@@dukeduke7569 haha thanks for the positive comments. Best of luck to you and definitely recommend doing the work yourself , gaining experience and saving money.
Appreciate the positive feedback. Can’t do it with out support from viewers like yourself. Hopefully you learned something from this one and just maybe other vids on this channel with prove themselves useful. And if your satisfied with the help please donate to the hungry mechanics fund on Venmo or cash app @ BKdieseldr Stay safe out there.
great video i am a self trained diesel mechanic never changed a dd15 pump your video make it look like it wont be that diffecult to change it @@bustedknucklebydieseldr3228
In the interest of saving time and money. How much coolant need to be drained before removing the water pump? What size hose do I need for that drain nipple? Thank you
I need to replace my water pump. The black plastic seems to have melted. There is no coolant leak at the moment. How safe am I to drive about 200 miles to the nearest shop?
Is there any way you could make a video showing or explaining how to plumb in an external Davco filter assembly onto a Cascadia that doesn't already have one?
@Busted knuckle by diesel dr how do I plumb it in though? Do I go line from tank to inlet of Davco, outlet of Davco to inlet of oem module, outlet of oem module back to tank?
@Busted knuckle by diesel dr one more thing. Do you have any idea where the Intelligent Powertrain Management Antenna is? I've got a code saying there's a problem with it and it also says I.P.M not active while driving. I'd like to have that for fuel mileage.
@@berniesands6201 that antenna is using the gps antenna which is located in most applications in the sleeper roof above the dome lamp fixture. Above the p/s dome lamp is where most are. Some I’ve found are in the headliner seen once the small compartments are removed.
Great question and thanks for watching. So with that code is it a mechanical defect detected code but you would also need to check the coolant temp sensors to determine if there screwing up and causing the code. Really some t/s would need to be done because it could be the pump , wiring , or sensors. Would hate to lead you in the wrong direction without knowing all the facts. Hope that helps.
Great question man. Yes they are putting out aftertreatment pumps. There’s quite a few manufacturers in the water pump game. I can’t see them being worse than OEM as original ones aren’t great to begin with, they tend to leak like crazy for no reason.
i bought 1/2 engine they give me old style water pump and my old engine has the elctreric one can i use the new one or i have to replace it with electer one
Great question, since your engine ecm is looking for a electronically controlled water pump you would need that version of one. To change that you would need a custom tune to disable that. I imagine the water pump would be the cheaper option.
Well ,,, if there’s nothing wrong with your old one than reuse that. Just new gasket for sure. If there any build up of coolant around the lower section of the pulley than do not reuse.
@@bustedknucklebydieseldr3228 ok mine still good just when they gave me new one i said let me use it better do you think if i take it back they change it with the one i want or not puls i have to change just waterpump not all part that concted with it where you add oil
Haha oh man. This was before the crazy shipping crisis of 2021. Now at days good luck when needing one. I’ve been waiting 6 weeks and counting for one truck.
![[DRIP] ‘Woke Up In Tokyo (RUKA & ASA)’ PREVIEW](http://i.ytimg.com/vi/QN44lcR_VkI/mqdefault.jpg)
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
This is my new project. You have saved me so much money on repairs. Thank you for always replying and posting these videos. God Bless.
Man don’t ever stop doing these videos….im going to start working on my own shit…Whts the worst thing that could happen 😂😂😂😂
@@dukeduke7569 haha thanks for the positive comments. Best of luck to you and definitely recommend doing the work yourself , gaining experience and saving money.
Awesome video! God Bless!
Mount the camera above so we aren’t admiring your shirt sleeve the whole time! 😂
You’re awesome dude….
See this is why I need a camera man. Your hired
Thank you for video..I am about to replace my water pump cascadia 2016 dd15.. I got part from Tolleson $1200 +plus tax. Will return the cord $315 ..
Things are crazy $$ now at days.
Good stuff as always brotha you make it all look easy and smooth
💞💞💞absolutely love your videos
Always appreciate that positive feedback. Hope more vids on this channel prove to be useful.
Congrats on the video man don’t stop grinding!!!
You are awesome bro. I have no words. Thank you from bottom of our hearts.
Appreciate the positive feedback. Can’t do it with out support from viewers like yourself. Hopefully you learned something from this one and just maybe other vids on this channel with prove themselves useful. And if your satisfied with the help please donate to the hungry mechanics fund on Venmo or cash app @ BKdieseldr Stay safe out there.
great video i am a self trained diesel mechanic never changed a dd15 pump your video make it look like it wont be that diffecult to change it @@bustedknucklebydieseldr3228
Thanks brother 👍
We can hear you a lot better now with the music turned down.
Easy Money!!!!
Thanks you 👍
Thanks
In the interest of saving time and money. How much coolant need to be drained before removing the water pump? What size hose do I need for that drain nipple?
Thank you
Drain all the coolant if you don’t want to make a mess. Hose is a 3/8 heater hose drilled open
Will this work with a after market one and just eliminate the wires
Tkns w that was wonderful
Doing variable speed waterpump this wknd 2017 dd15 and thermostat
Where to buy the pump ??? Amazon have no good rew
You can get these anywhere online or from your local dealer
I need to replace my water pump. The black plastic seems to have melted. There is no coolant leak at the moment. How safe am I to drive about 200 miles to the nearest shop?
You should be fine if there’s no leak yes. Just make sure nothing is wrong with the pulley or you may throw a belt.
Can I change the pulley only. My truck gave a stop light engine light and has no cooling leak but the pulley is wobbling. Help please
Thanks for your video was very helpful!
Thanks for watching and reaching out. Hopefully more of these vids prove useful to you and save you time and money.
What nipple?
"Woo woo woo drain that coolant?"
Is there any way you could make a video showing or explaining how to plumb in an external Davco filter assembly onto a Cascadia that doesn't already have one?
Great idea. Very uncommon practice but good idea to get one installed. Next one I come across I’m making one.
@Busted knuckle by diesel dr how do I plumb it in though? Do I go line from tank to inlet of Davco, outlet of Davco to inlet of oem module, outlet of oem module back to tank?
@Busted knuckle by diesel dr one more thing. Do you have any idea where the Intelligent Powertrain Management Antenna is? I've got a code saying there's a problem with it and it also says I.P.M not active while driving. I'd like to have that for fuel mileage.
@@berniesands6201 great question. That is exactly how you would need to plumb those lines.
@@berniesands6201 that antenna is using the gps antenna which is located in most applications in the sleeper roof above the dome lamp fixture. Above the p/s dome lamp is where most are. Some I’ve found are in the headliner seen once the small compartments are removed.
I have a truck with spn 5927 fmi 2 could the water pump be causing this?
Great question and thanks for watching. So with that code is it a mechanical defect detected code but you would also need to check the coolant temp sensors to determine if there screwing up and causing the code. Really some t/s would need to be done because it could be the pump , wiring , or sensors. Would hate to lead you in the wrong direction without knowing all the facts. Hope that helps.
Sorry man you're coolant was contaminated We had to replace all of it $20 a gallon hard break buddy.
Dayco also sells replacement water pump
Good video!!
Have they made aftermarket water pumps yet?
Great question man. Yes they are putting out aftertreatment pumps. There’s quite a few manufacturers in the water pump game. I can’t see them being worse than OEM as original ones aren’t great to begin with, they tend to leak like crazy for no reason.
What’s the normal operating coolant temp for 2014 dd15. What’s to hot ?
Hi boos is there any torque specs on 9 bolts at the pump and on the bolts at pulley too thanks in advance keep it up 👍🏼
Of course there's a torque spec, some guys just can't be bothered to use it.
Where are you located at buddy , I need to replace the water pump?
I wish I had a shop of my own to go ahead and help you with that. But at this time I do not. Hopefully that changes here in the near future.
What did you use to remove the belt? A 6” what?
Extension. That’s all. Breaker bar and 6 inch extension
What are the 9 bolts torque SPECS???
That’s bro
i bought 1/2 engine they give me old style water pump and my old engine has the elctreric one can i use the new one or i have to replace it with electer one
Great question, since your engine ecm is looking for a electronically controlled water pump you would need that version of one. To change that you would need a custom tune to disable that. I imagine the water pump would be the cheaper option.
@@bustedknucklebydieseldr3228 you mean i usemy old one or buy new one
Well ,,, if there’s nothing wrong with your old one than reuse that. Just new gasket for sure. If there any build up of coolant around the lower section of the pulley than do not reuse.
@@bustedknucklebydieseldr3228 ok mine still good just when they gave me new one i said let me use it better do you think if i take it back they change it with the one i want or not puls i have to change just waterpump not all part that concted with it where you add oil
I would say change it to the correct one so there won’t be any check Eng lights. That would be best.
What's the torque specs ?
Good quest, 9 bolts 22lbft and the 5 pulley bolts 18 lbft
@@bustedknucklebydieseldr3228 👍🏼
Where did you buy the water pump from and how much
Haha oh man. This was before the crazy shipping crisis of 2021. Now at days good luck when needing one. I’ve been waiting 6 weeks and counting for one truck.
National back order my friend. Best luck is the scrapyard
@@AJSenju The real question is what isn’t national back order these days.
Como areglar El. Aire frio.de cacadia dd15
Hello Can you do a video how to change the dt12 transmission oil ! Thank you 👍
Good idea. I’ll work on that one. Thanks for the idea.
👍👍
That was too fast take 2 hours with me hhhhh