Fuel Water Separator Installation Guide | Upgrade Your Outboard Fuel System
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- In this video I go over everything you need to know relating to the benefits and installation of a Fuel Water Separator for your boat's outboard. This complete filter installation guide will prepare you to install your own with ease. At the end of the video, I test the fuel water separator filter on the outboard to see how it performs. If you find this type of content helpful and would like to see more, consider subscribing for updates on new videos.
Follow me on Instagram: @MVBOutdoors
/ mvboutdoors
---Product Links*------
Fuel Water Separator - amzn.to/46FxxVV
3/8" Splice Kit - amzn.to/46kk5Hq
Hose Cutter - amzn.to/3PLOIhQ
---Related Videos------
DIY CUSTOM JACKPLATE BUILD
-- • CUSTOM JON BOAT JACK P...
OUTBOARD HYDROFOIL INSTALL & TESTING
-- • OUTBOARD HYDROFOIL - D...
MERCURY OUTBOARD TUNE-UP
-- • 9.9 HP MERCURY FOURSTR...
*Orders through the Amazon affiliate links above provide us with a small referral commission at no cost to you. Using affiliate links in no way affects our opinions expressed on this channel and merely serve as a method to help this channel grow while still providing useful, relevant information. ------------
#bassboat #boating #fishing
Pretty easy install with a ton of benefits. Really with with the Fuel Water Separator (amzn.to/46FxxVV) - Have not had any issues!
awesome
That fuel water sseparator could easily be made into a "fuel polishing" system by adding a standalone fuel pump and some extra tubing, plus it'd also be a fuel transfer setup for if you think some fuel cans in the shed got water contamination
Or if the tank has water and dirt in the bottom
I just bought my first boat 88 ranger 393v with a 87 Johnson V6 150 2 stroke (took the vro off) was thinking about getting a separator living here in humid Florida. I use stabil but I just want to make sure I protect my investment as best I can. What are your thoughts? Watching your video im sure i already answered my question. I have a selector valve so ill just have to route from the selector to the water filter back out tonthe original ball inlet.
It can only help, esp with high humidity. I would say its most important in a humid environment.
@@mvboutdoors thanks for the reply. I have been researching them and reviews seem mixed as alot say the canisters cause or leak. 🤷
I see that this is a fiberglass boat, what did you use to mount? Did you drill a pilot hile with a drill bit then use a slightly bigger screw to mount?
5:31 -- That is correct, that is exactly what I did.
@@mvboutdoors what size drill bit and screw did you use, do u remember
@@stevestewart3816 Sorry I don't remember exact sizes. I just eyeballed a drill bill that was slightly smaller than the screws I had on hand.