Seized Bent Exhaust Valves. Solution? Sodium Filled Exhaust Valves - Chevy Cruze 1.8 Turbo SuperTech
ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2022
- We bent the exhaust valves, do to heat, and my own mistakes. Let's make sure it doesn't happen again and upgrade our exhaust valves with some SuperTech sodium filled exhaust valves.
I also dive into some serious matters about what's going on in our lives. From Shannon's liver disease, to the kids mom needing a heart transplant.
Want to help fund the build? www.gofundme.com/f/help-raise...
10% OFF code for all maxpeedingrods products : MATTCHEVY
Blow-off Valve link:bit.ly/3CPR7Qa
Maxpeedingrods web: bit.ly/3DK0Ut0
Installing the $113 eBay Turbo on the Chevy Cruze 1.8 Daily Driver Part 1 - • Installing the $113 eB...
The eBay Turbo is Building BOOST!!! Chevy Cruze 1.8 Daily Driver Build - • The eBay Turbo is Buil...
PCV Issues we had - • Something Went WRONG w...
Making an equal length turbo manifold - • How to Make a DIY Turb...
Making a log style turbo manifold - • The DIY Turbo Manifold...
Custom Forged JE Pistons - • Custom Forged JE Pisto...
How to Install an Upgraded Fuel Pump - • How to Install a Repla...
Custom Camshafts for the 1.8 Cruze - • My Reground Camshafts ...
Upgraded Stage 5 Clutch and Aluminum Single Mass Flywheel - • Single Mass Aluminum F...
Be sure to follow me on Instagram to get the inside scoop...
►Instagram - @matthewchevalier
🔔 Subscribe and hit the bell to support me and so you don't miss a thing! - แนวปฏิบัติและการใช้ชีวิต
I have to say that I've enjoyed this journey with you since the beginning. You're a great man who seems to put everyone before yourself. Man to man, go be with you wife, kids mother and dad. Health and family always comes first. Your family will be in my prayers.
I appreciate that.
As a frequent viewer, I appreciate your openness and willingness to share your personal life with me and everyone else watching. Thats a lot to deal with mentally. I hope it all works out for you and everyone else around you!
Just remember it always works out. ALWAYS.
Sometimes it just takes longer than other times.
I appreciate Gustavo!
I know my last comment was "cant wait to see some numbers" but family and selfcare comes first without a doubt. The cruze will still be there no matter how long it's sitting so take the time for the things that can't or shouldn't wait. I'm pretty sure we all, everyone who's following you on this journey so far would agree on that so don't worry about YT too much. Greatest wishes for you, your family and loved ones from across the pond!
I appreciate that.
Keeping you and your awesome family in the prayers, sir! Thank you for everything you've done and provided us with!
I appreciate that. It's been an uphill battle this year, that's for sure. One of the great things about this project has been a constructive distraction.
It takes a real man it openly talk about issues that he and his family are going through been watching for along time and I think I speak for alot of your viewers we will be here waiting for the next video weather it's in a week or a month
Thank you Dan!
So sorry to hear about everything going on at the moment. Keep your chin up and don't give up. After 5+ years of dialysis I received a kidney transplant 3 years ago and it saved my life. I'm forever thankful for my friend (aka my donar aka my now brother) and glad I didn't give up to be here today!
Thanks for sharing your story. Giving up is not an option. I've definitely been struggling with anxiety lately with everything going on, but luckily we all have each other to lean on.
Nooooooooo. Woke up here, in Australia, Monday morning to a new TH-cam notification. And it's certainly not the video I was expecting. Can see the struggles you're going through, and that's just the small insight we get publically. Family and your health comes first. Projects should be fun, as you said an outlet. When it becomes work, it's time to step back or take a break. Look after yourself and your family and take the time you need. We'll be here waiting 👌
I appreciate that. Not throwing in the towel. Does feel good talking with you guys about what my situation is, and has been. Lots of heavy stuff. Kinda been leaning on the project to take my mind off of life problems, and when things don't go well with the car... whewww... certainly compounds the stress and anxiety of life.
@@cmattdabrat you'll get there. Just happy to come along for the ride.
Hey man, don't worry, there isn't a single person in the comments that doesn't understand what it's like to be so excited about something that you rush it and end up in frustration because of it. It's a lesson learned. If I've learned anything about you it's that you don't give up. I've been following you since the start of this project and it has come a long way with a long list of problems and you've pushed right through and if Shannon is anything like you she'll push right through too. I'll keep you all in my prayers too brother.
Thank you, I appreciate it. We'll definitely pull through. Can't say it's been the easiest thing, and this project has definitely helped with keeping me mentally strong by taking my mind off of all that's going on. It's a good temporary distraction.
You've been posting alot for everything you've been going through, keep pushing through everything man!
Thank you, I will! It's been a positive distraction.
You've always been so funny and positive, I don't like to see you going through these bad things. I hope everything get better to you and your relatives.
Thank you so much! Things got a little worse before they started getting better. I'll be back soon. Just couldn't come on and mope lol.
Family and your self are most important! Take your time with the car, it will get done when it gets done!
Absolutely. Which has been the case. The car and posting videos is just a nice construction distraction at times so I'm not sitting around,.
I'll be praying for you. As I think of you. Keep us up to date. Don't stress it.
I appreciate it. Trying not too, and will definitely keep you guys posted.
Keep pushing through everything man!
I appreciate it.
Wow! I've had some similar experiences with my Cruze build, injury, the ex whose the mother of my child issues within the last year. Sending prayers! Keep your head up brother!
I appreciate it!
Keep strong and prayers go out to everyone
Thank you!
You do what you gotta do man, it's nice seeing your videos but your family should always be first. You got this, hoping the best for you and yours!!
You're right about that, and they have been. Sometimes all you can do is wait for things to improve, which the project just helps distract me from the stress and anxiety of the situation.
A build is a build. You will get it right. Trust the process man. The “end” will be worth it.
Thank you!
I advice taking ur time and clearing ur mind. Life is a hard battle and I hope you pull thru.
I appreciate that
We keep er moving, praying for ya bud
Thanks!
Wow man. I know how you feel about everything that’s happening. I been going through something similar. All I can say is try to be positive and strong. The best of luck ☘️
I appreciate it. It's all I can do. Just hanging in there hoping for the best.
Sending out prayers to you and your family. I wish you all the best and pray that things turn out great for you! You bring great positivity to your channel.
Thank you so much!
Hang in there, Matt.
Will do!
Keep your head up Matt it will come together.
Thank you. I'm hanging in there. :)
Sorry to hear about the family..I hope everything works out for you. Do what you need to we all will be here when you are ready. On another note I just picked up a new play toy . 2012 Challenger R/T😝
Thanks Mike! That's awesome. Looking forward to hearing what you do with it.
@@cmattdabrat I got plans... I definitely will
Can’t wait for more videos
I can't wait to make more! Cylinder head is at the machine shop, and just taking a moment to take care of Shannon. I'll have some videos up soon.
You’re going to be fine bro, it’s a lot going on for you and everyone right now. It’s pretty stressful for everyone, so nobody blames you for taking any time that you need. We’ll be here when you’re ready, TH-cam and all that will be here but making those memories with your family is very important. I’m praying for you bro. 🖤
I appreciate that. Man, my anxiety has been giving me the fits, but I don't give up. Just got to push on through, and just taking a moment to decompress.
those edited videos are really great
Thank you!
Cars on slow down,
Family comes 1st,
Getting a larger home isn't a bad idea given the situation at hand.
Condensing over head cost on the business is a great idea for cost per unit sold for profit.
Wish your family the best on both sides.
As for your table is full & if you need to cut the cars loose for a bit that isn't a issue.
Be safe all
I appreciate that Jeff. Certainly some heavy things going on, and lots to thing about. Recently I've been struggling with a lot of anxiety over everything, but just staying strong as possible. Working on the car has definitely been an escape, aside from when things don't go well lol. So just trying to balance my current situation the best I can.
If you want to help support the build, be sure to check out my GoFundMe - www.gofundme.com/f/help-raise-funds-for-a-dyno-session?+share-flow-1
Certainly I can, have funded this myself. Given family health issues, this will definitely help me get to my goal faster. And to be honest, the build has helped me mentally push through these rough times. So anything will help.
Pardon my question it's mostly out of ignorance but since heat is the issue what about an intercooler? If you lower intake temperature you will lower the exhaust temp. At the same time you optimize ignition an increase power output. I know you are basically blazing a new trail here. It's gotta be a bit frustrating and expensive in both time and money. Anyway I wish you all the best. And I will keep tuning in rooting for you!
Thank you! I have a really large intercooler. I just don't think the stock valves are up to the task of how much heat they see, paired with the guides needing a refresh. I'll report back once I get it off and to the machine shop.
Man…Wish best for your family
Thank you!
Honestly I’m surprised you’ve made it this far with the EcoTec motor. Those motors were notorious for not living to 80k miles under normal condition… and if it did, the trans would grenade shortly after. And yes, warped heads and blown head gaskets was extremely common. Keep your head up, good luck brother.
I appreciate it!
Sorry disagree with that comment.about the engines, very good engines and easily surpass 80k...168,000 hard miles on a modified z18xer here 😁 however...gearboxes fully agree with 🤣 on my third lol.
It’s been a bit since this video dropped. Hope everything is ok with you and your family buddy. Missing the videos
Hey Grant! Thanks for checking in. We got bad news about Shannon. They said she has a 65% chance of living longer than 3 months. So just been spending time with her.
@@cmattdabrat thoughts and prayers with you and all your family from Australia mate
@@grantteasedale5657 thank you
Also, check your exhaust side VVT pulley in case it's failed where it was modified. For it to do it twice in quick succession is weird? I think jafromobile has a good video on checking valve clearance with dial gauges and manual TDC. Just something seems off here imo?
Thanks Paul. I'm going to check it over and make sure we're good to go. I don't think it likes 8200 rpm lol.
my condolences bro i somewhat understand as i have delt with cancer in my family and i have failing liver from stupidity when i was younger and for the sake of the kids i agree and never wish death even on my enemy ... but deff prayers brotha and i hope everything works out for you my brotha ... peace n love matt keep it rad stay safe and build on my brotha l8z ps i know ya dont know me but if u need to vent as that has helped me in the past by all means msg me n i will gladly consul with you my brotha as life is really hard right now i know (im disabled broke back in 2 spots n neck in 1 ) but it always helps to have a friend or even a stranger that will just listen n not judge or someone to relate to what you are going threw , n e ways ttyl fam hope all works out for the best 💪 💪 ✌ ✌
I appreciate that. Venting definitely helps. I've done my share of it over the past week, probably more so lately do to the amount of stress and anxiety about what these girls are going through. It's certainly heartbreaking to see.
I hope you make a full recovery. I've seen second hand how tough it can be. Definitely takes a strong person to push through.
@@cmattdabrat thanks and i prey all goes well for you and your family aswell cuz them girls need mom and dad and it is heartbreaking they have to experience it but as u say it will ultimately make stronger ppl but its always a mess up thing that kids have to experience stuff like that at a young age and us as parents try so hard to sheild them from hardship and heartache so it really sux when we just cant control for lack of a better word what they go throu or see or experience .... peace n love my friend i look forward to hear that everything is looking up for yal l8z fam
Hope you are doing well dude
Doing better. Will be back soon.
If the valves keep bending because of heat, what about moving the turbo to underneath the vehicle or like a rear mount turbo?
The exhaust valves experience the most heat, regardless of location. So my thoughts are they're getting too much and we're designed for that amount of heat. Causing them to expand and seize.
Valve stem clearance is the issue not material.
I agree. The sodium filled valves will help some as well with heat dissipation. Just need to get the head to the machine shop.
Mat, Mat…Mat. Boy you are one tough kookie!!! Im sorry I jinx it in calling the cruze the money pit. But in the good side i do enjoy watching your journey to get the most hp out of the cruze so dont give up cuz i wanna see some serious hp come out of that proyect
I appreciate that. I'm not going to give up. Just wanted everyone to be aware what I'm battling. Does help to talk about it too.
The second MUST DO thing on 1.8t 20v VW engine for getting any decent power out of it is to remove the sodium filled valves, not sure how they would help your case.
Should help with heat dissipation. But we'll see. This is really a first for the power numbers I'm shooting for. 200-250. Been done, but now that we're getting up to 20 psi of boost, it changes things and those exhaust valves are seeing a lot of heat.
Hey, just checking in, hope you have been doing well
I appreciate it. Things are getting better. Took a turn for the worse for a moment there, but things are looking up.
So are the valves sticking because of the heat? I would not thinks so with loose guides. Also did it bend all 8? Did any just get dropped from the keep/retainer failing? Best wishes.
All 8 were bent. I'm a little stumped. I'm guessing it's either an oiling issue, the valves getting hot and tuliping...? Not sure because I've check clearances. It's just like they'll stick open and get bent. None of them had dropped. The pistons have just bent them over. So nothing catastrophic. Well, aside from having to pull the head and correct the issue. The intake side was just fine, but the intake valves are chasing the piston down, vs the piston chasing the exhaust up.
@@cmattdabrat I forget but did you put stronger springs?
Check those cam phasers that you locked out.
I did. They're still locked. I took the head to the machine shop and they're going through it. I'll report back once they get back with me.
any chance we can get a cost to date before i pull the trigger
I'll do that in a future video for sure.
Hey brother. I think possibly you may be getting not only heat issues but valve float. Basically I think your valve springs may be too weak. And when your in boost they are not closing fast enough. Sorry for you having a rough go right now. I went through a lot of rough stuff during the end of 2021 and beginning of this year. I know what you are going through. Reach out anytime if you want to talk.
Thank you Dave. Could be. I'll have the machine shop set them. They're 65# springs and both times it happened was just during normal driving, oddly enough.
@@cmattdabrat Are they single springs or dual springs? Meaning is there another spring in the center?
I sent you some results on Facebook messenger, finally did the diesel cruze's new tune
I saw that! It put down some awesome numbers!
Wow! Crazy it literally bent every valve. Damn man, you are finding every single issue these engines can have. Not the way you want to have more content! I'm really sorry about Shannon. Awful about your kids' mom as well. Life has a way to put us through the ringer. Obviously all of us will understand if you don't have as much time for the content. Not that you need our approval. Best of luck dude.
Thanks! We'll get her sorted. Playing with the car is a nice distraction / break from work, and some of the heavier things in life. It does hit hard though when that distraction becomes a PITA lol. It definitely sucks seeing them in such a fragile state, but all I can do at the moment is just hang in there.
Hi Matthew I'm not filling good about the valve training .and I wish the best for your wife
I appreciate it. We'll get her sorted out in due time while making sure the family is good. :)
Take off what you need to take off to easily get to the head. Try not to take shortcuts, especially when in comes to the engine, because it just increases the chances of mistakes or something getting nicked or bumped or just going wrong.
You're absolutely right. I'll be sure to do it right. I'm not afraid of the work involved. Just would be nice to have that easy button with everything going on.
You dont have to patch it. If the motor is broken and inoperable they have to replace it. The bearing clearance test fails automatically if the motor wont turn over.
I don't quite recall what you're referring to, but I trust your word lol
Hey brother, I just wanted to check up on you and your family. I hope things are looking up for y'all.
Hey Joe! I wish I had good news to report. TBH, they told Shannon she has a 65% chance passing away within the next 3 months, and the doctors wanted to talk about setting up hospice. Definitely was a devastating blow to our hopes, but we still have hope and she's fighting, and we're fighting for her! Lisa seems to be doing a little better. Her heart's operating at 10-15%, but she's a fighter as well. I'll keep you guys posted. I like to keep things light tight and bright on the channel, and it's been tough lately and can't really fake being happy at the moment. More anxious than anything, in which I had to seek therapy it got so bad.
@@cmattdabrat y'all keep on going brother. I can't imagine what you're all going through right now, I understand pain, hurt, and loss, but I don't know your pain right now. All I can do is send my good vibes out to y'all. I genuinely pray that everything works itself out. I can't offer too much but if y'all need anything, reach out to us here and I'm sure your community will step up the best it can.
@@JosefTrull I appreciate that.
We have same exact name. Scary…
But... my Name is Matthew Chevalier and yours is Aaron Owens? lol... I have however seen people with the same name.
Hey what's going on. I wanted to talk to you more on the live stream. Hope your doing well.
Hey Dave! Had just dropped in to say hello. My emotions have been up and down with Shannon passing. Some days are better than others.
Timing ?
I had everything installed straight up, and used my timing tool kit to make sure it was on the money.
dude after 2 years
Yup. It's a project for sure. Go back and look at my V8 bug build. That took 6 years. All just for fun. We'll get it sorted.
I'm starting to think these Z18XER engines cannot handle boost. I've never seen someone with such bad luck :(
It handles boost just fine. I just keep finding all the weak points, which have been minor set backs. Just more time than anything. First I had overlooked the PCV system. Never boosted anything. Decided to go bigger. With the bigger cams, I personally played with the VVT. So that was my bad. The cheap engine, put a cheap timing belt on that flew apart at 8200 rpm. Should've got a quality belt. Would more than likely still be on the road. These past 2 times, I suspect it's my cheap timing tool. The original one I had that fit snug, couldn't find the second piece. Bought another and it had a lot of play, so the exhaust cam was defiantly advanced. Looking into the tension too. It was from a cheap kit.
Once I get it back together. I'll take my time with it. Give it some proper break-in miles and then see what'll do.
Are you ok?
Just been taking care of Shannon. I'll have an update video soon.
@@cmattdabrat good to here I hope Shannon recovers from what ever she is going through. Sending speedy recovery vibes
Gave you $5 wish it could be more. Find a car guy that is willing to help you though this. Their knowledge and expertise was invaluable though my builds. Plus I think a side kick would help grow your channel
I appreciate it. I wish there were someone that wanted to be part of the channel that were close. Sure would be fun.
@@cmattdabrat if you were in the Seattle area I know plenty of people that would help! Maybe a possible location shift to be around like minded people is in your future. Florida/Texas are hot spots
K swap it please
LOL, can't say it hasn't crossed my mind. Just more $$$. We'll get this platform working. It's just been a pain in the neck.
@@cmattdabrat I know its pricey dude ...was just a thought...love the channel all the best for the future
Honestly 8000 rpm is spinning the stock crank and valve train way too hard.
It was the cheap timing belt after all. Switch to a Gates from Autozone, no issues. It was stretching and eating the belts I've tried. I don't think spinning it that high is much of an issue seeing as it's an OHV flat tappet cam setup with buckets. Similar to the setup of a 2JZ. I also have springs to handle it.
Here's the same engine, but the 1.6 variant. th-cam.com/video/0lc8WUrt0Dg/w-d-xo.html