Man This young guy knows his business He’s been doing it for so long that the way he explains it makes it so easy to understand Right words, movements, tricks and demeanor, he’s a master on his trade Thanks a lot! I’m 56 YO and I’m going to do my very first window tint With your help I will make it happen, with a few mistakes on my side, 😅
I have to say brother, your videos are awesome. I can't afford to go to school so I watch your videos every chance I get and practice on my own car. I pray that's enough to get me going because I really want to make this my career and I'm no spring chicken. Patience and attention to detail are a couple of my best traits so I pray that I can be successful
Thanks for this. I’ve done my quarter windows and rear window, now im ready for the the real test. Used some cheap tint for a practice with the pattern already but the techniques on your vid should help me get a great diy result
Appreciate the video! I’m about a month in with tinting and I was kinda struggling with cutting the film with the edges along the window and this helps! Ty.
Great job love the extra details, some Other videos I’ve watched have suggested at the end mounting it on the outside and taking a heat gun to give it a little more of a curve and fit but do you think that’s necessary I noticed you didn’t do that at the end?
I don't understand why some videos it seems people are shifting the sides and sometimes they're not? How do we know when we need to shift it? Thank you for these videos!
Right like shifting it back before cutting the bottom ? I noticed he only shifted to the left, once then roxeesws to cut both sides . Is this the correct way?
I want to do just 8in down and have visors on windshield and side windows on my Peterbilt. Do I just use tape to create the bottom edge and follow same process?
Hi I like your videos they way you explain Is there way I can come to take classes from you because I’m having hard time on tinting especially on cutting.
I'll have to try this method next time I take a swing at tinting our car (last time didn't go so well). It's pretty old so it's a perfect candidate for some cheap $10 tint attempts haha
A true artist. So many tinters now rely only on the plotter and the top edge is pre cut etc. So with window shapes not being the same, u have the hideous top line showing of bare glass some times. It amazes me of how many tinters have no clue what filing the edge is on window tint film.
So when i go to roll the window down i shouldnt pull the film down a quarter inch? Maybe thats why my cuts dont end up with jus the small flaps at the end to cut with a ruler then huh?
Man I’m trying to tint my eclipse and the side mirrors are in the way and the windows are crazy curved and the tint keeps snagging onto the window weather gasket
So If necessary do you shrink your film after you install it? My instructor taught us to shrink it on the outside before installing but I guess you could really do either
In my opinion, this is why you shouldn’t cheap out on window tinting. I trust His knowledge and expertise way more than some nut job or my own shaky hands doing the work.
Its hard to tell. When your cutting the top edge. Do you angle to blade down twords the window? Hard to put into words. Im meaning blade is at a 45 degree angle but as far as the blade itself. Is it riding flat on fhe top edge or do you angle it down twords the glass edge? Hope that makes sense
@@WindowTintWarriors These are the things I need hands on training for. I practice and do great. Get on a customers car and do it without jagged edges but too doesnt want to line up. Its tiggt at top and gap at curve or tight at leading edge and gap at top. Frustrating. I also practice then get busy with life and dont tint anything for a month or 3. Im decent. I still struggle with debris and I have issuse with tight mirrors where the tint wants to bunch up and crease when I roll down to cut top edge. You should do a video of issues that may arrise and how to deal with them. Like a messed up cut or creasing when the mirrors are really hot tight to window frames.
You forgot to put it down. You can not cut on the glass of the car. It is scratched glass by any machine tinting blades, I use 2 squeegee when i cut film
do you have a video of tinting a model 3 back glass only half way up to the furthest defroster line? would I shrink as a normal up and down or shrink side to side?
Man
This young guy knows his business
He’s been doing it for so long that the way he explains it makes it so easy to understand
Right words, movements, tricks and demeanor, he’s a master on his trade
Thanks a lot!
I’m 56 YO and I’m going to do my very first window tint
With your help I will make it happen, with a few mistakes on my side, 😅
Thanks for all the help shawn started my window tinting Buisness from home. Everything is going good thanks to you and all the tint gods💯
Awesome!!! 👏🏼👏🏼👏🏼
@@WindowTintWarriors where can I get the group where they show you how to remove certain panels?
@@TheFuzeYTcall me if from California from Facebook
How's business?
@@Octavariam Absolutely amazing. Best decision I've ever made😎
there are so many good tint videos but what makes this great is all in the details, the smoothness of your motion, the subtle confidence.
I have to say brother, your videos are awesome. I can't afford to go to school so I watch your videos every chance I get and practice on my own car. I pray that's enough to get me going because I really want to make this my career and I'm no spring chicken. Patience and attention to detail are a couple of my best traits so I pray that I can be successful
I've been watching a lot of your videos, man you are the best trainer out there.
Bro this works so perfectly I got it down on the first try and my windows look great
I tried tinting a window for first time and ended up with a inch gap in the bottom why is that and after i re done it i ended up with tiny bubbles
Great job...I have questions can we do installation directly without the shrink of front glass tint ???
Fantastic!!! Thorough and informative with great tips...a real professional!!
3:00 you said spray some soapy water, what kind of soap do you mix the water with man?
Great job ... I learned a lot of techniques from your videos ... Thanks for the effort ... from Algérie 🇩🇿🇩🇿🇩🇿
Thanks for this. I’ve done my quarter windows and rear window, now im ready for the the real test. Used some cheap tint for a practice with the pattern already but the techniques on your vid should help me get a great diy result
GOOD JOB EXPLAINING THE LITTLE DETAILS. THANK U
Appreciate the video! I’m about a month in with tinting and I was kinda struggling with cutting the film with the edges along the window and this helps! Ty.
Best tint install demo I've seen
Your back at what you do best. Instruction. I still want to come up and spend a day or so. Let me know. Im ready whenever!!
You sir are a blessing thank you for the help!
Very well explained video on the net.
This video helped me more than 100 other videos did
Great job love the extra details, some Other videos I’ve watched have suggested at the end mounting it on the outside and taking a heat gun to give it a little more of a curve and fit but do you think that’s necessary I noticed you didn’t do that at the end?
okay 👌🏾 i’ll what
King of the window tinters😎
I don't understand why some videos it seems people are shifting the sides and sometimes they're not? How do we know when we need to shift it? Thank you for these videos!
Great video but how do you cut out the pattern if you got vent visors installed already
Hi mate,
What dryer sheet are you useing…in fron France and I can’t find any here…thank you
Shawn, why did you leave the tint level with the bottom edge "window seal"?? I'm super curious
i really wanna know this as well, usually it goes into the trim like half an inche isnt it?
Ship về Việt Nam ko bạn
SIR, I LOVE YOUR WORK, GREAT !
You are the man!!,thanks for sharing your knowledge.
Right like shifting it back before cutting the bottom ? I noticed he only shifted to the left, once then roxeesws to cut both sides . Is this the correct way?
Thanks brother. You make it look so easy. God bless you
I can watch these for hours
I just learned so much from this!! Thank you so much!
Hello very nice video, you explain so good thank you a lot have a nice week-end, (Loic Strasbourg France)
Thanks 👍
Thanks fir this video...i am having some more benefits in it...thanks alot
Thank you for all of the great detail!
Can you use a 30 deg blade for tint? I was told it's mainly for vinyl as it may scratch the glass. Thanks!
It will definitely cut the glass. Because it is much sharper
Very good instructor
Hi
What angle do you use when cutting top edge of the window tint that is on thr window?
I want to do just 8in down and have visors on windshield and side windows on my Peterbilt. Do I just use tape to create the bottom edge and follow same process?
Very informative!!!
Thanks for this
Ur the best man. Thanks
Very solid video. Thanks!
😊watching from philippines
Hi I like your videos they way you explain
Is there way I can come to take classes from you because I’m having hard time on tinting especially on cutting.
I'll have to try this method next time I take a swing at tinting our car (last time didn't go so well).
It's pretty old so it's a perfect candidate for some cheap $10 tint attempts haha
Thank u brother
Amazing Work 👍😃
Good thing they sell pre cut tint for your cars now days :)
A true artist. So many tinters now rely only on the plotter and the top edge is pre cut etc. So with window shapes not being the same, u have the hideous top line showing of bare glass some times. It amazes me of how many tinters have no clue what filing the edge is on window tint film.
Hey shawn on a 2017 Acura RDX do you have to remove the whole panel in order to bottom load.
Thanks! 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Very good instruction. Thank you!
So when i go to roll the window down i shouldnt pull the film down a quarter inch? Maybe thats why my cuts dont end up with jus the small flaps at the end to cut with a ruler then huh?
Do you use just water or anything else with water?
... my husband & i a sprayer full of fresh water & a few drops of baby shampoo...
We do Tinting on the side.. 👍🙋♀️
Incredible !!!
Can you show a video on how to tint over existing tint ?
Wait did you not pull down a bit? Wont the tint be too short
Thanks.Good job.
Man I’m trying to tint my eclipse and the side mirrors are in the way and the windows are crazy curved and the tint keeps snagging onto the window weather gasket
Thanks Shawn! I’m planning to tint my Toyota 4Runner. What is the purpose for shifting the film 1/2” forward?
So you dont undercut the film and have gaps when mounted
Good job friend
10/10 explanation
Awesome video
thanks for the tips brotha! i got my tools in today and i’m ordering film here soon. really appreciate the videos man!!!
Amazing video thanks you for teaching us
Awesome job cheeeeeerrssss
So If necessary do you shrink your film after you install it? My instructor taught us to shrink it on the outside before installing but I guess you could really do either
I typically only shrink the bottom when it comes to doors.
great work
How cutting the back screen???
Gracias por compartir tus conocimientos saludos de Acapulco
Hai mate, please show the installation process of tinting a range rover, any model...
Tinting legal in your state? % ratio?
Awesome!! Thank you.
Where do you purchase your film?
we are tint factory
In my opinion, this is why you shouldn’t cheap out on window tinting. I trust His knowledge and expertise way more than some nut job or my own shaky hands doing the work.
Great help.
Great video this helped me so much. Thank you!
Where r u from?
thank you for the video man you've been a great help
Thanks for the detail
After you shift the film forward and cut the back edge you have to shift the film back half way or when you cut the top edge the cut will be off
Why is that? Ive been tinting for 11 years and don’t do that.
I also would like to know why I have to shift it back… are you not giving yourself bottom slack
Thanks for taking the time to put this video together! A lot of great and helpful tips on this!
thank brother
This is amazing thank you
Appreciate it!!!!!
Thanks my friend i got it
Great video, thank you
Osm bro ❤😊
Its hard to tell. When your cutting the top edge. Do you angle to blade down twords the window? Hard to put into words.
Im meaning blade is at a 45 degree angle but as far as the blade itself. Is it riding flat on fhe top edge or do you angle it down twords the glass edge?
Hope that makes sense
Thats right. You angle the blade just as you explained
@@WindowTintWarriors These are the things I need hands on training for. I practice and do great. Get on a customers car and do it without jagged edges but too doesnt want to line up. Its tiggt at top and gap at curve or tight at leading edge and gap at top. Frustrating. I also practice then get busy with life and dont tint anything for a month or 3. Im decent. I still struggle with debris and I have issuse with tight mirrors where the tint wants to bunch up and crease when I roll down to cut top edge.
You should do a video of issues that may arrise and how to deal with them. Like a messed up cut or creasing when the mirrors are really hot tight to window frames.
THANK YOU SIR , I'M LIVE IN INDIA HELP ME OTHER TECHNIC
When dude is literally tinting my exact car I’m about to tint
You forgot to put it down. You can not cut on the glass of the car. It is scratched glass by any machine tinting blades, I use 2 squeegee when i cut film
Yehp
Goat
Thanks sirr
how come you skipped the molding, shouldn't you mold the film before installing it?
Yes all time
What if the car has visors?
Just roll down the window until you can cut the top edge.
Thank you so much my friend
nice
do you have a video of tinting a model 3 back glass only half way up to the furthest defroster line? would I shrink as a normal up and down or shrink side to side?