Vespa 07 GTS 250 fuel pump replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ม.ค. 2025

ความคิดเห็น • 20

  • @stuartralphs1359
    @stuartralphs1359 ปีที่แล้ว

    Nice,easy to follow video.If you've had some experience with modern Vespa's,this make perfect sense.

  • @AnnDee4444
    @AnnDee4444 7 ปีที่แล้ว +5

    I was able to get my tank out without removing the main engine mount bolt or rear tire. Here is what I did with the front of the scooter supported and strapped to a transmission jack:
    1. remove gas filler trim piece (under seat) and top shock bolts
    2. remove exhaust side shock completely
    3. remove exhaust side turn signal & lower plastic trim panel (holds the reflectors on US bikes)
    4. jack up bike as much as possible, taking care to not damage any cables. You may need to undo some clips
    5. unbolt gas tank, and there is BARELY enough room to slide it out

  • @sssgeneral
    @sssgeneral 10 ปีที่แล้ว +1

    great video, can't do the job without bike lift, time to invest this thing, thanks.

  • @nicolasramirez1291
    @nicolasramirez1291 10 ปีที่แล้ว

    it is a great video, but i have to this my self and i need something with more details to see if there is any tricky thing in the business, but still, you give a nice tips of the way to do it. and pretty nice song. Thanks.

    • @artsakakihara5519
      @artsakakihara5519 6 ปีที่แล้ว

      Nicolás Ramírez
      I have to do the same how did yours turn out did you find any good sites

  • @isaaci9211
    @isaaci9211 10 ปีที่แล้ว +1

    My ´10 GTS Super may need a fuel pump change, after 1 hour or so riding and once turned off does´nt turn back on. And I been reading this is a common matter. Any tips are welcome. Thanks great video.

    • @JG-kh8ej
      @JG-kh8ej 5 ปีที่แล้ว

      Isaac I was it hard changing the pump ?

  • @garethkeemore13
    @garethkeemore13 6 ปีที่แล้ว +1

    hi, my 2005 gts 250ie stutters and stalls completely when riding at about 60km/h. it starts up and runs fine again but may or may not stall again sometimes. Any idea why? I am thinking it is the fuel filter?

  • @carynorton
    @carynorton 10 ปีที่แล้ว

    Are you removing the plastic cover where the seat lock and fuel spout is? if so, would you mind explaining how to remove it? I took the hex bolts out but the threaded area of the fuel spout and the rubber ring around it keeps me from getting mine off.

  • @dwaungrant8892
    @dwaungrant8892 10 ปีที่แล้ว

    can you replace the fuel injector to be suitable outside the fuel tank

  • @astrait1028
    @astrait1028 10 ปีที่แล้ว

    How do you take off the two fuel lines connected to the pump??? I can't figure it out!!

  • @SSRT_JubyDuby8742
    @SSRT_JubyDuby8742 4 ปีที่แล้ว +1

    Nice and easy then

  • @kithysmith
    @kithysmith 11 ปีที่แล้ว

    Great Job

  • @dianarosalindland1566
    @dianarosalindland1566 4 ปีที่แล้ว +2

    How about having the camera positioned where you can actually see what you're doing? This was entertaining but not even slightly useful.

  • @Johnmiller_saved_by_Grace
    @Johnmiller_saved_by_Grace 10 ปีที่แล้ว

    Hi I need to remove and replace my gas tank is that the only way to remove it from underneath

  • @artsakakihara5519
    @artsakakihara5519 6 ปีที่แล้ว

    Where can I go to school to learn how to fix Vespa's

    • @pravinovosadjanin
      @pravinovosadjanin 6 ปีที่แล้ว +1

      art sakakihara where are you from contact me on spartan_motors_belgrade on instagram I will tell you all about it

  • @rafbenarbia9850
    @rafbenarbia9850 9 ปีที่แล้ว

    lolll your video just for fun

  • @JG-kh8ej
    @JG-kh8ej 5 ปีที่แล้ว +3

    Literally learned nothing from this video 🤦‍♂️

  • @Maksaccademy
    @Maksaccademy 5 ปีที่แล้ว

    Can't DIY