Your dot matrix is incredible! I’ve been searching and searching for a shop to tint my bmw that can do a clean job on the dot matrix. You prove it’s possible!
You prolly dont care but does any of you know a tool to log back into an instagram account? I was dumb forgot my login password. I appreciate any tricks you can offer me!
Thanks for the tips. I just had my BMW tinted and the installer messed up big time. He clearly didn't know how to install or disable with frameless windows.
The door panels should always be covered in plastic sheeting, always. Soapy water can corrode electronic (switch) connections as well as stain some leathers. This is a simple and quick process that installers do!
i like how you repeat or explain a new on the whole process and why. i may forget the process so repeating it again on each job is a good thing! i have sub you. i hope you do more different cars.
Super late. But most vehicles have a drain that automatically goes to the bottom of the door. And you open the plug at the bottom of the door to drain the water.
Nice to see you put so much attenton to detail, i might also use masking tape at the begining of de dot matrix before using the steel wool, to make sure you wont scratch the glass.
My BMW 328i windows go down about an inch when opening the door. How do I raise the window back up when the door is open so I can get the tint all the way to the bottom of the glass?
Window Tint Warriors I saw you put the screwdriver in the locking mechanism but it didn’t raise the window. I tried that in my car and the window did not go all the way up.
Just had my windows tinted 3 days ago and the bottom of the tint for the drivers side has cracks (bmw 4 series convertible so the window goes down when door is opened) is there anything I can do to fix this or stop it from happening again as the company provided lifetime warranty but this is second time it has happened
Hello, i have a 2001 lexus es300 with frameless windows and I ordered a 10ft long and 40inch width tint, is it enough for the front 2 and back windows plus the rear windshield???
I’ve the same car (also same int and ext colours) i’m trying to make up my mind about VLT % between 50% front + rear or 50 front + 35 rear... which VLT % has the tint you installed?
Always smart idea to reduce visibility by putting a dumb ass tint on the front windows. A hazard to pedestrians and motorbikes due to the reduced visibility
Watching this a prospective tint customer turns me off. I don’t want someone putting a heat gun, soapy water, and razor blades near my $98,000.00 brand new vehicle. F that.
These videos teach me that I’ll never tint my own windows myself!
went from not knowing anything to tinting my windows and they actually look good, very helpful
Your dot matrix is incredible! I’ve been searching and searching for a shop to tint my bmw that can do a clean job on the dot matrix. You prove it’s possible!
Love the quality behind these videos Sean!! This video deserves every like 🤝
Mondo TheGreat! Thank you!!
You prolly dont care but does any of you know a tool to log back into an instagram account?
I was dumb forgot my login password. I appreciate any tricks you can offer me!
@Bruno Case instablaster ;)
Thanks for the tips. I just had my BMW tinted and the installer messed up big time. He clearly didn't know how to install or disable with frameless windows.
same .. mine peeled from bottom within a week .. had to bring it back .. second time it peeled from dot matrix after 6 months .
Also has peeling with my bmw; and TERRIBLE dot matrix.
Do you remember how much they charged you?
Is charcoal tint same as carbon tint?
I watched 4 or 5 video's like this and yours is definitely the best!! Big thumbs up!
The door panels should always be covered in plastic sheeting, always. Soapy water can corrode electronic (switch) connections as well as stain some leathers. This is a simple and quick process that installers do!
how do you deal with felt on the seal?
i like how you repeat or explain a new on the whole process and why. i may forget the process so repeating it again on each job is a good thing! i have sub you. i hope you do more different cars.
What’s the tool to jam the window ? Where can I buy ?
Just curious, would it help to put some absorbent cotton braid so the water / soap doesn't go in to the door?
Super late. But most vehicles have a drain that automatically goes to the bottom of the door. And you open the plug at the bottom of the door to drain the water.
Are those blue towels lintless?
What setting are you using with the heat gun?
Nice to see you put so much attenton to detail, i might also use masking tape at the begining of de dot matrix before using the steel wool, to make sure you wont scratch the glass.
The steel wool won’t scratch the glass if you use 000
@@WindowTintWarriors thanks
👌👍☕🥧You explain very well and calmly with patience
What brand of tint you where installing and what percentage?
How would I hand cut for a Honda S2000 where the edges are round?
Nice job. Doing my Mercedes this weekend, your video really helped.
which model exactly? and how did it go?
Is it acceptable to use windex cleaner to attach the film to the window? What is the best liquid or fluid to use for it?
No way. Only use soap. Johnson and Johnson baby shampoo is best
Very professional job. Properly explained process
What tint percentage are you doing on this BMW?
Had you have the car inside garage after?if yes for how long?thank you
Fantastic video really helped
hellow.what is the that using spray?water?shampo?
So how do you untuck the latch
Can you use autoglym fast glass to clean it or any soapy water
What kind of heat gun?
Does 2000 sandpaper work as good as the steel wool?
Absolutely Fkn not
How you make window up even the door open?
My BMW 328i windows go down about an inch when opening the door. How do I raise the window back up when the door is open so I can get the tint all the way to the bottom of the glass?
i show how that is done at 0:49 :)
Window Tint Warriors I saw you put the screwdriver in the locking mechanism but it didn’t raise the window. I tried that in my car and the window did not go all the way up.
Brian Wenning pull it up lol
hi sir. why we don't do thats in tesla by 000
Very thorough. Thanks for posting this video.
Just had my windows tinted 3 days ago and the bottom of the tint for the drivers side has cracks (bmw 4 series convertible so the window goes down when door is opened) is there anything I can do to fix this or stop it from happening again as the company provided lifetime warranty but this is second time it has happened
Is the window not being scratched by cutting on the window for the round edges?
no becUse it is a stainless steel blade
Amazing mate 👌
Is that a fit bit or Apple Watch?
wait but i always have to cut the bottom. do you always leave the bottom without cutting or is it only for windows without frame? If that makes sense.
We only cut the bottom if it is not straight
Good job bro👍
Hello, i have a 2001 lexus es300 with frameless windows and I ordered a 10ft long and 40inch width tint, is it enough for the front 2 and back windows plus the rear windshield???
No bc you’ll mess up 1 or 2 windows and throw those films out
How much this job cost for the customer
That takes some real deal skill !!
any need to remove the door panel on the 4 series? thanks
No
@@WindowTintWarriors thanks...
Does anyone know to disabled window going up and down?
I’ve the same car (also same int and ext colours) i’m trying to make up my mind about VLT % between 50% front + rear or 50 front + 35 rear... which VLT % has the tint you installed?
Do it
Great job on the tint n video.
This just kicked my ass for 6 hours today... but now I know lol
So wait you didn’t pull it down a lil for the top cut
How do you mix your baby shampoo and your distilled water do you shake it
I use water and baby shampoo and i shake it
@@simplybuilt_1708 thanks friend..
Perfect!
Nobody: Nothing
Someone's daughter: 2:05
Shouldve covered the inside of the door so water dont wet the door electronics.
Hi
All that this video has done for me is convinced me not to try this myself and just pay the £200 to get it done for me
Did you get it done?
@@Horizon301. started with just the passenger rear.. money’s tight
한국에서 이렇게 틴팅해주면 바로 빠꾸야... 엣지 다 채워줘야돼
Take a break haha!
😅😂😂
👍👍💋
Always smart idea to reduce visibility by putting a dumb ass tint on the front windows. A hazard to pedestrians and motorbikes due to the reduced visibility
Ok 👍
So please don't fit them. If someone dies the lawyers will be coming after you as well
holy shit .... you cut this 11:10 , you cut this on the glas....the glass it's done full of scrathes
awful
😂😵
and eat a kitkat jk
Watching this a prospective tint customer turns me off. I don’t want someone putting a heat gun, soapy water, and razor blades near my $98,000.00 brand new vehicle. F that.
Lol. 🥳
Lmfao.
Good job and u train me than l know
What materials to rub the dot matrix?