Just bought a 2000 ranger and I wanna get the TRQ led headlights. Realized after having it for a bit I noticed I can’t cause the headlights are different shapes. Somehow just got lucky and found a 2001 grille on marketplace. Thank you!
i have a 96 and when i got it the front was already swapped with a lile 2007 front but the bumper was missing so i went and got a bumper and then found out the mounting brackets on the frame are different any ideas on what i should do to make it fit?
Rhere is a few write-ups on the ranger station forums about how to mount a newer bumper to a pre-98 truck. I believe it involves fabricating a plate, or u can cut the mounts off a truck at the junkyard, heard guys swapping sides, driver to passenger and they line up on a 97. Give it a try. Will take some cutting and welding.
Personally, if I were doing a conversion like this on a Ranger I kinda wanna downdate it to the 93-97 appearance. Ive always loved the look of the 2nd gen rangers over the 3rd because my Stepdad had a 1995 Ranger that he purchased from my next door neighbor at the time.
@sbsauto I got a ranger and it was a 2000 and someone has already done this conversion on it. But I don't think he wired it correctly. I had to replace a part insthe turn signal lever. Just to get the brights to work and now that they work, it seems like the turn signals Just get bright when I push it forward and the main headlights get dimmer . When I pull back on it to flash the brights. It seems like the flashers get bright and the regular lights don't dim?. Help. I'm wondering if I use my turn signal with the brights on is it going to blow a fuse or burn wires?
Interesting, sounds like a broken multifunction switch. Or they wired the headlights crossed with the signals. All i did was take the extra running light bulbs and removed them... this caused a "fast flash" so i installed an LED signal relay under the dash to fix the signal speed. If you've already replaced the multiswitch (lever that operates the turn signal and activates brights) then i would look into replacing the 2000 headlight/signal harness and start from scratch.
@irwingrivas541 *breath* A 95 is the same as a 97. If you check out my other videos, i did a complete 97 ranger 5.0 swap. You WILL NEED a complete 96 5.0 explorer donor vehicle. Swap over everything. 1996 EXPLORER 5.0 SPECIFIC. 97-2001 EXPLORER DONOR WILL NOT WORK AFTER 97 RANGER.
@@jahvonhector613 I got the grill and header panel at a junkyard from a 2003 ranger. And the headlights are from walmart online And the LED relay from o'reilly auto parts
Thinking about doing this for my 2000 and do you know if that black piece you trimmed can be taken off of the donor truck and do you have any tips for doing it to do it right the first time?
@@SBS_AutoI went out and bought the header panel grill and all that but I still need headlights which I’m gonna buy new and was wondering if the 2000 and 2001 headlight plugins were the same because I’m gonna get a drl headlight that has its own turn signal and all of that
@ManuelCastillo-rk5ur no, if u took the extra bulbs out, it would flash fast, which is why you would need the led relay. Idk why yours isnt flashing fast if u took your extra ones out 🤷🏾♂️
I have a 1998 and I’ve got the 04+ Hood and an 07 grille on it with the stock headlights , do you know if I will need to change the stock header panel if I wanted to fit 01+ headlights or 04+
I went ahead and changed the header panel because it was damaged. Im pretty sure you need to use a 2001+ header panel for everything to line up though.
This video made me realize I’m missing the center part of my header panel behind the grill for god knows what reason, excellent tutorial too.
@@2H2521 thanks for the kind words!
Looks much better. Good job .
Thanks 👍
Just bought a 2000 ranger and I wanna get the TRQ led headlights. Realized after having it for a bit I noticed I can’t cause the headlights are different shapes. Somehow just got lucky and found a 2001 grille on marketplace. Thank you!
@@alexcaraway6454 do not use LED headlights.
so what’s the list of stuff you had to purchase or get for this swap? i’m thinking about doing it myself! looks great!
2001+ header panel, 2003 grill, bulbs, headlights
Thanks!
And LED signal relay.
@@SBS_Autodid you buy any new hardware/clips ? Or everything from the 2000 fit w the new front end ?
@@ManuelCastillo-rk5ur used clips from whatever came with the 2003 stuff combined with 2000 stuff i had.
@@SBS_Autoappreciate the fast replies man, I’m doing exactly what you did as we speak
nice buddy looking cool
I appreciate it, little by little! I got the 5.0 in the 97 ranger, will be posting the swap video soon. 🤘
i have a 96 and when i got it the front was already swapped with a lile 2007 front but the bumper was missing so i went and got a bumper and then found out the mounting brackets on the frame are different any ideas on what i should do to make it fit?
Rhere is a few write-ups on the ranger station forums about how to mount a newer bumper to a pre-98 truck. I believe it involves fabricating a plate, or u can cut the mounts off a truck at the junkyard, heard guys swapping sides, driver to passenger and they line up on a 97. Give it a try. Will take some cutting and welding.
you by chance have a link for those headlight housings? great video i’ll be using this for my swap.
@swampmoto1413 theyre just off ebay also check walmarts website
Personally, if I were doing a conversion like this on a Ranger I kinda wanna downdate it to the 93-97 appearance. Ive always loved the look of the 2nd gen rangers over the 3rd because my Stepdad had a 1995 Ranger that he purchased from my next door neighbor at the time.
@@kirbyyork7669 i already own a 97
@sbsauto I got a ranger and it was a 2000 and someone has already done this conversion on it. But I don't think he wired it correctly. I had to replace a part insthe turn signal lever. Just to get the brights to work and now that they work, it seems like the turn signals Just get bright when I push it forward and the main headlights get dimmer . When I pull back on it to flash the brights. It seems like the flashers get bright and the regular lights don't dim?. Help. I'm wondering if I use my turn signal with the brights on is it going to blow a fuse or burn wires?
Interesting, sounds like a broken multifunction switch. Or they wired the headlights crossed with the signals.
All i did was take the extra running light bulbs and removed them... this caused a "fast flash" so i installed an LED signal relay under the dash to fix the signal speed.
If you've already replaced the multiswitch (lever that operates the turn signal and activates brights) then i would look into replacing the 2000 headlight/signal harness and start from scratch.
Do you know if you can do this to a 1996? I don’t know if it’s the same difference
@irwingrivas541 *breath*
A 95 is the same as a 97.
If you check out my other videos, i did a complete 97 ranger 5.0 swap.
You WILL NEED a complete 96 5.0 explorer donor vehicle.
Swap over everything.
1996 EXPLORER 5.0 SPECIFIC. 97-2001 EXPLORER DONOR WILL NOT WORK AFTER 97 RANGER.
Where did you buy these parts
@@jahvonhector613 I got the grill and header panel at a junkyard from a 2003 ranger.
And the headlights are from walmart online
And the LED relay from o'reilly auto parts
Thinking about doing this for my 2000 and do you know if that black piece you trimmed can be taken off of the donor truck and do you have any tips for doing it to do it right the first time?
No, sorry i only know how to do it wrong the first time obviously.
🤷🏾♂️
@@SBS_AutoI went out and bought the header panel grill and all that but I still need headlights which I’m gonna buy new and was wondering if the 2000 and 2001 headlight plugins were the same because I’m gonna get a drl headlight that has its own turn signal and all of that
@@panerenwanz36 you can figure it out yourself smartass
Or just watch the video 🤷🏾♂️🤷🏾♂️🤷🏾♂️🤷🏾♂️🤷🏾♂️
Is that the radiator support assembly you swap for the newer year ?
No. Did you watch the video?
Would I be able to use led headlights?
@dopeitshomer absolutely not!
Why would u ever put LED headlights in any vehicle?
Would I need that relay if I’m not converting to LED?
Yes. Because it would flash fast only using 2 of the 4 bulbs.
@@SBS_Autodidn’t end up needing the relay for some reason? Nothing was flashing once everything was installed
@@ManuelCastillo-rk5ur did u leave the extra bulbs in?
@@SBS_Auto took them off, was I supposed to leave them in haha?? Fuck lmao
@ManuelCastillo-rk5ur no, if u took the extra bulbs out, it would flash fast, which is why you would need the led relay.
Idk why yours isnt flashing fast if u took your extra ones out 🤷🏾♂️
I have a 1998 and I’ve got the 04+ Hood and an 07 grille on it with the stock headlights , do you know if I will need to change the stock header panel if I wanted to fit 01+ headlights or 04+
I still have the Stock Headlights and Stock Header Panel from a 1998 just grille and hood has been changed
I went ahead and changed the header panel because it was damaged. Im pretty sure you need to use a 2001+ header panel for everything to line up though.
Very cool. Where did you get the grille and light set?
Car-part.com
And lights from amazon
So it's pretty much just the header panel, grill, headlights/side marker and the matching bumper?
Manja manja manja -James Franco