Jeep Wrangler YJ - Upgrade to LED Turn Signals. Plus we have an issue!
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- FixJeeps Amazon store (Affiliate): www.amazon.com...
Link to Power Addicts website Jee YJ directory: www.poweraddict...
Fix Jeeps website: www.fixjeeps.com/
TH-cam Home Page - / poweraddicts
Get a T-Shirt: teespring.com/...
Free Amazon Prime Trial (affiliate) - amzn.to/2nknmBE
Equipment used to create videos:
Canon Rebel EOS SL1: amzn.to/2q7AEDf
Canon EF-S 18-55mm f/3.5-5.6 Lens: amzn.to/2q7tb74
Sony ActionCam AS30: amzn.to/2pm7x1v
Sony HandyCam HDRPJ440: amzn.to/2pB0aQ6
ION Air Pro: amzn.to/2qtyQXY
Various Camera Tripods: amzn.to/2r3OjLh
Dell Latitude E7450 Laptop: amzn.to/2r23rYV
$ave Money! : • Save money on Jeep par...
Power Addicts Playlists
Jeep fix & Repairs - • Jeep fix and repairs.
Jeep Sensors - • Jeep Sensors
Jeep YJ mods - • Jeep YJ mods
Wrangler YJ Maintenance - • Wrangler YJ Maintenance
Jeep Fun - • Jeep Fun -
Wrangler YJ Drive shaft repairs - • Wrangler YJ Drive shaf...
Tools, mods & Creations - • Tools, mods and creations
Automotive Tool Tips - • Automotive Tool Tips
Motorcycle Playlist - • Motorcycle Playlist
Mustang GT - • Playlist
#jeepyj #yj #jeeplife #poweraddictscrew #jeepwrangler #poweraddictsyoutube #jeepwrangleryj #jeepwranglertj
I finally got around to doing this on my 93 YJ.
Great video. The LED lights look so much better. The only thing that was a pain in the butt was getting those flashers in place underneath that dashboard.
Hey, Chuck. Thank you so much man. This video helped me fix my flashers and turn signals, a problem I'd been trying to figure out for months! The electronic modules with the ground wires did the trick. Thank you!
I just had the same problem and figured out that if you do not change your 194 side markers over to LED also they will give you that problem. You can test it by just removing the 194 bulbs and then turn on the lights and try the turn signals. It solved my problem!
These are great videos. I like how you take time to explain how everything works as you go.
Glad you enjoy them!!
Thanks, great video! Just finished upgrading my '93 YJ to all LEDs. I didn't have to replace the flasher two years ago when I replaced my fender flares that came with LEDs, but knew I would have to when upgrading my tail lights. That said, I attempted to upgrade my front turn signals/markers first (to 1157 amber LEDs) and this also would require the flasher upgrade - the brightness is well worth this upgrade! All that said, for complete LED replacement (front side markers, front marker/turn signals, and rear tail lights), you will need to replace both the Turn Signal flasher AND the 4-Way/Hazzards flasher to the EF32RL with ground wire for the lights to work properly. And for some reason the flashers are clocked with the two prongs toward the bottom like a "V" - no biggie (once I figured it out).
Did you experience the signal lights still illuminated on your dash after the complete LED conversion like in the end of this video?
I did a similar job on my 94 yj , tip: I took the plastic housing and gave it a thorough inside wash (a small paint brush works). THAT made a huge difference, made the leds even brighter. thanks for the flasher tip
Now I know why I've never had signals for the last year since I bought my YJ, thanks Chuck!
Every time you work on your Jeep it makes me want one. YJ is the only wrangler I want... and they aren’t easy to find in decent shape. Time to go check Craigslist though.
Get ya one!! They are fun rigs to drive and not crazy difficult to work on.
Thanks man. 1994 Jeep YJ
I always appreciate your videos and the time you take to go through the details. I have all LED lights and upgraded the flashers. Everything works but now I have a new problem. My LED headlights also function as a turn signal. They come on fine but once the turn signal is engaged, it stays Amber and will not turn off. Worked before. Anyway, I simply disconnected the flasher from the headlamp and I am fine without that feature. I love the brightness of the LEDs and the sleek look. Also I had no issues with the dash turn signal lights.
Thank you!
Chuck you are the best, thanks for all of your help. Just upgraded the tail lights 87 YJ and now the stop and turn signals don't work just ordered the electronic flashers you recommended. Hopefully this will fix the problem. I check on your videos each time when upgrading or fixing the YJ
Having the exact same issue with my LED upgrade once headlamps are turned on. Yet, for me when headlamps are in my signals go wonky and won't functions at all to include rear. I've upgraded my 91 YJ to LED all the way around the Jeep to include adding LED's to the side and back of the hard top. Even installed the flasher upgrade with ground wire. My research indicates the front turn signal/marker lights have a "floating" ground when using the turn signal with the headlamps in the on position. The supposed fix is as you indicated the addition of a resistor in the front turn signal wiring. I've yet to give this a go. I took the easy out and just replaced the old bulbs for the moment. Looking forward to seeing your fix!
i’m having your exact same issue right now, please let me know if you found out how to fix it
Just wanted to give you a thanks for the videos love watching them and very helpful.
Glad you like them!
I have a 1995 Wrangler, it has a 5.3 liter Chevy motor in it, its awesome and I love it. When I bought it and when the headlights were on one of the indicator lights would show up on dash how you described is your Jeep. My jeep already had LED tail lights and Headlights. I figured it was a bad indicator bulb, I tinkered with it and it seemed like a bad connection because then it tuned on. I went and bought LED to replace both anyways. And then I had two indicator lights on my dash and they would not flash with the headlights on, with lights off they worked fine from the start. This has totally been kicking my butt, I have read everything and so many people have said check your grounds. NOT ONE person has mentioned the Electronic Flasher Module variants. WOW, I unfortunately am away right now for a few months but when I get back im going to try that, that has to be the problem considering everything is LED. Actually my side markers are not LED but they will be. Thank you so much for the video, I will owe you a case of beer if it works.. Thank You!!
Man this was super helpful! I'm dealing with my passenger side turn signals not working when my headlights are on. I have LED Taillights and this might just be the fix.
Very good and funny videos bring a great sense of entertainment!
I did the led upgrade all around on my yj and figured out why you were having the dash turn signal indicator issue. As soon as you upgrade your side marker lights to led that issue goes away just figured it might help you out before you put in the diodes
What bulbs did you use? What “flasher” upgrade did you use? I have a 95 YJ and am about to upgrade the front blinkers and side markers.
Thanks for the idea, I'll definitely try it out!
Upgrade my 92 YJ to leds 3 weeks ago, have the exact same problem, still working on it. I have the same flashers that you have.
I haven't messed with it yet. I'm about convinced it's a bad ground connection somewhere. I say that because some times when I hit a bump the dash lights work like they should. Then I hit another bump and they act crazy again.
Looking for the solution on the signal light indicator staying on the dash when the headlights are on. Did you ever post a video for the fix?
Great video. I have installed the flashers above but am still having an issue. I have LED side marker lights and trying to get the LED front turn signal to work. As of now they just come on without flashing. This is with the headlights turned on and off. I'm also going to change the rear to LED's as well.
Hi all. I added the LED lights to the front turn signals and both side markers. Additionally, I added the same 2 LED flashers. All works great less the following. Now, the only time the side markers blink is if the running or head lights are on. Same situation with incandescent bulbs too. That sucks.
Where can iget the electronic flasher one love power adict
Have you found a new flasher or is this the best one you found so far?
Question, I did the upgrade on my driverside tail light so far on my 91 YJ. However, when I turn headlights, the running lights turn on, except when I press on the brake the talight does not brighten. Everything else seems to operate fine, left blinker, hazard, and works as expected when headlights/running lights are off. Could it be a ground issue? Or maybe is it b/c passenger taillight hasn't been installed yet?
You need to put a diode in the ground for the dash panel I’d bet. I had a similar issue in my Super duty pickup. Either way I’m interested in what you find out; LED’s are my next upgrades.
I haven't fooled with it yet but I'm really thinking it's a bad ground. Occasionally when I hit a bump the dash light act like they should. Hit another bump and they wanna act crazy again!
I changed led front and rear. And changed the two pin relay. I'm getting solid light on blinkers now. Any ideas?
I have seen a reverse polarity adapter for the electronic flashers (it fits on top) sold separately I wonder if it would fix this issue?
I'm not sure to be honest. I'll have to research those. Thanks for the tip to try.
Second question I just had my shock mount break and my mechanic at Charlie's told me that the shocks were too long what is the standard size shock for a TJ 99
Just look up the shock specs for a stock 99 TJ. Most shock absorber manufactures have this info somewhere on their websites.
I need to order these flasher relays, I can't seem to find a link.....
Joshua peters I’m with you man I can’t find it either
Here ya go: amzn.to/3eUNUDh
@@Poweraddicts so, I found the 2 relays on ebay, I have led bulbs in the rear brakelights and reverse lights, front turn signals have led bulbs, front headlights are led as well, it turns out that I have absolutely no issues now, everything works, display works as it should now, maybe I got lucky for once...lol
Had same issues/ wiggled wire to front left flasher and it stopped think loose wire
Hey Chuck, Daryl here... Could you please tell me the part number on those relays with ground wire? And the part number for those tail lights the round light pattern ones? I am doing the complete led conversations on my 92 yj. I have already done hella h4 upgrades, wanna finish it. Please supply those part numbers and where you purchased them from. Thanks Chuck 👍. Keep up the great vids.
Hey man. Hows it going!
Here is the flasher module: amzn.to/2Yagh9z
Here are the tail lights: amzn.to/30gguux
Thanks for dropping in!!
Cool!
Thanks, my next project. Have you ran your vin for Parking Brake recall? My ‘93 was listed as not completed.
Called local Jeep/Chrysler told them the story and they are still replacing them. New parking brake!
Chrysler has the part number for the recall brake part.
I did my recall about 2 months ago, on my 95 yj and works perfectly!
I have an 87 yj with similar brake problem. I reached out to Chrysler and basically told to me to pound sand...ha ha. I removed it then cleaned and oiled the old park brake pedal. It has been working perfect now. However It had gotten serious after I got Home from work one day and found my YJ at the end of property. The brake had popped loose. The YJ had rolled down hill and a small and only mesquite tree had stopped it from going over and down a cliff. The yj would have been desert art forever had it gone over :)
I haven't yet no. I've heard of the recall and thought about it. But I need new cables all the way back to the axle so I need to replace all that first.
I'm guessing I voided mine when I took out the dana 35 and installed an 8.8 from a 2000 Explorer with disc brakes LOL. That e brake doesn't work any better than my old one.
How often do you change the fluids in the transfer case differential and clutch on a 99 Jeep TJ
For the transfer case, there is no direct answer for that. It depends on how the rig is treated. If it is wheeled off road on a regular basis vs just highway driven it will need changed more often. If the rig gets wheeled in deep water it may need changed more often. As for the clutch .. I bleed it and forget it until it starts acting up. That is a sealed system it shouldn't get any contaminates in the clutch fluid system. If it does, then there is a faulty component that needs replaced.
Is there a different between the flasher and hazard plugs. Can you use the same for both of them
hey, I have a 1990 Jeep yj Laredo and 1 of my Turn signals cant fully fit inside. It ends up looking goofy and hangs out further than the other one because its just a tad bit too big to fully put in so either the top or bottom of the light sticks out a bit. I'm not sure what the issue could be.
Do you have any clue on how to fix the center clock in the 91 and earlier YJs? I’ve only seen one ever work and thought it would be cool to have.
Mine quit working also. If I decide to fix it I'll definitely video the process.
Is there a different in using a flasher or hazard relays. Is there a different
Did you ever find a fix for the turn signals in the dash to stay off when the headlights are turned on? Im having the same problem you are.
Good video
Thanks!!
Really liked the video.
Just curious if you have found a solution as of yet.
I am having almost the same issue you were experiencing.
I bought another set of bulbs that has a built in resistor a few days ago. I'm gonna try it when I get a chance. I've tried a few different thing and still haven't gotten the results I'm after. I'm trying to find the right combination of parts instead cutting the wires and putting a diode in the circuit. I'll post a video when I find the fix. Thanks for dropping in!
Hello, did you do the other video for the blinker on with headlight? great videos. Thanks
I have a video coming soon that has blinkers in the headlight if that is what you are referring too.
@@Poweraddicts Did the modification with full led and it's working fine, but when I turn my headlight on, not working anymore. turn signal on and no more blinking.
Hey Chuck - I've got a 95 and a 93 YJ - did you replace the front side marker lamps with LEDs?
Do you have a video on how to trace trace the suction lines for the 4-wheel drive on a YJ
Nope, no video on those. I'll have to check to see if I have a diagram for the vacuum lines. Honestly, I trash the vacuum stuff and install Posi-Loc cables in. I'll be doing a video on installing that in the not too distant future.
The 1 for the front axle is really small and it runs from the driver's side along the firewall over to the passenger side along the firewall and down to the axle. It has a check valve in it right before it goes down on the passenger side. They usually crack and you can temporarily cut that piece out and slide a normal vacuum line over the hard stuff to see if it fixes your problem. I hope this helps!
Having exact same issue with my YJ after LED conversion... dash indicators staying on- curious to see what you find.
I'm really thinking it's a bad ground. I haven't stopped long enough to concentrate on that issue yet. But occasionally I'll hit a bump and the dash lights will work as they should. Hit another bump and they go back to acting crazy again. I'm I'm processing of gathering parts to do some electrical upgrades along with grounds. That may fix it.
Does this eliminate the need for resistors if upgrading the rear tail lights to LED?
I didn't use any resisters on the tail lights.
These relays cover the rear taillights as well? I've seen some videos that replace another relay behind the streering wheel@@Poweraddicts
Put some resistors on the lights.
That's what I've been thinking due to the resistance of the original style bulbs. I just haven't tried it yet.
Hey bud, wondering if you're planning on doing a lighting swap / upgrade to your instrumentation?
Yea, I've got the stuff to do it. Just need to squeeze the time in to get it done.
Different type of relays used on the YJ 1994-95 so this is only good up to 1993
I have a 95 and am having trouble getting the new leds turn signals and side markers to work.
Great video,do you think the Jeep Invasion will happen this year
I sure so. I missed it last year. I'll announce it on the channel if I'm able to make it.
Look at it this way there more arrowdimic than a X-Wing and a tie fighter
I’m having an issue with the blinkers working while the headlights are on. When the headlights are off, the blinkers work, when the headlights are on, the blinkers do not and the two dash blinker lights stay on . Any suggestions?
You gotta ground issue somewhere. Bad grounds are a paint to chase so just clean and reseat every lighting ground you can find.
Did you ever get this figured it out? Was it your ground? I’m having the exact issue.
Why do you talk so much??????
Because I want to.