i have the orginal version of this crossbow made an always loved it but was never able to get it to shoot any of the plastic vane bolts, only tpu an id always seen this version on there but never actually wanted to try it til i watched this video. def picking the files up now.
Hi budy, can you post a video how to make that string using latex tube, i tried but could not make it last long more than two shots. can you please make a video of that .
Sure, there’s a couple of bottom rail options that can be used. There’s one mounted in this video th-cam.com/video/Rn8_DEqu6q4/w-d-xo.htmlsi=svZhg4yD7CSqg0Rm
@@juststartsomewhere9089 Hi the magazine will take up to 162mm length bolt so Chinese ones like this that are quoted as 6.3 inch should work fine. www.ebay.com.au/itm/314232461711?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=gubuRXZKRey&sssrc=4429486&ssuid=ZVIGLQWvS82&var=&widget_ver=artemis&media=COPY I’ve tried up to 3090 rubber but I found beyond 3080 while the draw weight increases significantly there are only minor increases in speed with the short draw length being the limiting factor. Best speeds are with the crossbow limbs upgrade! Regards
You can get up to 235 x 235 mm out of Ender 3 Series printer beds. See this article for details on how to adjust in Cura: 3dprinterly.com/how-to-print-use-maximum-build-volume-in-cura/ .Should be able to fit all parts if rotated on an Ender 3 bed.
I've placed samples of the largest files here, if you want to check the size in your slicer: drive.google.com/drive/folders/1_LPTzz5xYEBB_9IsuNaDV9UzrzSCU08U?usp=share_link
@@slingbowmk.l3114 thank you, they do get sliced nicely, i will test print these two parts, if it gets good, then will purchase the full set from the store.
That is totally awesome! I wonder how this video is slip from my radar. I always want to see other RS-X 1911 builds but found nothing, and suddenly this appear on my page just now. By the way is there any advantages for the use of the rollers other than it's tidyness? I think using one rubber will improve accuracy because left and right will be always the sama, what do you think?
Hi Ulung, yes the tubes are neater, I've been making them for a while so I find them easy to construct. In one piece as a loop they are easy to take on and off the bow. Swapping between different strength tubes is quick and simple. The loop passes under the front of the bow with a longer working piece of rubber resulting in a smoother draw pull and more even power release. Currently printing a modified version of the Aderini magazine which will allow me to do something similar with it. Will post a video once complete.
i have the orginal version of this crossbow made an always loved it but was never able to get it to shoot any of the plastic vane bolts, only tpu an id always seen this version on there but never actually wanted to try it til i watched this video. def picking the files up now.
A version that shoots 6~8mm steel balls would be nice, it depends on which file you printed.
And tapered theraband black flatbands in layers and a vertical foregrip to Fascillate cocking.
In addition, you can make a description of the assembly steps and the required bolt and nut models
Hi Vivek available here: drive.google.com/file/d/1N69mXiiGH9Zj3MGpYz33ZEg2otahthZe/view?usp=sharing
That’s legit the goods
Joerg's got a lot to answer for..! 🤣🤣🤣
Onde comprar uma dessa
Pls laugh live Jörk in the end nett time🎉 grate work!
Roller design works great, needs some modifications. I want to meet the builder of these guns. I just got a ringer, but rollers are great underwater.
Happy to hear and ideas!
Hi budy, can you post a video how to make that string using latex tube, i tried but could not make it last long more than two shots. can you please make a video of that .
Video on making tube loops here: th-cam.com/video/f7ZmWEbwIqU/w-d-xo.html
Super cool thanks 👍
Hello may i know the speed and distance for shooting from this pistol crossbow?
And triple layered theraband black blue or gold heavily tapered.then try saxon warbolts
Pease change with the rigid puller
this is sick more vids pls
Onde eu compro uma dessas
Do you sell them?
Berapa harganya sobat, best regard from Indonesia
What's the draw weight and speed ?
Good idea for video, which I’ll post when i get a chance.
Can I buy 1 without having a 3d printer
I just purchased the files. Have you ever mounted any sort of laser sight?
Sure, there’s a couple of bottom rail options that can be used. There’s one mounted in this video th-cam.com/video/Rn8_DEqu6q4/w-d-xo.htmlsi=svZhg4yD7CSqg0Rm
Can the bands be upgraded to stronger ones
Hi it can be setup with either tubes or bands. Best speeds are with crossbow limbs. The draw length is the main limiter.
@slingbowmk.l3114 do you know of a band of broad head that fits. What would you say is the max strength of tubing you could use?
@@juststartsomewhere9089 Hi the magazine will take up to 162mm length bolt so Chinese ones like this that are quoted as 6.3 inch should work fine. www.ebay.com.au/itm/314232461711?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=gubuRXZKRey&sssrc=4429486&ssuid=ZVIGLQWvS82&var=&widget_ver=artemis&media=COPY
I’ve tried up to 3090 rubber but I found beyond 3080 while the draw weight increases significantly there are only minor increases in speed with the short draw length being the limiting factor. Best speeds are with the crossbow limbs upgrade! Regards
Link shoping
Hey hi can we expect a smaller version to be able to print on the ender 3 v2 printers. which has bed size of only 220mm
You can get up to 235 x 235 mm out of Ender 3 Series printer beds. See this article for details on how to adjust in Cura: 3dprinterly.com/how-to-print-use-maximum-build-volume-in-cura/ .Should be able to fit all parts if rotated on an Ender 3 bed.
I've placed samples of the largest files here, if you want to check the size in your slicer: drive.google.com/drive/folders/1_LPTzz5xYEBB_9IsuNaDV9UzrzSCU08U?usp=share_link
@@slingbowmk.l3114 thank you, they do get sliced nicely, i will test print these two parts, if it gets good, then will purchase the full set from the store.
That is totally awesome! I wonder how this video is slip from my radar. I always want to see other RS-X 1911 builds but found nothing, and suddenly this appear on my page just now.
By the way is there any advantages for the use of the rollers other than it's tidyness? I think using one rubber will improve accuracy because left and right will be always the sama, what do you think?
Hi Ulung, yes the tubes are neater, I've been making them for a while so I find them easy to construct. In one piece as a loop they are easy to take on and off the bow. Swapping between different strength tubes is quick and simple. The loop passes under the front of the bow with a longer working piece of rubber resulting in a smoother draw pull and more even power release. Currently printing a modified version of the Aderini magazine which will allow me to do something similar with it. Will post a video once complete.
@@slingbowmk.l3114 Change to an 8mm steel ball version, which automatically resets after pulling the handle. I think this improvement is good!
@Vivek Vs vlog 1 8mm won't do shit 2 any1
can i buy one? i have no 3d printer😂 would you pay via paypal
Make an extended barrel "Suppressor" model design so we can all troll the F.A.T.E (Firearms, Alcohol, Tobacco, Explosives) goonies. 😅😅😅😅
Dude instead using elastics what about co2 power? In a shoting arrow gun like it