Causes and Fixes Toyota P0012 Code: Intake (A) Camshaft Position Timing - Over-Retarded (Bank 1)
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- How to fix a Toyota P0012 Code, "Intake (A) Camshaft Position Timing - Over-Retarded (Bank 1)."
Toyota P0012 Code Posible Causes:
Bad camshaft variable timing solenoid
Bad variable valve timing actuator
Low engine or bad oil
Worn timing chain or belt
Failed timing chain tensioner - แนวปฏิบัติและการใช้ชีวิต
I watched your posting and solved my problem. Thank you, Sir! 2009 Toyota Camry 307,000 miles. Low oil pressure light came on, and check engine light with the 2 codes. Turned out the oil filter very dirty and clogged up and triggered everything else. After replacement and new oil, all lights went off and back on the road. $$$ saved
Where do i locate that please. Have the same car with similar issues
Hello
Thank you for such a straightforward, easy to understand explanation and video. Very helpful. We appreciate you.
Thanks a million. Eases my mind and seems easy enough, unless it's the trimming chains of course.
this was totally clear and understandable, thanks for this dude!
GREAT VIDEO, as I've been searching this issue for awhile now.
My story:
I've had the engine light and traction light on (and off at times) for over 4 years for 2011 Camry starting in Fall 2019. Estimate at that times was near $1600...and without any car / driving issues, just let it go. And with COVID.....never did anything
Now, 2023 for at least 6M, they are ALWAYS on, and I just failed the inspection test and when they tested, P0012 is now another new code that has popped up. The lights USED to come on/off....but now steadily on.
Car runs GREAT, I have never noticed anything, highway, or around town driving, STILL.
Wondering if it is just a sensor issue, or possible the oil valve, since the oil was "filthy" in 2019 when this first popped up, and the oil change, took care of it.
Any thoughts on how to proceed? As I am starting over with service w/new mechanic shop. Thanks!!
Did you solve your issue?
This code popped up on my sienna. I just took it to the mechanic this morning. We'll.see what they say
My son got the p0012 code following the low oil light. As well as some clunking sounding like the timing chain in his 03 camry. He immedietlt shut it off and we changed the oil and the solenoid your talkimg about and the clunking sort of went away but u can hear it sparingly while idling. Is it possible the chain can fix itself after the fresh oil change or do you think the chain should be replaced? I figured the oil went low and the chain ran dry for a short period but after adding the oil it relubed and is ok. Is that possibe? Any help would be appreciated.
Hi there i have a Toyota CHR with P0012 we have changed everything on the timing gear OCV valves cam solenoids timing chain and guides engine flush and new oil and filter checked OCV wiring to the ecu and pico scoped the solenoids
and ok after 3min driving fault comes back on same fault any suggestions on what to check next much appreciated
my 2010 rav4 cam sensors are very tight. Any advice on loosening? the top part only moved.
My oil light came on and I tripped this code on my 2006 Corolla Le. I just had an oil change 3 hounded miles/week ago and I added AT205 for second time. Not twice. I did at205 after 2nd to last oil change then recently after oil change added 6oz of it again. I think that caused the problem. What should I do?
Good day. I have done all the things.on my Toyota ae111 4a engine and it still overheating what should I do
My car is in chck engine
It shows in the scan has problem hr can u help me
Hi there have a Toyota CHR and fault code P0012 have replaced all the timing chain also guides OCV Vales actuators on cams carried out engine flush changed oil and filter.Checked wiring to ecu and ok no short fro ground problem also scoped OCV valve and ok but fault still there nothing else to replace on timing your would be much appreciated thanks
Anything I say here is a guess, but if the parts are good and there are no other codes, it's usually in the wiring. There can be engine-specific problems, such as certain passages getting blocked or other known problems that only that engine has. I would try to find an online forum or similar that has a lot of knowledge on your engine.
Just had p0012 show up on a '13 Sienna we just bought. Van seems to be running great, so I'm really hoping a bad sensor. I just checked all the control valve resistances and they are within spec. So should I attempt to clean the intake VVT sensor, or just replace? Also what about the VVT sensor filter? If it is very dirty could that throw a code? I have no idea where that bugger is either...
Checked the VVT sensor filter too, that might be dirty (clogged)
Hi there from Canada !Im also hvac technician🙂
My car cranks but doesn't starts.
Intake oil control valve bad ,can it cause the car to not start ?Thank you!
It may be possible but usually a bad VVT solenoid causes the engine to have less performance or run rough.
@HVAC Mechanic thank you!
@@alexandrumotinga8679🎉
What if there is also C1280 popped up on RAV4?
Is this a expensive fix?
It could be because there's low oil pressure in the engine too.
I having a toyota Estima 2012 model ACR50,after replaced The piston ring ,head gasket,all time marks are correct ,but after 3km of test drive ,check light on with fault code p0012?timing chain ,ocv ok,what should i do?
It is hard to say, but if the variable valve timing is good, I would check the wiring.
@@HVAC_Mechanic
Which Part of The wiring i need to check?
Had this problem checked oil good… wiggled wires light went off 😂
what wires did you wiggle?
@@0xdaiki the ones around the solenoids
Location