeshirt which wrapped around the blade. I was unable to turn it off and it cut a ten inch gash into my stomach. I can not blame the grinder it was my fault for being so stupid. I respect the angle grinder now and follow all safety rules.
😳🙏🙏🚀🚀🚀
So for years I've been loading my cutoff discs backwards? I've never had problem, is there something I'm missing? I just went up on a Norton Abrasives video on how to load a disc, why are they showing the wrong way? Put this in TH-cam search and see for yourself - How to mount a cutting disc onto an angle grinder correctly. I honestly just want to know which way is correct and why or does it even matter.
Relax, no matter which side. 🙂
I just went and checked my discs as I couldn't make out what it is that he was highlighting and I have no such marking on my discs.
To me it looks like a standards approval stamp, just like all the other markings on his disc. I think he just saw what he believed to be a directional arrow and jumped to the wrong conclusion.
Additionally, it makes no sense that they would be directional as there are no teeth involved, just abrasive particles.
Makes No Sense to make a directional arrow so small everybody will Miss it. Cutting Discs are Not directional. Put them as you Like. I prefer colored Side Up.
thanks a lot
😃🙏🙏
Это надо смотреть "супер умным" для техники безопасности 👍
Jamais trocar os discos de corte com éla ligada na tomada!
👏👏🙏
Muy bien gracias
thank you very much!
Amerzon video thank you so match
😎🙏🙏
Buenos consejos
Muito bom
You can’t say aweseome to your self, when people watch they decide about it not you, 😂.
😃👏👏🙏
No dia que as empresas colocarem o manual junto com o equipamento, muita gente vai conseguir usar com segurança
Uhhh I’m pretty sure they do not sure what the hell u r talking abojt
Tomando la amoladora lo mas atras posible sin obtruir las ranuras de ventilacion se obtiene mayor control sobre ella en el video se ve que practicamente la esta ahorcando con la mano
😃😃🚀🚀
Me parece a mi... a miiiiiiiiiii. Que la llave, Y ES COMO ME ENSEÑARON, sirve para para ajustar y desajustar la tuerca de apriete del disco SEA CUAL SEA. Y QUE NUNCA SE DEBE APRETAR Y DESAPRETAR A MANO, por que un disco de corte puede estar dañado y lastimarte.
Never use a grinder to clean your hands
🙏👍🚀
1 - El sentido de giro de un disco, si es necesario, se indica muy claramente con una flecha GRANDE visible a simple vista con forma CURVA y lo que tú muestras en el video es parte de un logotipo diminuto. Observa un disco de corte de diamante y verás lo que intento decirte.
2 - No te he visto utilizar guantes o gafas de protección.
3 - La máquina incluye una llave para fijar la rosca de apriete que tampoco has usado en ningún momento.
Creo que debes aprender a usar una amoladora correctamente antes de dar consejos a los demás. Un saludo.
@igorshevchuk77, efectivamente amigo este tipo se cree que la llave la trae para hacer bulto
Ótima dica
Que bom que gostou 🤝😎
Wenn ich mir das Gefummel ansehe, bin ich froh dass mein Winkelschleifer mit dem X-Lock System ausgestattet ist. Ich kann mir vorstellen, dass dies eines Tages der Standard sein wird.
🙏🙏🔥🔥🎉
Why did you not use the peg spanner to tighten the outer flange before you ran it up? Contravention of regs right there, not good education, hand tighten is NOT acceptable
thanks buddy, I'll check it out 😃😃
Quer ensinar mas Botou o disco de corte virado!
No se vos pero yo voy a seguir usando la llave para ajustar el disco
Safety first.
Very good
Pues ahora me entero yo que la llave que traen la amoladora angular es solo por gusto o para hacer bulto
Uso la tecla solo para soltar el disco. 😎👍🤝
I've made the mistake of taking the guard off once and the result was 20 stitches and a cast on my arm for 3 weeks.
🙏🙏
Biggest mistake you were doing through the whole video is replacing discs while angle grinder is plugged in.
😉🙏🙏🚀
Você descobriu o mundo
I have cut myself on a tablesaw before, never an Angle grinder. I can imagine the angle grinder would hurt much more as its a burning grind rather than a slicing cut. Can anyone testify?
🙏🙏
Say here’s a thought……. How about creating tools that are safe and appropriate for left and right handers alike? This right handed grinder sucks for left handers. I have other tools that blow saw dust into my vision and eyes not away like right hand action. We left handers should get some sort of credit on the purchase price for having to accept unequal consideration, or at a least “right Handed Version” should be printed on the packaging.
Not enough Southpaws in the population to make it worthwhile for the companies. Sucks, I know, but thats how corporations work.
Dude, rotate the shield and Put the handle in the other side. All anglegrinders are two sided.
This video is funny the first thing you do with a new grinder is to throw away that handle
Při řezání je kotouč vertikálně držadlo také a je to pro praváky nešikovné. Levé předloktí je nad ochranným krytem. Pro broušení je vhodné aby byl kotouč horizontálně a držadlo také, vypínač je nahoře.. Toho lze dosahniut JEN přetočením převodovky proti motoru. Prakticky je potřeba mít dvě úhlové brusky. 👋👋👋🤠👍
❤
🙏🙏
Interruttore, molto duro.
A chave que acompanha não serve pra nada então?
A Chave é usada apenas para soltar a Flange, nunca para apertar. 🤝👍
Nunca usei nem pra uma coisa nem pra outra
good idea
Thank you, watch this other video too 👉🏼 th-cam.com/video/p6gUsg-e1qM/w-d-xo.html
Не въехал, как ставите круг? Знаю по науке, круг ставится мет шайба вниз. За кожух лайк. Тут со своими соратниками бьюсь, что б кожух ставили обязательно. Без кожуха это пижонство. Тем более производительность падает. Искра летит куда попало, плюс все аремя в напряжении.
😃👏👏🙏
Well commented my friend.
thank you my friend 😀🙏🙏
Nunca lo hago ..
😃🙏🙏
Did l miss the part where you mentioned to disconnect electrically when changing the disc?
watch this other video👉🏼th-cam.com/video/3dj9tf4p3j8/w-d-xo.html
Not well thought out at 1:25 you make a cross with your finger indicating that holding over the motor housing is wrong but then make a check mark indicating that it is right .
Creo que no aprendí nada😂
El primer disco de corte está puesto al revés☝🏻
🙏🙏
✅❤️
😃🙏🙏🚀
Ерунда это всё с переворачиванием гайки и отрезного круга по металлу
🙏🙏
Probably the same type of guy that grinds in flip flops
🚀🙏
Esta errado a instalação do🎉 disco, a porca tem que ficar em contato com a parte metalica do disco.
🤠🙏
Narration instead of annoying music would have made this video 1000 times better...
thanks for the suggestion 😃🙏🙏🚀
The guard he is using is for grinding, NOT cutting. There is a different guard for cutting. But even a wrong guard is better than NO guard
Never use the angle grinder without protection 🙏🙏🚀🚀🔥🔥
😮
👍🙏
👍👍👍🙏🙏
😃🙏🙏
Hai scoperto l'acqua calda....😂😂😂😂😂😂
2:44 is actually wrong:) first time was actually correct!!! ALWAYS put metal ring on disk from ginder!! This protect from breaking disk and jaming disk!
👍🙏🙏🚀🚀
Disco não tem lado
its very dangerous because you will not feel any pain till goes to bone
🙏🙏🚀🔥
first mistake for safety change the disc with the grinder disconnected and have safety gloves to start working or continue working
go to use x lock
🙏🙏
कुछ नया बताते कोई एक आध होगा।जिस को पता नहीं। कोई ताज़ा बना मैकेनिक 👍
Thanks for the comment 👍🤝
Cambiare il disco con la spina inserita non mi sembra un ottima idea...
😎🙏🙏
Possibly the worst video I have viewed about angle grinder safety
🙏🙏
Why wasting so much time showing the wrong way first and then the right?????!!!!!!
🙏🙏🚀
🤦♂️
👎por poner música en vez de explicar
I know its not recommended but I run mine without a guard. As long as you keep an eye on the disc and dont get cheap you should be alright. You can also use your grinder to cut about 1 1/2" off the guard making it easier to use one. Again, not recommended but theres just so many things you need to see better while you cut, just keep the grinder angled away from your face while cutting in case the disc blows.
Same! I upholster boat seats for a living, and use the grinder mainly to remove frozen bolts from the wood bases. You can't really do that with the guard on, as it impedes vision and also you can't get into tight spaces sometimes.
Yeah, and when the disc blows you will wish you had the guard.
@@bigmacdaddy1234 That's why you have safety glasses . Wearing safety glasses are a pain in the arse, but....? .
Yeah and when the disc blows to bits and they do occasionally trust me that guard will be all that’s protecting you from serious injury. If it explodes and hits your safety glasses you may get lucky but if it hits your face you are going to have to pray that the plastic surgeon is good.
Angle grinders are one of the most dangerous tools to use. While a circular saw is very similar, the angle grinder spins at a much higher speed, and the physics say that energy increases with the square of the speed. These things can, and will literally take your head off if they get stuck.
Buy vien
👎 cause there's background music instead of giving explations
Video it self is great
Pity for 👎
Sad, this might have been interesting, but being a DUMB (no narration, silent) Video it is useless to me. I task while listening, rarely watch videos.
this video started out ok with putting the nut on correctly for different thicknesses of disc. and ya, you should always use a guard. but then you got muy stupido making up stuff about the direction of a fiber disc. you are using a norton disc. look on their website for a video that tells you the disc orientation is personal preference and makes no safety or functional difference. stop making stuff up in your brain and focus on real safety issues like angle of incidence, rpm's and matching discs to materials
Thank you for your comment, I'm glad you understood the objective of the video, we are just trying to pass on a little of our knowledge, especially for beginners, as the angle grinder is a very dangerous piece of equipment 🙂🙏🙏
M
thank you 👍 watch this other video 👉🏼 th-cam.com/video/p6gUsg-e1qM/w-d-xo.html
confusing video
Хренобень какае-то😊😊😊
🎉😃🙏🙏
Que estupidez las de estos supuestos sabelo todo
many people who are starting, don't know 👍
Cualquier consejo sobre seguridad es siempre muy bienvenido, sobre todo con esta maquina.
Boring!
As you are..