There are dozens of sights on rebuilding high performance engines, and transmissions, so its grate that you have finely decided to drop a build video. I think this is only your second one in all the years I've watched you videos, so i hope you keep it up, i mean everybody knows how to take one apart now from all the tear down videos you have made., now teach us how to assemble one or two. or three or a lot. I'm Shure your sponsors would like for people to see you using there parts. Sonnax and Transco .That way we all know that you do use there parts. Thank you Richard . You should install a small gantry Crain to lift those tyranny's and save you shoulder, something small that will fit under your work area. You don't need another shoulder surgery.
I am so happy to see a build video from you. This is fantastic, thank you so much. Do you have 1 channel or 2? Are you posting to the original channel? So, it's the next day and I just finished watching the last half. I think you could have eaten off of that transmission. A true artist at work here.
19:36 It warmed my heart to see you use that speed handle as you did. It’s a rare sight to see in a YT video. Most youngin’s are so proud to have an expensive battery impact to zing those bolts down. That is “some special stuff” right there.
Wow! We got an assembly video! Thanks Richard, it's so good to see you, Teresa, and Annie back. (Even if she's protecting the house)!! Keep the good content coming!!
Well I'll be damned!!! Four years of non-stop 4L60E and 68RFE teardowns and this appears. Who would have thunk that transmissions can actually be re-assembled.
Thank you for the build, Richard. Automatics have always been a mystery to me. Watching them come apart was educational. But a build imparts so much more knowledge. Not that I think I could do it. If I lived nearby I'd drop off my 92 D350 just to see if I could get more than 3 years out of a transmission.
Am I seeing this right? Is this an assembly video? Holy smokes. This was already a great week for me going back to work n now this. Might be time for a lottery ticket
We gotta see ms Teressa do a rebuild on a 6l80 she’s probably a master at it after watching you build so many of them😅 Nice and informative vid Mr Richard we appreciate you
I started as a parts cleaner for engine and tranny rebuilds. At first it was a bit challenging to meet the clean that my boss required. After learning those standards I moved up to assembly. It made a lot more sense then, we had very few comebacks and I know a few of the stuff I worked on is still going strong. The person prepping the parts is just as important as the person assembling. I even worked on a top fuel sand rail team just cleaning parts.
Richard, the video we have been waiting for! More awesome information than my brain can comprehend in one go, but WOW. I know this is just 'assembly' at the end, and there was SO MUCH that went into the component build up, and maybe you can touch on those in the future. Again, best channel on the You Tube for this kind of content. Truly a great teacher. You explain things that even a computer geek like me can understand. :) Those clutch hubs...interesting story. Worked for a robotics company that developed a 6 degree of Freedom force sensing robot that put the clutch hubs into the Ford AX4N clutch packs. It was all done manually and was a MASSIVE ergonomic issue before this. We had another robot that took the finished clutch pack and inserted it into the housing. Why? Because the assembly line workers were slamming the pack down into the planetary and rotating it like you did until it dropped in. It would damage the hardened Planets and Sun gears when they did this. Ford was seeing trans failure inside of 15K miles because the chipped pieces would grind down those hardened planetaries or the sun gear stripping them. It was about a $40m warranty issue per year. All because the line worker wouldn't do it "right", and since...well...the employ type, they would walk off the line when told to do it right. SO...A robot came in and did the job for them. Warranty on that item IMMEDIATELY dropped off the map. Too bad that it was a bit late for that trans, I think they only got 2 years before the AX4N was replaced....mainly because of the assembly worker issue.
Yes, you rock Richard! I've been waiting for a 6L80/90 build! I'm a Mopar guy but I wanted to know more about the GM Assemblies. Thank You 😊 Hi Teresa ☺️
thanks for the video was entertaining not like i would ever be assembling one haha master at his craft careful you aint young anymore we dont want you getting hurt then we wont have any more videos
The Assembly videos are so much better IMO to Me.. Great video. Tell you what, hope YT giving good bonus for advertising, My first video watching on YT that had 8 commercials for a 38 minute video. Kinda crazy
I WAS JUST ABOUT TO ASK FOR A REBUILD AND LOW AND BE HOLD YOU DID ONE . NICE ONE RICHARD AND THE THUMB HI TO CODEY AS WELL . ANNEY SLEEP MY BEAUTY. ⚘⚘⚘⚘
I have heard on a couple of videos on setting up clearances. I have yet to see a comprehensive show and tell on setting clearances. I would enjoy such entertainment because I would never hold one responsible for me building my transmissions from youtube videos alone. Also, what manuals on rebuilding do you recommend? Thx for the videos🫡
Sweet transmission Richard. You always do such great work. Mind If I may give a bit of advice? Well, that is a moot question since I am going to anyway. Why not put a small swing crane either manual or electric to lift those. No one, including yourself, wants you to get hurt. Those get pretty heavy after awhile. Cheap way to save your body. Keep up the great work.
Hi Richard & Teresa, Love your videos. I have a 2002 Trans Am with a 5.7 LS1 with 114k and a 4L60E. I have two issues, one: harsh 1-2 shift, and two: a clunk after a 3-2 downshift then step on the gas. After going back in to 3rd no more clunk. Could a rebuilt valve body with Sonnax upgrades help or is this something deeper than the valve body? I am looking for a direction to proceed, any help is appreciated. Thank you.
GM dealer texh here. We are seeing a few 6L90s come through with the output shaft breaking clean from the ring gear. Are you using a GM output/ring gear or is there an upgrade available somewhere?
I was just adding to the statement. To anybody who says otherwise, they would have to consider how he still has a business or why people would even bring their vehicle to him to work on if he only takes stuff apart and doesn't put it back together
Richard, I have a TCI Circlematic powerglide I use for oval track racing. Is that something I can rebuild myself? Asking because a transmission shop would charge more than the cost of a new one. I'm not having any issues but I nave run well over 100 races it must need to be freshened up. It uses 1st gear just to get it moving then locked in high gear.
I don’t see why not everything should be Standard powerglide parts. The only thing I would be concerned would be valve body gaskets but a lot of the companies use the original gaskets and modify them like put an extra hole somewhere through the gaskets lay gaskets on top of the original one and look and see if you could find any extra holes. through the gasket.
@@richardteresacricheducatio3542 Thank you sir, it has their valve body which eliminates the need for a torque converter by using Holley carb jets for low and reverse.
Really good to see one go back together. I like watching you tear one down, but seeing how it assembles is even better. I would love to see you work on a TL70 or TL75. Keep up the great work!
![CAMPปลิ้น | EP.77[2/2] "รับทราบ" แก๊งเพื่อนรัก 10 ปี ที่ไปไหนก็มีตำนาน!](http://i.ytimg.com/vi/ifc0ofD51B0/mqdefault.jpg)
AN ASSEMBLY VIDEO!!!!!!!!!! Make it a multi part video next time with setting up all the clutches...please!
💯
A build video! Fantastic! THANK YOU!!!
Yeah.
There are dozens of sights on rebuilding high performance engines, and transmissions, so its grate that you have finely decided to drop a build video. I think this is only your second one in all the years I've watched you videos, so i hope you keep it up, i mean everybody knows how to take one apart now from all the tear down videos you have made., now teach us how to assemble one or two. or three or a lot. I'm Shure your sponsors would like for people to see you using there parts. Sonnax and Transco .That way we all know that you do use there parts. Thank you Richard .
You should install a small gantry Crain to lift those tyranny's and save you shoulder, something small that will fit under your work area. You don't need another shoulder surgery.
Thanks Richard & Teresa for finally posting an assembly video!
Anyone else notice he putt that hole thing together and his gloves are still clean. Like I'd eat with them gloves on there so clean lol
Good to hear Cody again!!
Thank you very much for showing us how you assembled them. You are extremely knowledgeable God be with you and the boss lady.
Great to see the grand master at work! Finally a build video ! Thank you both Richard and Teresa!
Meticulous and so knowledgeable. You are an artist and such a pleasant individual to watch.
I am so happy to see a build video from you. This is fantastic, thank you so much. Do you have 1 channel or 2? Are you posting to the original channel? So, it's the next day and I just finished watching the last half. I think you could have eaten off of that transmission. A true artist at work here.
Thank you, brother, for the build video.. Been waiting a while.😊
That’s one hell of a piece of engineering nice work by all 👌🇦🇺
God Speed Family. Annie in the House❤️
Ive been waiting for a assembly video since I found your channel/channels, Thank you! Brilliant!
19:36 It warmed my heart to see you use that speed handle as you did. It’s a rare sight to see in a YT video. Most youngin’s are so proud to have an expensive battery impact to zing those bolts down. That is “some special stuff” right there.
Power impacts are great for disassembly, but shouldn't be used for reassembly, IMO.
Wow! We got an assembly video! Thanks Richard, it's so good to see you, Teresa, and Annie back. (Even if she's protecting the house)!! Keep the good content coming!!
Nice work Richard ... And Teresa . lol And thanks for showing the assembly . :)
One of the cleanest smoothest assembly of a transmission on you tube bar none.
Well I'll be damned!!! Four years of non-stop 4L60E and 68RFE teardowns and this appears. Who would have thunk that transmissions can actually be re-assembled.
Thank you for the build, Richard. Automatics have always been a mystery to me. Watching them come apart was educational. But a build imparts so much more knowledge. Not that I think I could do it. If I lived nearby I'd drop off my 92 D350 just to see if I could get more than 3 years out of a transmission.
Am I seeing this right? Is this an assembly video? Holy smokes. This was already a great week for me going back to work n now this. Might be time for a lottery ticket
Glad to hear Cody in there! I enjoyed his vids back on the day!
Yes, sir Cody is one of the family. He is a very loved person
We gotta see ms Teressa do a rebuild on a 6l80 she’s probably a master at it after watching you build so many of them😅
Nice and informative vid Mr Richard we appreciate you
Thank you so much for putting one of these together. Made my day
It was nice to see a build video, hopefully we'll see more of them?
Nice to see you finish a video with clean gloves and a dry assistant for a change. Pet Annie for me.
I started as a parts cleaner for engine and tranny rebuilds. At first it was a bit challenging to meet the clean that my boss required. After learning those standards I moved up to assembly. It made a lot more sense then, we had very few comebacks and I know a few of the stuff I worked on is still going strong.
The person prepping the parts is just as important as the person assembling. I even worked on a top fuel sand rail team just cleaning parts.
clean, clean and cleaner
Richard, the video we have been waiting for! More awesome information than my brain can comprehend in one go, but WOW. I know this is just 'assembly' at the end, and there was SO MUCH that went into the component build up, and maybe you can touch on those in the future. Again, best channel on the You Tube for this kind of content. Truly a great teacher. You explain things that even a computer geek like me can understand. :)
Those clutch hubs...interesting story. Worked for a robotics company that developed a 6 degree of Freedom force sensing robot that put the clutch hubs into the Ford AX4N clutch packs. It was all done manually and was a MASSIVE ergonomic issue before this.
We had another robot that took the finished clutch pack and inserted it into the housing. Why? Because the assembly line workers were slamming the pack down into the planetary and rotating it like you did until it dropped in. It would damage the hardened Planets and Sun gears when they did this. Ford was seeing trans failure inside of 15K miles because the chipped pieces would grind down those hardened planetaries or the sun gear stripping them. It was about a $40m warranty issue per year. All because the line worker wouldn't do it "right", and since...well...the employ type, they would walk off the line when told to do it right. SO...A robot came in and did the job for them. Warranty on that item IMMEDIATELY dropped off the map. Too bad that it was a bit late for that trans, I think they only got 2 years before the AX4N was replaced....mainly because of the assembly worker issue.
am I awake. a assembly video. WOW. love how you showed how to put one together after hours of cleaning off camera. great job both of you guys
It's official now, education involves teardown and reassembly.
Great job Rich.
Yes, you rock Richard! I've been waiting for a 6L80/90 build! I'm a Mopar guy but I wanted to know more about the GM Assemblies. Thank You 😊 Hi Teresa ☺️
I would ABSOLUTELY LOVE TO SEE a collaboration between you and Dave’s garage! You build the trans, he builds the motor
Dave auto are crooks, Richard is NOT.....
What a beautiful assembly; you make it look easy💪🏽
It's so awesome to finally see an assembly video hopefully there is more to come of you building transmissions as well as disassembling them
Love to see them going back together!
thanks for the video was entertaining not like i would ever be assembling one haha master at his craft careful you aint young anymore we dont want you getting hurt then we wont have any more videos
Loved seeing the old speed handle wrench come out. Great video!
Good morning Richard and Teresa finally an assembly video awesome 😎👍👍
The Assembly videos are so much better IMO to Me.. Great video. Tell you what, hope YT giving good bonus for advertising, My first video watching on YT that had 8 commercials for a 38 minute video. Kinda crazy
I wish I could afford to send you my 6l90 out of my ZL1, not that i need it but I'd prefer you to be the one who builds it for me
I love seeing the parts that I program for manufacture get put in
Great video Richard & Teresa always wealth of knowledge always enjoy the content.
Ok guys nice one. 👌 loving the assembly.
Cool vid.😎
Greetings from warm, sunny, and windy Eastern Washington.
You really should build in a small overhead gantry crane in your new shop! 23:53
Richard built my 4l80 a few years ago, still running strong, Thank you sir, Love The videos!!!!
Thanks for showing a few tricks of the trade. Really enjoyed the assembly video keep them coming
no wind? I dont believe you, lol....have a good day guys
So cool to see an assembly video!!! Someday you should talk about ATF and what you use and why Richard, thanks!!
So great to finally see how they go together. Nice
O dam!!! A build video!!!
Hey Teresa, makes a change huh…. Richard doing air checks and no spraying you with transmission fluid lol
Thank you so much for the assembly videos! Especially a built unit!!!!
Awesome keep doing these!
We like the long video,, it's not like most of us can assemble one of these modern day complicated transmissions..
Nice video guys.
Thanks for the build video guys!
I use a Ford Modular Head Bolt to lower the carrier down in the case.
Education is key
Make these as long as u want
I WAS JUST ABOUT TO ASK FOR A REBUILD AND LOW AND BE HOLD YOU DID ONE . NICE ONE RICHARD AND THE THUMB HI TO CODEY AS WELL . ANNEY SLEEP MY BEAUTY. ⚘⚘⚘⚘
Finally an assembly video! Please please do more!
A true skill that is being lost. Thank you for sharing the knowledge
Very good video really enjoy watching you work on these... Im a GM man myself self going to be doing a 4l60e build for my 98 Z71 👊
Don't forget, " Bird Bird Bird Bird is the word"🤙🤙🤙🤙🤙
Thank you great video
Cody!!!
Show us how to build a turbo 400 for 800 wheel
Oh my - an assembly video!
So, is this your new, permanent YT channel or is "someone" re-posting your videos on the old channel? Either way, Welcome back!
Assembly video!! Keep ‘em coming!!!
I thoroughly enjoyed this Richard. Thank you sir.
Awesome video, Richard!
Great work
Great videos, keep it up.
My kind of Trans video
Tricks of the trade or just an assembly video. I only remember one other video where they put one together.
Are you running a Davis VPS on the Dirty Bird? that with a Holley Dominator is the best wheelie control ever!
Thank s
Thank you Thank you
How do you know soo much Richard? Your a very brilliant man.
I have heard on a couple of videos on setting up clearances. I have yet to see a comprehensive show and tell on setting clearances. I would enjoy such entertainment because I would never hold one responsible for me building my transmissions from youtube videos alone. Also, what manuals on rebuilding do you recommend? Thx for the videos🫡
👍
Sweet transmission Richard. You always do such great work. Mind If I may give a bit of advice? Well, that is a moot question since I am going to anyway. Why not put a small swing crane either manual or electric to lift those. No one, including yourself, wants you to get hurt. Those get pretty heavy after awhile. Cheap way to save your body. Keep up the great work.
Yes sir, I’m going to be doing that. I found one at Harbor freight I think that’ll work perfect
@@richardteresacricheducatio3542 Glad to hear that. We are not spring chickens anymore. LOL
How do u clean the housing so clean
I guess TH-cam is not sending notifications out.
I wasn't notified of the last 3 videos posted.
If that keeps happening, let me know would you please
@@richardteresacricheducatio3542 sure will
Hi Richard & Teresa,
Love your videos.
I have a 2002 Trans Am with a 5.7 LS1 with 114k and a 4L60E. I have two issues, one: harsh 1-2 shift, and two: a clunk after a 3-2 downshift then step on the gas. After going back in to 3rd no more clunk. Could a rebuilt valve body with Sonnax upgrades help or is this something deeper than the valve body? I am looking for a direction to proceed, any help is appreciated.
Thank you.
I'm curious as to what you are lubing everything with and also the brand of torque wrenches you are using.
Did you have to drill the really tiny hole in the pump? I did once, so afraid of breaking the drill bit.
GM dealer texh here. We are seeing a few 6L90s come through with the output shaft breaking clean from the ring gear. Are you using a GM output/ring gear or is there an upgrade available somewhere?
They are back. Since when?
To all the naysayers that say Richard only takes them apart. 😝
Or else how would he still have a business if he only took them apart?
@@user-jp1hs6sl3h You would have to ask them. I am not one of them.
I was just adding to the statement. To anybody who says otherwise, they would have to consider how he still has a business or why people would even bring their vehicle to him to work on if he only takes stuff apart and doesn't put it back together
Can you please do a Nag1 722.6 awd 🥹
Hey guys! 🎩🛡⚔🌄🇺🇸⚫🔴🏁
Nothin' worse than a Dirty Bird wheelie.......videos we hope?
Can you elaborate whats going on with the old videos being reposted on the other channel?
He got the channel back
What happened to original channel and this looks like a different shop?
@@shadowopsairman1583 what does that mean? got channel back? Never knew he lost it?
The video posted 12 days ago, sonnex update, had an explanation at the end.
@@12345....... didnt hear any explanation why videos are being reposted, thats what is not understood. Listened to the end and heard nothing.
Please list contact info
Need my unit rebuilt
I'm looking to bring unit asap
Richard, I have a TCI Circlematic powerglide I use for oval track racing. Is that something I can rebuild myself? Asking because a transmission shop would charge more than the cost of a new one. I'm not having any issues but I nave run well over 100 races it must need to be freshened up. It uses 1st gear just to get it moving then locked in high gear.
I don’t see why not everything should be Standard powerglide parts. The only thing I would be concerned would be valve body gaskets but a lot of the companies use the original gaskets and modify them like put an extra hole somewhere through the gaskets lay gaskets on top of the original one and look and see if you could find any extra holes. through the gasket.
@@richardteresacricheducatio3542 Thank you sir, it has their valve body which eliminates the need for a torque converter by using Holley carb jets for low and reverse.
Really good to see one go back together. I like watching you tear one down, but seeing how it assembles is even better. I would love to see you work on a TL70 or TL75. Keep up the great work!