Panamera Bumper Removal - How to Remove Your Porsche Front Bumper
ฝัง
- เผยแพร่เมื่อ 8 ต.ค. 2024
- How to remove Porsche Panamera Front Bumper.
This video will cover all of the steps required to remove the front bumper from a Porsche Panamera. The front bumper has to get removed to change the air filter, access the horns and clean out the radiators.
To remove the Panamera bumper you will need the following tools:
Plastic pry tool
T25
T30
Socket
gloves
Tarp to place bumper cover on
Check out my other tutorials on how to repair/maintain your Porsche! Please like and subscribe and leave any comments below! Thank you!
Be sure and remove the headlight washer tube on the right side below the headlight before pulling the bumper off to far. Has a small plastic clip on a tee fitting. Hoses are a bit stiff and the tee will break.
Old vid now, but thanks for posting it. I never would have found the 2 bolts under the wheel well liner. Took me 2 hours and it will probably go faster next time. It is highway robbery that places charge 4 hours of labor for this.
Great video, thanks. Removal is pretty forward straight and designed to be done quickly. 2 connectors behind wheel well liner on drivers side: marker light + sensor/lights. 3 on passenger side: same + washer. As mentioned, plastic T will brake easily. BEFORE moving bumper, disconnect washer line higher up right behind wheel well liner. Reconnect there too. This prevents any stress on T. Good luck!
Very helpful info, but what a pain in the neck. Did my first air filter change today. Getting all the connectors disconnected and then back together while balancing the bumper was hard.
Bro why in gods name would they make it this difficult to change the air filter.
so you have to take it the dealership. $$$$
Yea very challenging lol damn bastards
Nice how to's!Could you do one on how to remove the rear bumper maybe??
Sure, I will try to get it up shortly
Damn. I guess I’ll just have the dealer do it. I know I’d mess something up
what year is that Panamera?
Save $900 and do the intermediate service yourself. JuSt habe your Dealer change the brake fluid 😂
All of this in order to swap out a filter element. Ridiculous,
my thoughts exactly. absolutely insane design from the engineers
@@TavitsPhotography Not completely. The low profile nose of the car and huge air filter doesn't leave much of a choice!
No one should have to this much to replace an air filter
tanx
Stupid design. No brain designer must have designed the air filter location
honestly you sound like me. please help I took it apart and I don't know where the 2 shims go??? its on your vid at 1:18 please help
Pretty sure you're referring to the shims that keep the bumper in place at 2:07 in the video. The item at 1:18 is simply a screw.
its not the steel brackets at 207 its these shims heres the picture I believe I saw one under the fender liner at 118drive.google.com/open?id=1r-k24zO9ppJnH8QeZBNDPu7oD99ljW4J
I got it perfect he's god thanks for your help you're the man!!!!!!!!!!!!!!
this is ridiculous . Porsche designers should be ashamed . there is nothing simple about this . Outrageous ...
Lo koki lo o lo Kiki