Carbon Fiber Nylon is MUCH Stronger!
ฝัง
- เผยแพร่เมื่อ 15 ก.ค. 2022
- MY DEATH RACER LIVES AGAIN! Thanks to @LinusTechTips LTTSTORE.COM for sponsoring! WAN HOODIE ▶ www.lttstore.com/products/wan
The DEATH RACER from @TheRealSamPrentice!
His video ▶ • 3D Printed Death Racer...
FB Group ▶ / deathracer.builders
Files ▶ / mrbaddeley $1 Minimum Pledge
SPECIAL THANKS!
@TheRealSamPrentice
▶ / therealsamprentice
@TripodsGarage
▶ / tripodsgarage
@3dgloop
▶ / @3dgloop
@BV3D
▶ / bv3dchannel
@CanuckCreator
▶ / nero3d
MRRF IN 60 SECONDS
▶ • MRRF in 60 SECONDS 2022!
BAMBULAB X1 CARBON
▶ • Bambu Lab X1 Carbon + ...
SUPPORT! 😍
ETSY! ▶ www.etsy.com/shop/3DPrintingNerd
MERCH! ▶ the3dprintingnerd.com/merch
Patreon ▶ 3d.pn/patreon
FloatPlane ▶ www.floatplane.com/channel/3d...
BuyMeACoffee ▶ buymeacoff.ee/3dprintingnerd
KoFi ▶ www.ko-fi.com/joeltelling
GEAR! 🎥🎦📷
Glowforge ▶ 3d.pn/glowforge (aff)
Prusa ▶ 3d.pn/prusa (aff)
Puget Systems ▶ 3d.pn/pugetsystems
Slice Engineering ▶ 3d.pn/slice
MATERIALS 🦇
Printed Solid ▶ 3d.pn/printedsolid
FilamentOne ▶ 3d.pn/filamentone
Amazon ▶ geni.us/shopatamazon (aff)
Matterhackers ▶ 3d.pn/matterhackers (aff)
Proto Pasta ▶ 3d.pn/protopasta (aff)
Nikko Industries 3D Printable Models ▶ bit.ly/3lK0WHi
THE TEAM! 🤟
Host: Joel Telling ▶ / joeltelling
Executive Producer: David Tobin ▶ / david_tobin
The Website ▶ the3dprintingnerd.com
--------------------------------
Find Me Socially!
--------------------------------
Twitch: / joeltelling
Twitter: / joeltelling
Twitter 3DPN: / 3dprintingnerd
Facebook: / 3dprintingnerd
Instagram: / joeltelling
Instagram 3DPN: / 3dprintingnerd
Discord: / discord
--------------------------------
Want to send me something?
--------------------------------
3D Printing Nerd
PO Box 55532
Shoreline, WA 98155
USA
Music in Episodes Comes From:
Epidemic Sound - 3d.pn/epidemicsound
Future Vega - futurevega.sourceaudio.com
Audio Micro - www.audiomicro.com/royalty-fre...
FTC Disclaimer: A percentage of sales is made through Affiliate links - วิทยาศาสตร์และเทคโนโลยี
That's insane, I was not expecting ltt to sponsor other channels!!!
True wtf
Linus said they would do it in a past wan show. Apparently there's a lot more where that came from.
Creators supporting creators!
He is also in floatplane, so they are already conected
can we get someone to plug that leak
the WAN hoodie matches perfectly with the MK3S 😎
Lmao, didn't know LTT did sponsor spots on other channels.
this might be one of the first, might be some collaboration deal
Kind of weird actually. If it was ad for LTT channel it’d make sense, but selling LLT merch instead of your merch, and none of them are clothing channels... Merch is a way to support a creator, selling random merch from ad on someone else’s channel seems off
@@delxinogaming6046 Linus sponsors all sorts of channels. Probably paid quite a bit for that ad spot lol he's quite generous.
I love these functional builds and the use of these more functional (and exotic) materials! More of this please! 😁
I love how collaborative the 3d printing community is
Like how no influencers could name a single legit 3d print farm.
Like how we all requested our influencers to make noise about zero site left in America with operating business services for 19 months, try sell your thing ownership to me. You have to move it to France and the terms they have are called exclusive so you must delete it out of America.
Notice our silent influencers. They know to.
Im not sure where the working together is but theres a lot of bought off silent people.
Clearly im not one of them.
Has any influencer made any vids on how to do the required license checks before a print sales? I notice what they dont teach. Espessially whats not being told to newbs.
Have you been warned theres no operating migrates anywhere in the world except France?
That should not be news to you.
Why? Because if your 3d print instructors where honest and honarable theyd not let you believe nor tell you to use a site or service that is faulse and would cause you to loose your value, ? Would they?
Sadly im seeing that happen with common popular influencers.
Ive asked some straight out are they againt us, and in writing a solid yes they are opposed to you me and all the comunity having resumed business services for all the 3d print comunity. I was truly shocked.
What supprises me is thats allowed on youtube. Im supprised the man im typing about actually is working to destroy us from within the comunity. And silence as i didnt see anyone else besides me lift a finger to even say anything.
Working together?
Im shocked infact to read your post only cause how the industry is awash with bad elements who smile and hide critical info that when you get it wrong cause youve not been told anything of real use your value can be completely wiped out.
Ive seen it alot.
Yet near all influencers in our industry still silent. They know.
They know me.
Will and Mr Data :):]
They know im the 3d print license king. They know ive been at this since before thingiverse exsisted.
They know im right.
Did you know all the things i just posted or was any of it news to you?
Im working to help the 3d print comunity so do you think the influencers who hide this info from you that does cause you to loose value if you got critical steps wrong are really working with you?
Keep in mind i have in writing from popular youtuber opposition to all the comunity being able to sell your own thing ownerships.
They want you to not be able to sell you own business.
Ask questions and your post shall start vanishing. You can see them but nobody else can.
Working together i wish.
1 website globally is operating for the entire 3d print comunity, who is winning thise who have worked to close us? 19 months ago thingiverse was operational since then not its just a fasard now in comparison.
Working together.
Lets see if you would say you are working together for us all or against us all?
If there are actually people working to save our comunity we must find them they are scarce.
I can near name them all.
@@WillofNewZealand Love that you edited this post :)
@@TheRealSamPrentice ok. Thanks.
Clearly i care not for Grammer.
But the business is not grammer. Nor me.
Theres room for industry improvement obviously.
Lots of it.
I keep seeing newbs loosing cause often influencers not telling them the key things to know.
Example i saw lots of people thinking a certain site had ownership migrates but it only had semi migrates and the influencers didnt guide people. So people were deleting there originals, the one with the actual true invention date.
So they infact deleted ownership of there businesses. Lots of them.
So many.
Omg.
The industry has some very shady stuff in it. And most are silenced by large companies. Gag emails i notice are popular. I have recieved many.
Ive got around them cause ive been at this so long i want to keep my credability so have so far remained independant from silenced.
I wish all nice success.
Be well.
So i take it nothing i said here is news to you.
Funny how being an expert aint what happyness is.
Maybe someone who is in a position to get business resumed reads this.
Having things in this industry vanish happens i know from experience.
I have serious concerns of the all eggs in one basket situation could easy result in a over night mega loss. Each thing can represent many jobs. 20 million things aprox on net.
1 site to buy or sell ownership.
Exclusive site so delete other global back ups.
See the problem?
@@WillofNewZealand Well you say that, but when creality's sharing site was caught for doing just this, pretty much everyone stood up for the cause, and it was well documented, did it make a difference? Nope, file sharing even back in the napster days was fundamentally wrong, but also right, and right because people wanted to gain control on how they listened to music. I think people do stand up for the cause, but at the same time is a non-monitored issue which has only a few very basic controls in place.
@@TheRealSamPrentice
Non monitised?
3d print licensed things are monitised. Mine are.
Some are free.
Pirate farms are such a big issue. Thief scum pirates are garbage.
Closing more of them down would be a great victory for the comunity.
Theres no justification to use a pirate farm nor use one.
Yet noticeing what influencers dont say is horrific.
Saying a site has migrate and to use it. When it didnt and all those who used it are loosing.
Yet the influencers go to great lengths to destroy the comunity by doing stuff like that. And then when its pointed out the hide the posts. They leave the vids up saying to newbs to keep useing.
We are being slaughtered.
Not so much me im a friggin expert at this.
Im going to make some vids about it.
I would not knowing send you to be robbed yet many of the popular influencers are doing that.
As ive said some say yes they want all the comunitys value crushed.
I have to go
Now those are some high quality prints you have there sir! I might print spare parts for quick repairs. Cannot wait to smash them next year 👍.
How on earth did you get the Protopasta CF PLA to print? Total fail on my MK3S, just keeps clogging the .4 hardened nozzle and there isn't a profile for the filament in Prusa Slicer.
This was so fun to watch at MRRF, Cant wait to build for next year!
Definitely
Thanks @TherealSamPrentice for bringing us these amazing racers 🤟🤟🤟
This is so fun. John @ Tripod Guitars is a great guy. Over @ Modbot we have all wanted to make these and have meetups.
Totally will try that print!
I have printed CF Nylon Footplates for my Electric Unicycle. I CAD them on Fusion 360 and printed on a Qidi X-Plus and a 0.6 Nozzle. Strong enough to ride on. You stand on EUC footplates, no saddle.
With all of your printers witch do you print nylon with
Those Death Racers are awesome!
Cannot wait to see more!
Heck yeah!
PLA + is much stronger than the Carbon fiber filaments. Many tests have been done and the PLA + comes out on top every time. If you want to build strong build with PLA +
Awesome to see and great use of drone, things at hand, and Gloop. Lots and lots of Gloop. I really want to print one, simply because I've never really done RC (no, the "rc" in my username doesn't have anything to do with remote control), but I also know I have 10k other things I want to do and should really finish something first.
Joel wearing a LTT hoodie is just so weird hahaha, I love it
John and Sam are great people. Hope to see everyone at ERRF
I only noticed THAT t-shirt at the end. Now I can't remember what the video was about! LOL
Number 1 influencer on youtube? Is that you?
The jump is by likely integritty, be you?
I would love to print one of these!
You should!
LTT Sponser?! wow!
usually hate ads but I like that hoody tbh
Using carbon fiber pla I once printed a hollow shell, 3mm thick, where it's connected on one end (like a can of soup without the lid) but it was small like 2 or 2.5 inch diameter. I stood on it with all my weight (170 lbs at the time) and it didn't break. If you do the slicer settings right you can make extremely strong parts with that stuff. I have yet to try cf nylon, but I'm working on a project that needs to be as strong as possible because it's supposed to be metal, and will probably try cf nylon for that, using those same settings I used for the part I mentioned.
The CF prints look like they turned out great Joel. Just curious which machine you used?
Those were on the Bambulab X1 Carbon
@@3DPrintingNerd I was not expecting that answer. I'm shocked (good way) as I've backed BL X1C Combo so I'm now even more excited to receive mine. I'm also going to print with PA-CF and GF-CF. Very happy with your answer Joel and excellent quality video's too. 😘
@@3DPrintingNerd I really hope the Bamboo turns out as good as intended. Hope to see some videos of production line machines and how they do when being heavily used :)
A thought... if knocking the head off is part of the win, having the head with magnetic electrical connection to stop the racer when knocked off.(obviously there should also be a bypass switch too)
That's pretty much how it works, there's a toggle switch in the neck, which switches it off when the head is knocked off.
I want to see carbon fiber nylon tested against industrial resins like henkels loctite resins or phrozens loctite resins.
I get that the point here is to have as much of the death racer printed as possible but a bolt put through a hole going all the way through the axle would be a wise upgrade. That narrow cross section where it broke will be a common failure point without metal reinforcement.
Given how warm electric motors can get...from my many years racing RC cars, boats, and planes...You probably should print the motor mounts in something other than PLA.. Something more heat resistant.
The HTPLA from Proto Pasta is what the CFPLA is, and it handles heat fairly well. Though if that does fail, I’ll just reprint in CF Nylon. :)
Had no melts on PLA frames so far to be far, and I tested this for 3 months ;)
Everyone had to have same Odell? Add grain cow catcher? Cover over tracks?
Where can I get that soap shirt? I seriously have no clue what you were saying at the end because I was laughing so hard. I tried to watch it again, but no luck. My inner child just won't stop giggling at it.
Try Polymaker Polymax PLA that stuff is awesome I use it in combat robotics battlebot style and holds up very well!
Links to your robots?
@@TheRealSamPrentice TH-cam blocks links I think but look on my home page under channels and you will see team junk yard dog. or search team junk yard dog combat robots.
thanks Joel!
OMG LTT is now a corporate monster able to sponsor other channels.
Nows its time to make a full size battle joel bot
The model was designed by Michael Badeley. Not sure why you don't mention the actual designer,
Sure was, that’s why the link is in the description.
Great comment, and here's the thing.. I'm working with MB on this design to get it out to a wider range of makers. If you look at the links and the trail you'll see it links to Mike site and he will continue to host the files. This isn't just one thing tho, i've been working with Mike on projects for years and he's a great friend of mine. The vision is the journey and getting the products out there is really key to success of model or design. The story here is I met Joel and we made a thing its super exciting for everyone and the product and make is just awesome... well unless you mis-print parts in which case its about 10 seconds of fun and several weeks of regret ;)
Very awesome
Hey you made it to my neck of the woods! I'm from Goshen and I had wondered if anybody from TH-cam would be here but I didn't pay any attention to it lol
Whoa! I guess you gotta show up next year. See you then :)
It's funny how there are more comments about the ltt sponsor than about the actual video itself🤣
Segway to our Sponsor...
As the master of print miles, does CF kill nozzles? I always hear vague bemoans, but can't filter based on cheap China vs E3D brass.
Yes. It always depends on the material itself and how much CF it has, but CF will always wear away brass nozzles.
2:44 I have questions about the drone flying over people. That's prohibited.
you just need to print pla at 240c for perfect layer adhesion
Woow!
Also the CF fibers in this application will not give you the extra rigidity you need. It is just Nylon prints way better (less warp, less give) if mixed with CF or GF fibers. That´s basically it.
Not only does CF Nylon cost waaaay more but it also really bad for you if you sand it, and I would not trust it while printing. I am sure it will emit dangerous fibers into the air while printing.
Love it that Linus sponsors other channels. I guess the merch shop is getting bigger than expected. Well done LTT!!!
So Sad that you keep pushing 3D gloop.. I want to order it, but it's all on backorder... :(
LTT is spreading!!!! Run for cover XD
Hahaha
You can chill the hoodie but you'll never be as good as me chilling the water bottle. I shill the LTT 40oz water bottle every time I take a drink on stream. Notice me LTT daddy notice me 😢
Just don't let CF nylon get wet or even be in a high humidity environment (aka don't use it outside full time). It will go soft on you.
Try printing a small hook. It'll be super strong. Soak it in water overnight. You'll be able to tear it with your hands.
You are saying you print it, wet it, and it's trashed? Just getting into this cfnylon
1:13 i spy a @colinfurze tshirt
I could print this stuff REAL strong. Learned a lot over the years running a 3d printing business...I got all kinds of tricks :) I also have some tricks to make outrunner motors way stronger too
Have you tried gf nylon and if so do you have any tips with gf nylon that you could share
Sounds like someone should check out combat robots - WAR in Seattle runs plastic antweight competitions if you want to stick to 3d printed components!
Why us carbon fiber filament if layer adhesion is your issue. Any filled material will by definition have (slightly) reduced layer adhesion.
Nylon without the CF isn’t stiff enough. I need the CF to add stiffness to the Nylon.
No promo code for hoodie? Because I really need it 🙃
I asked and they said not yet. But perhaps in the future.
Skip to 6:57 for CF Nylon
Joel you need to get in touch with Ivan Miranda. He knows 3D printed tanks
We are in touch, watch this space - more to come !
How rough is it on nozzles.
CF materials will erode away brass nozzles fairly fast. Well, depending on how much CF is in there and how much you run through.
I really did Like this ad. Please more ^^
SURE THING!
The last hoody I bought was in Seattle on the 4th of July because I was freezing my @$$ off.
Heh. We do have those days.
Just found this channel and for a moment I was confused if this was one of the twenty or so LTT other channels. In which case i would've dropped this channel in an instant because Linus tech tips is a bit jank, if ya know what I mean.
Off earth sighting?
SURE IS!!!
I remember a friend of you has birthday today? Me 2 🤪
LTT store lol
🔥💕👌👍
All due respect but screw LTT. He lost me with the whole “ad blockers are piracy” thing
I’ve read that PP has the best layer adhesion of all filaments. There are CF versions as well. Getting it to stick to the plate might be difficult though.
I once heard that thin sheets of balsa wood do the trick to stick the PP to the plate.
is cf nylon not weaker than regular nylon?
The CF will make the layer bonding slightly weaker, but it’s still better than PLA
Hahaha. I guess Linus is actually running out of cash and needs to sell is merch on other channels. 💀
Jesus, this whole video is just a series of ads. Of course 2 perimeters weren't enough for functional parts. You also know better than to use silk PLA for anything but baubles.
Infill does almost nothing to structural rigidity. Perimeters is what counts. Infill does not even really well meld with the rest of the model. You should optimize your model with ribs and such before you increase infill and therefore basically just weigth.
lol LTT . THAT