The SMD D'Amore Engineering AD-1 Amp Dyno is just like the Honey Badger. It just doesn't care. So I just love an amp that i can test over and over and over again without any issues at all. This amp did great! Just so you know, Certified mode stops the test at 1% distortion. Uncertified stops the test at clipping. Dynamic Burst RMS is NOT "Peak". It is something more of what you can expect with actual music. It is still RMS. Thanks for watching if you did! Don't forget to check out my meaningless collection of small photo's and video clips at instagram.com/meade916 and hit that follow button for more!
I can't believe after all this time you still have to explain this. thank you for posting these videos I love the audio equipment you show it's always top notch
Could you pull T/s parameters off that sub because everything I've seen with deaf bonce subs as far as T/S parameters an what they say the sub does doesn't match an there zero sub Enclosure specs anywhere for them ...
Steve, from the team over here at SoundQubed; THANK YOU! We really appreciate you taken the time to review our Q1-4500V2. Great video and you said it best; Reliability. That is what matters in this environment of Car Audio these days and exactly what we wanted to provide to our customers. Reliability with style. That is why we designed the amplifier with a the plexi-back from the get go!
@@JohnDoe-vj9wn This amp made over rated power, @ 14 volts. Why does it matter how often people run this amp @ 18 volts? Its nice to know you can, if you want even more power!
no problem at all! Like i said, if i can put an amp on the dyno and test it until my DYNO gets too hot (before the amp does) that is a solid product. I hate putting an amp on the dyno and watching it go up in smoke after one test. This thing is the truth. I feel like i should run it again at 16 and 18v :D
That amp was killing it !! I really do like that companies are switching to plexiglass for the backing now days, love me some gut shots!! Thanks Steve!
I have been a SoundQubed fan for a while now. I had 3 HDS3 10s on a BC5500, switched the 10s for 2 15s. Then I switched out the BC5500 to 2 Soundqubed 2250s. They also do some work. On the meter, I pulled 5126 watts from them rising to 1.3 Ohms each.
I have always liked SQ. I use two of their HDS 12s (with the cast baskets) in my home theater. For around this wattage I feel this amp is a little bit too expensive.
Much less of a surfboard than the gen1 I bought years back. No complaints with any of the Soundqubed amps I've had. Just don't try .25 ohms, they don't agree with that.😁
You need to get a aak Deafbounce 4000.1 or a 5500..1 those amps are monsters as well , running my aak 4000.1 @1/2 ohm all days on my svl 15 avator sweet sweet combo
Hello Master! What power supply use You for this car amp test? Can You make video for him? Battery and battery charger combo or toroid transformer with rectifier and capacitors?
Is this the 1st company actually printing "RMS" power on their boxes rather than Peak power?... it has frustrated me and many MANY others for years with that
Deaf Bonce 4515R your wrong have 4 of these subwoofers and those amps are a baby for one of these subwoofer those subwoofers can handle more than 10,000 rms without a problem each one that amp that you have there is a baby
these subs do not take 10k daily. Stop. Post up your 4 15's on 10k each daily, lets see. You have a phone and a camera...and a YT account.. Do a 1 minute walk around. Show us.
@@meade916 and who said I was saying daily in competition is 30 sec and it holds up good why don’t you put the test in prove so you can see they do hold 10k rms looks like you know nothing about these subs
@@oscarcorazondeleon2316 I'm sure it can take 10k for a short amount of time. You implied that it can take it all day without a problem. Now lets get to the "looks like you know nothing" comment you made. LMAO. Look at you. Look at the NOTHING you have ever done in your life. I have decades of experience. You have a youtube channel and a smart mouth. No system. LOL SMH
@@oscarcorazondeleon2316 where is your video? Lets see your system. I gotta see your 4 15's in action. Don't even reply to me until you post up. Show me what someone "who knows something" owns. I'll wait. With popcorn and a soda.
The SMD D'Amore Engineering AD-1 Amp Dyno is just like the Honey Badger. It just doesn't care. So I just love an amp that i can test over and over and over again without any issues at all. This amp did great! Just so you know, Certified mode stops the test at 1% distortion. Uncertified stops the test at clipping. Dynamic Burst RMS is NOT "Peak". It is something more of what you can expect with actual music. It is still RMS. Thanks for watching if you did! Don't forget to check out my meaningless collection of small photo's and video clips at instagram.com/meade916 and hit that follow button for more!
What kind of spl we getting?
I can't believe after all this time you still have to explain this. thank you for posting these videos I love the audio equipment you show it's always top notch
Could you pull T/s parameters off that sub because everything I've seen with deaf bonce subs as far as T/S parameters an what they say the sub does doesn't match an there zero sub Enclosure specs anywhere for them ...
I’m glad to see SoundQubed getting some love!!
What about that deaf bounce 20k Amp is that a good Amp for 2 4515 deaf bounce woofers
Steve, from the team over here at SoundQubed; THANK YOU! We really appreciate you taken the time to review our Q1-4500V2. Great video and you said it best; Reliability. That is what matters in this environment of Car Audio these days and exactly what we wanted to provide to our customers. Reliability with style. That is why we designed the amplifier with a the plexi-back from the get go!
They strappable ?
@@_TNB3 yup I have the q2200v2
How often do you see people running 18v setups?
@@JohnDoe-vj9wn This amp made over rated power, @ 14 volts. Why does it matter how often people run this amp @ 18 volts? Its nice to know you can, if you want even more power!
no problem at all! Like i said, if i can put an amp on the dyno and test it until my DYNO gets too hot (before the amp does) that is a solid product. I hate putting an amp on the dyno and watching it go up in smoke after one test. This thing is the truth. I feel like i should run it again at 16 and 18v :D
That amp was killing it !!
I really do like that companies are switching to plexiglass for the backing now days, love me some gut shots!! Thanks Steve!
I have been a SoundQubed fan for a while now. I had 3 HDS3 10s on a BC5500, switched the 10s for 2 15s. Then I switched out the BC5500 to 2 Soundqubed 2250s. They also do some work. On the meter, I pulled 5126 watts from them rising to 1.3 Ohms each.
niiiiice!!!! Send me some pictures!
900k Congratulations ! Congratulations ! Great job indeed from SMD
Loved my 4500v1 had it wired to .5 for a few years an never had a issue. Would love to grab 2 of these.
I have always liked SQ. I use two of their HDS 12s (with the cast baskets) in my home theater. For around this wattage I feel this amp is a little bit too expensive.
😮 damn that amp and speaker is a beast 💪
Awesome test and props for the old school Too Short!! Yeah Boi 🤙
That's just some crazy flex there my friend.
These amps are honestly great So far its been one of the best amps I've ever own when you speak dollar x watts they are just great.
The q1's are regularly ran at .5ohms.
Loved their 1250 amp with my sa12
I almost yelled when your hand went past that steak knife
Much less of a surfboard than the gen1 I bought years back. No complaints with any of the Soundqubed amps I've had. Just don't try .25 ohms, they don't agree with that.😁
not many amps enjoy the .25 life but we get why people run them like that.Thank you for the support!
Beautiful. Gotta get me one of these.
Underrated beast, I have 2 of them
The Steak Knife is back! 🤘🏼
Wow, it’s taking almost 4k free air!
That amp is really nice looking
Would have been cool to see what it would do at 18v on the dyno. I don't doubt it would do their rated power tho.
Seemed like it man handled that woofer which is saying a lot.
You need to get a aak Deafbounce 4000.1 or a 5500..1 those amps are monsters as well , running my aak 4000.1 @1/2 ohm all days on my svl 15 avator sweet sweet combo
That's a pretty clean a amp right there.
Thank you!
Pretty cool 😎 that beast has duel power inputs .
You the Man Steve !!!! Bump that shit !!!! Homie …. 🔊🔊🔊🔊
looks like a good amp to push 2 sundown audio x10s
Sound so dope!
I just got a 6k amp from soundqubed thing is a beast
Steak knife!
Steve if have old amps,speakers,wiring, anything that your not using or going to use you can donate it all to me I be happy to help
Very nice
18v run
Where is the frequency setting at 80hz?
Thanks for the videos
Show us your test bench set up
Wish I had the money to get one
Could you test the fb audio from Brazil?
Dam Son, I love the look of that sub
Tbh I never lift a woofer that heavy in my life. My sound right now is about 5lbs a sub lol I wish I can afford that kind monster sub.
Could you play your son’s beats to get around the copyright?
Hello Master!
What power supply use You for this car amp test?
Can You make video for him?
Battery and battery charger combo or toroid transformer with rectifier and capacitors?
Only amps i run
I have a rockvill krypton m5 2000 watt rms amp and there's nothing on TH-cam I was just wondering if you could demo that amp
COLUMBIA SC IN HERE #ALLMYLIFEBASSHEADZ
Is sound Qubed an good?
been around for 20+ years
Yup Thier great
Yep. Subs and amps are great.
Gonna have to recalibrate Steve here.. hehe
What’s up bro how are you ? Say bud I got question for ya ?
Could i request you do a video on the orion hcca 124 subwoofer
Them 4515r. No joke 😊
Nice amplifier ❤
Have you done dyno on Arc Audio X2 2500.1
. I would like to see if..
How I get you to install my beat . ??
I got a 1966 Impala convertible
Insano esse subwoofer
Is this the 1st company actually printing "RMS" power on their boxes rather than Peak power?... it has frustrated me and many MANY others for years with that
How do u break in subwoofers
Throw it through a window.
Do you have anything on shallow subs? I got a 14 tundra and can’t figure out what I want to do
Strappable ?
Yes
#BOSSMAN 🔊🔊🔊🔊🤝🏾I'm late but I'm in the building 💪🏾
Where did you get your passive radiators for your towers
They don't make them anymore there accented audio
Nice amp
Bad ass sistem bro like 👍
What's name of song 1:42 please 🙏🏼
The sub weighs more than some ppls gf 😅
any amplifier for media that is competitive that you recommend?
Take a hike
i need help i have a 2015 navigator can i put in a jvc double din with out anything messing up
All things are possible with dremel
Почему то усилитель берёт впритык по мощности без запаса, не учитывает возможные просады и рост импеданса. Вроде серьёзный дядька.
Not gonna lie…that amp looks sexy
Thank you!
pshpy morrison his this channel referance :DD
@4:59 what's the name of the song?
Too short Ghetto
🖤
I need a SMD steak knife 🔪 🔪🔪🔪🔪🔪🔪🔪🔪🔪🔪🔪🔪 so I can open up boxes like a pro!!!!!
I bought one, they're pretty nice!
I have one as well. It is pretty nice.
Gawd damm!
Smd fábrica até facas kkkk show 👏👍
👏👏👏👏👏
Deberías ponerle subtitulos en español a tus videos
👍👍
Steve, very good content friend, you can send greetings to my friend peter venegas, we are very fans of yours we love car audio, greetings friend 👍🏻
If you need some songs that are non copyright but also have bass check out my stoner mind/my other mind.
Would you ever try a skar rp3500?
Nice amp...Nice tunes....Too $hort.The Ghetto.
It looks like a Neodynamic brand amplifier
Deaf Bonce 4515R your wrong have 4 of these subwoofers and those amps are a baby for one of these subwoofer those subwoofers can handle more than 10,000 rms without a problem each one that amp that you have there is a baby
these subs do not take 10k daily. Stop. Post up your 4 15's on 10k each daily, lets see. You have a phone and a camera...and a YT account.. Do a 1 minute walk around. Show us.
@@meade916 ok 👍
@@meade916 and who said I was saying daily in competition is 30 sec and it holds up good why don’t you put the test in prove so you can see they do hold 10k rms looks like you know nothing about these subs
@@oscarcorazondeleon2316 I'm sure it can take 10k for a short amount of time. You implied that it can take it all day without a problem. Now lets get to the "looks like you know nothing" comment you made. LMAO. Look at you. Look at the NOTHING you have ever done in your life. I have decades of experience. You have a youtube channel and a smart mouth. No system. LOL SMH
@@oscarcorazondeleon2316 where is your video? Lets see your system. I gotta see your 4 15's in action. Don't even reply to me until you post up. Show me what someone "who knows something" owns. I'll wait. With popcorn and a soda.
My Memphis 4 ch 1200w Amp knobs are chinese and broke very disappointed
Pretty cool 😎 that beast has duel power inputs .