2010-2017 f10 BMW 535I REAR BRAKE PAD DIY WITH ELECTRIC PARK BRAKE
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- BMW 535I REAR BRAKE PAD WITH ELECTRIC PARK BRAKE
EURO EUR1473 Akebono EURO Ceramic Disc Brake Pad Kit
amzn.to/2luD3Gs
ACDelco 18K2308 Professional Rear Brake Pad Wear Sensor
amzn.to/2tj5oE4
TOOLS
Ingersoll Rand 2235TiMAX Drive Air Impact Wrench, 1/2 Inch
amzn.to/2JZ31QT
Autel Diaglink Code Reader Full System Diagnostic Scanner
amzn.to/2LwrVpj
Milwaukee 2457-21 3/8-in Cordless M12 Lithium-Ion Ratchet Kit
amzn.to/2Kgp3hH
TEKTON 24335 1/2-Inch Drive Click Torque Wrench
amzn.to/2tgbvJi
WORKPRO Dead Blow Hammer Set 3-piece
amzn.to/2MJqSBT
Performance Tool W80112 X-Type Pad Spreader
amzn.to/2tp4y7Q
ARES 1/2" Drive 17MM Non-Marring Lug Nut Socket
amzn.to/2K8TAKI
8-Piece 3/8-Inch Driver Metric Deep Socket Set
amzn.to/2MNE3le
TEKTON WRN53115 Ratcheting Combination Wrench, 15 mm
amzn.to/2lu2FDq
ENJOY/LIKE/SUBSCRIBE
SUBSCRIBE / subscription_c. .
OUR FACEBOOK
/ performancemotorslindon
WEBSITE
www.pmutah.com/...
No need to have an OBD scanner tool. The parking brake actuator assembly is held with 2 bolts to the calipers. Unscrew those, undo the 2 Torx screws that connect the actuator to the piston and use that same Torx to unwind the piston (turn till you can't go any further). After that you can compress the piston like you would in any other car.
Reconnect the actuator to the piston with the 2 Torx, bolt the assembly back to the calipers and just activate the parking brake. The car will unwind the piston till it makes contact and you're done.
Totally agreed! I don’t have a scanner tool and used this exact procedure on my 2015 BMW 528i rear brakes and it worked like a charm.
Hey Brandon, I can’t begin to tell you how thankful I am that you made this video. I just bought a pre-owned BMW M5 and the brake light went on. I’ve always done my own breaks, but when I heard you had to use the scan machine etc. to do this and also quoted $900 by an automotive shop, I went on TH-cam. Your video saved me man. Just got all the tools/scannner on Amazon for $150. Not only do I save myself $750 extra dollars but I get tools to go along with it and a bad ass scanner! Thanks again!
Yourwelcome Sean thanks for watching my video😎👍
Aw come on...! Using a wire brush on a power tool with no safety glasses..!
Excellent Job! You are a pro! No stupid music, alcohol, profanity, animals, short cuts. We need more good quality content like THIS!
Wow thanks man I really appreciate your comment😎👍
😁😄
Scanners not that much ?? Bro that scanner is $475.
Is there another scanner you can recommend that is cheaper then the Autel
Hello great video! what model Autel scanner do you have ? So I can get my parts ordered and get my brakes done. Thx Michael
amzn.to/3CjpVe5
Thanks for the video man! Once the time comes I will take care of doing this on my x3. Love the fact that you hammer in people should have a scanner. Anyone who has a BMW should have a scanner, in my case I prefer ISTA. Thanks again!
Josh what is the ISTA scanner model you have?
After changing the rear brakes/rotors, the emergency brake stopped working. Any idea how to fix this?
Nice work, you made it easy for me and good camera angles, thank you
Thanks for watching I'm really glad it helped you😎👍
"Just release the rear electric E-brake by sitting inside the car and pressing the [P] parking down. Light should go off. Then remove the two bolts, remove the mechanism. Reverse this process and you should be 💯.
Cut the brake sensor wire and tie them together. Check ALL brake pads for wear every 3 months. You're welcome 🫡✌️
... 🤔 hmm... I have noticed that it is, in fact, still an E-brake (Emergency/ Electric). I don't think it classifies as an "Emergency" brake anymore because it is not cable operated anymore. Cable operation gave one the possibility of coming to a safe stop by not immediately locking up the rear tires, which induced a spinout for some and a wipeout for others.
Question: does the scan tool (particularly the EPB tool) work on Hondas and Toyotas? I've been looking for a EPB and can't find one that works on neither.
Yes to scan tool should work on a Honda and a Toyota to
@@pmutah thank you for the prompt response, good day sir. Blessings
good job ! 👍🏻👌👋🏻🇬🇪🤝
No cleaning off dirt or rust, no anti seize on pads, no cleaning and greasing caliper guide pins?
Hi I got Bmw F10 2014 model. Need to change break pad, just wondering will it work with your device, you have includes link, and that isn’t available anymore or can you give any other device suggestions so i don’t have to do all the hassle with Electronic motor, thanks
Thank you Sir! Finally someone who clearly articulates the process in depth....
You're welcome mark😎👍
What is the part number for the front brake pads, 2’14 bmw 535i
hi, will it work on 2019 BMW X5 xdrive 40i?thanks
Nice video. I did my wife's pads today and used ISTA as I already have it and it set the parking brake in service mode all good but then my piston tool broke so with a channel lock pliers I was able to screw the piston clockwise to retract it all the way in (took 5 mins and was somewhat tight) but that did the trick and I reassembled it all and deactivated the service mode and thankfully it worked. Im just putting this out there as added info for everyone just in case you too get in a jam. Brandon your video was so much better than my on the fly videos that I have done! Great job!
Very good video! Can you please provide the model number of the AUTEL scanner that you used to complete this process?
HERE YOU GO
amzn.to/2LwrVpj
Thank You Brandon!!!
Didn't work for me. Went to a scanner for GM vehicles. Can you identify scanner used in video model no? Thks!
Thank you so much for this video. In regards to the scanner do you need a PC in order to set it up?
Nope you just need the scanner it's really easy to use😎👍
Awesome video. I have always changed my brakes but just happened to watch this before changing my BMW brakes to see if there were any tricks i needed to know about. I wouldn't have known about the electronic parking brake deal. I can see myself braking something without that knowledge and having to do the walk of shame to the dealer for more parts. You saved me. Thanks!
I love this video. Is it the same way of doing the brake job for BMW X5 x35I??
Yes it should be very similar😎👍
Great vid. I have a 2016 750i m sport. Is the process fairly the same. My maintenance warranty is up in June I'm planning to do my own brakes from then on.
Yes it should be similar thanks for watching😎👍
Good stuff Brandon. I have the same model, and will be doing my brakes soon. Glad to have found this video. Thank you!
Thanks John I hope it helps😎👍
Very good job!
Regards from Poland!
excellent detail.. much respect thank you sir
You're welcome
Hey man how’s it going? Just a quick question, I bought that same brand for my 2014 BMW 528i (F10) and was wondering where to find the front brakes as the ones I have are only for the rear. Any help? I’m just suspect of buying through amazon sometimes. Also you got any rotors you recommend? Thanks again
Stoptech front rotors
amzn.to/38eZ8iX
Akebono front pads
amzn.to/39hkigz
I have a 2013 m6 and am about ready to do my rear brakes, i picked up an Autel 906ts...a bit overkill for changing oil and brakes but like you said, have to have one with a newer euro car.
Great video, i have a question...do you have to unscrew the brake fluid cap to compress the calipers ? I watched a couple other videos on bmw’s and i do not recall anyone doing this..? I know all the brake jobs i have done on older cars that had to be done?
Thanks and keep up the great videos !! Have a great day !
Yes it's a good idea to unscrew the brake fluid cap for sure 😎👍
Thank you...have a great day
Hey Brandon thank you for excellent video. I like you go straight to job and work on till you are finish. I saved a lot money by following your video. Have a fantastic day:-))
Hey Brandon, today I have replaced my rear brakes successfully thanks to you sharing. I appreciate you go straight to the points in our video. Thank you for excellent video and sharing our knowledge:-))
great video, does the car need to be in "Neutral" ?
No
Cheers, just ordered scanner, great video
Does all scanners work?
The Autotel interface certainly makes things easier since you don't have to remove the brake actuator and manually turn the screw on the back then reattach the actuator to the back of the caliper, but you can do it without it. 2018 530E Xdrive
Thanks for the video.
You're welcome😎👍
I did mine on my F10 2015, and now I get a few brake errors on the dash but it brakes just fine. Any ideas? I reset the computer and brake stuff again but still no luck.
Great video
Question:
Can i leave service mode if i had no sensor connected to rear pad?
I order wrong break pad kit, but im notice this to late, and i remove old sensor but now im not able to connect back anymore cuz his damage and broken. And now my Parking brake button not working at all. When i hold for 5sec nothing happen. Can pad sensor cause this problem?
When I torque the guide pins bolts, the pins lose their ability to float. Everything becomes rigid. The rotor still turns, but the pins only float when the bolts are loose? Am I doing something wrong?
Have you completed brakes front and back for a M5 F10. Feedback would be great. Looking to try it out this weekend
my rear shocker is banging over bumps like the shocks is bottoming out thats my next job
Brandon, nice video, thank you. Does that scanner support brake fluid bleeding?
Hi Brandon, can you reset the brake service interval with the scanner, there is another youtube video showing this ?
Hi .. thanks for the video ...can you send me a link to order that scanner
amzn.to/2nBXjKA
Thanks for the link ...My car is 528i xdrive 2015 i want to replace brake pads
Awesome this scanner should work good and it will perform any other functions that you may need to reset on your car. always good to have a scanner😎👍
How are you ...I ordered the scanner in the link you sent below but it doesn't support that function....when i click on parking brake it says this function is supported on this vehicule ...
www.autel.com
See Products /Special Tool/DIAGLINK/
OR. click "more produts" - see #EBS301
OR
click Maxi Service # MST505
www.aeswave.com
Fresno,CA.
Categories /Scan Tools/All Scan Tools
See Autels "MaxiDiag" #MD808 Pro
$249.00
Extremely CHEAP Price when it comes to REAL Scan Tools
Los Angeles County
3/5/2020
What oem brand that you use for the break disks for your BMW F10
Is this good for 2013-2018 BMW M5?
yes the process should be similar just make sure you get the right brake pads😎👍
Thanks@@pmutah
Any help would be appreciated: tried the manual route, but one of the 2 bolts was warped, so had to buy an OBDii tool. Put the actuator in service mode (activated, waited the few seconds with the noise, around 10 secs) and went back to press it in only to find it complete out but still attached. Now it won’t press in... any ideas? Thanks in advance
Sorry man I'm not sure what to tell you you definitely want to put it into service mode before you touch anything on the brakes or remove the caliper
Never replace pads without turning or replacing the rotors.
I bought the Autel and it did not support my 2016 BMW 535i Xdrive M-sport parking brake....ugh
Jon sorry that's weird. it should have worked on a 2016🤦♂️
What is the part number for the front pads?
Hai brother we have a bmw m5 2018 model and it have a hydraulic E brake .
Is it possible to fix a additional drift brake with handle
It's going to be a little tough to do a handbrake with electronic e brake setup😎👍
Nice video well done.
Thank you I really appreciate it
Excellent video, just one question, do i need to replace the rotors every time i change my pads whether you replace the front or rear brakes?
No, you don't have to unless they are worn-out
I was looking to purchase the lisel for my husband and couldn't find the one you showed, share a link
NVM, I found the link, where you replied to someone else. Thanks!
After resetting on the dash, how does it work out in the idrive as to how many miles left on front ones that were not done.
When you reset it on the dash it should reset the mileage automatically in the idrive
Where can I buy the Lisle brake piston compression tool in the video at 3:12.
HERE YOU GO
amzn.to/2tp4y7Q
Do you leave the ignition on and obd scanner connected while starting the wheel removal etc???
Yes when you connect the scanner make sure and have the ignition on position 2 but do not start the vehicle.😎👍
What year is your BMW?
Thanks buddy. 👍🏼🙂
i think you can manually unscrew the brake motor, but you need to remove the motor first.
I think you can take it apart and do it manually but I would definitely not recommend that. I would definitely buy a scan tool and do it the proper way thanks😎👍
It's very easy, take the motor off and wind a single screw in, that's all it takes. Quicker than messing around with the scanner
Hi, do you need to release the electric brake ?
Yes
Nice video
How would I find out if a Autel AL 419 can rewind the parking brake for service?
Paul I'm pretty sure that scanner is their basic one and it does not do the electronic parking brake stuff.😎👍
@@pmutah which model do you use. Looking at Amazon - this model is priced at $119 - is this it? Autel AL619 Autolink Engine,ABS,SRS Auto OBD2 Scanner Car Code Reader Automotive Diagnostic Tool
By the way -great informative vid. I have a 2014 750il xdrive - would this be pretty similar?
Hello,
Greetings from Dublin. I did mine today(brake disks, pad and sensor) but when I did service reset on the computer I only got another 30000km. This is less than 19000 milestones. I was just wondering why this is the case? The service due indicator was showing brake pad change in 1,400km before i did the change.
Great video by the way.
Last note, should say less than 19000 miles.
What rotor replacements would you recommend for the same car. A product link would be appreciated.
What year and model of car do you have and I'll try to send you a link
Hi. My 2013 parking brake stopped working and the parking brake light came on. what do you recommend?
It's most likely a bad actuator or a parking brake module
This model has the actuator right on the caliper, correct?
No need for the electronic tool as you said, just need to turn clockwise the actuator center shaft using a T45 torx until it stops. Don't spend $ on such device.
It's a lot easier just to buy a cheap scanner plus you can use a scanner to to diagnose other problems on your vehicle.
@@pmutah Do you think the reset can be done using a free scan tool on an Android device? I have a decent ODBii scanner. Plan to change the rear pads in my F11 in the next week so glad I found your video!