HELLDIVERS™ 2 on a Overclocked Steam Deck LCD (RAM/CPU/GPU/TDP)
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- Tested at 30fps, settings shown in the video. Extreme difficulty, 4 players, some stutters from recording but not much I can do there. You will get a much smoother helldivers experience on a OC Deck. Overclocks are as follows:
3200mhz Ram overlock = 6400mbps or OLED RAM Speeds, this is up to the RAM in your steam deck and not every deck can can do this.
Messing with your Ram overlock and timings can easily brick your steam deck if you don’t do your research and aren’t careful.
CPU OC = 4000mhz (Stock is 3500)
GPU OC = 2100 mhz (Stock is 1600)
RAM OC = 3200mhz/6400mbps (Stock is 5500 I believe)
TDP = 23 WATTS (Stock is 15 Watts)
CPU UV -20
GPU UV -20
SOC OV +30
OC= Overclock
UV = Undervolt
OV = Overvolt
The SOC requires overvolting for overclocked ram speeds to work.
I hope you can rerecord without the 30FPS limit so we can really see any clear performance gains instead of just the 0.1% and 1% lows
but thanks for the video!
Sure, I can do that today
Posting it now, I still really recommend the 30fps cap since the deck doesn’t have to work as hard and you won’t see those lower lows into the low 20fps range, however there were higher highs up into the high 30’s and 40’s as well. The video is posted now if you’d like to take a look.
How did you manage to get the processor frequency above 3500 MHz? I couldn't do it, even with the vangogh_oc_fix fix and setting the frequency to 4000 MHz in power tools. The processor frequency is simply not fixed, it very rarely rises to 3800 MHz and immediately drops to 3500 MHz. TPD 20 watts. GPU easily overclocks to 2000 MHz. If anything, the steam deck LCD and BIOS 131 ver.
Did you figure it out😮
Wow, imoressive! Where can i find a guide how to overclock SD?
I’d recommend the Steam Deck Discord, and these links: discord.gg/steamdeck || www.stanto.com/steam-deck/how-to-unlock-the-lcd-and-oled-steam-deck-bios-for-increased-tdp-and-other-features/ || www.stanto.com/games/unlocking-the-steam-deck-bios-for-under-voltage-and-over-clocking/ || th-cam.com/video/LNEI7BTc87Q/w-d-xo.html ||
You need to make sure you are on BIOS 131 as well to follow the other guides I sent by Stanto, Cryo’s video is just so you can get a general understanding of OC and UV and know where to look when you do it (the names in smokeless shown in Cyros video are the same in the new BIOS 131 method without smokeless). Here’s a method to flashing ur BIOS www.reddit.com/r/SteamDeck/comments/16d8qv2/how_to_manually_update_your_bios_on_steam_os/
Hi. Thanks for the video. Could you test cyberpunk 2077 with overclocking . Thanks
I might give it a try soon!