Hi THank you for video I have no VVDI2 but the best tool and faster tool for this is Original Car Prog On Line The whole proces cloning dashes lasts 20 minutes and you do not need to program key as well
@@heshamessam8042 I have a VW Jetta 5 with immobilizer 3 and I want to swap the red screen instrument cluster to a black and white screen cluster from a Scirocco. I need help with that, which program can I use?
In vvdi2 is service mode option is shows you need read eprom first and whrite back in dash. First need to whrite original eprom by obd back to dash. After this you can read the immo data and as last step whrite old(orig immo data) back to it. This it. When make this on car, first safe abs coding (very important)
@@heshamessam8042 في عربيات بتيجي مغيرين السستم بتاعها وماخدة غير رقم شاصي حضرتك عارف انه الكلستر الفرجن الي بنجيبوا من الوكالة بيكون فرجن عند البرمجة اون لاين بينكتب الفن والايموا داتا وعل حاجة بالاودس ..ف لو في طريقه نصفر فيها البيانات ونخلي فرجن
Salaam brother, I have change cluster watching your video I have done car is start. But ABS light and skiding light on now. When I check with dignostic tool is show wrong adaption. Can you help me please.
Hi, im doing the same cluster swap and im having a keyless go key. Steps that i do 1. Read old cluster eeprom using vvdi prog and prepare service mode using vvdi2 then enter and read immo data. Copied immo data in text file. Write back non-service mode dump and reset cluster steps are taken. 2. Read new (used) cluster eeprom and prepare service mode. Read immodata and modified vin, cs, mac, key, pin, status, config. i couldn't modify power class. Write back non-service mode dump and reset cluster steps are taken. 3. Am i missing some steps here? I couldn't get the car switch on ignition and started. Immobilizer active is written on dash. Can you please help me on this?
Read immo data from old (don't know why servicemode as u have a working key ).. write to new (will need service mode to access immo ) ... also read vvdi2 manual as someone one told me in comments
@@heshamessam8042 Why both?! Isnt the Mileage on the one of them only? If the doner cluster is exactly same model do we still need hardware ? I thought just swapping the chip it works
@@solarsolari6705 swapping chip as i know will not work ... hardware is same if part is same not neccessarily the model ... anyway reading and writing the data is the best way at least on my opinion and that what i do
Hi
THank you for video
I have no VVDI2 but the best tool and faster tool for this is Original Car Prog On Line
The whole proces cloning dashes lasts 20 minutes and you do not need to program key as well
You are welcome
Hey, can you please help me with this?
What's your exact problem? What's app +201005387513
@@heshamessam8042 I have a VW Jetta 5 with immobilizer 3 and I want to swap the red screen instrument cluster to a black and white screen cluster from a Scirocco. I need help with that, which program can I use?
In vvdi2 is service mode option is shows you need read eprom first and whrite back in dash.
First need to whrite original eprom by obd back to dash. After this you can read the immo data and as last step whrite old(orig immo data) back to it. This it. When make this on car, first safe abs coding (very important)
سلام عليكم استاذ بارك الله فيك احسنت النشر،.لو سمحت عندي سوال كيف يمكن ان نجعل العدادات فرجن بدون ايمو داتا او فن نمبر
@@mustafaalsaadi6757 و عليكم السلام ورحمه الله ... شكرا ... محتجتش اعمل كدا ... او ايه الهدف من كدا
@@heshamessam8042 في عربيات بتيجي مغيرين السستم بتاعها وماخدة غير رقم شاصي حضرتك عارف انه الكلستر الفرجن الي بنجيبوا من الوكالة بيكون فرجن عند البرمجة اون لاين بينكتب الفن والايموا داتا وعل حاجة بالاودس ..ف لو في طريقه نصفر فيها البيانات ونخلي فرجن
ف الحاله دي ممكن تعمل سينكرونيز من كنترول المكنه للعداد ... او تاخد عداد السيستم
Salaam brother,
I have change cluster watching your video I have done car is start.
But ABS light and skiding light on now. When I check with dignostic tool is show wrong adaption.
Can you help me please.
Ok so if you have the key just need to copy and paste the datas no open the cluster to do all that extra steps?
Won't access data till open
الله ينور ياهندسه
قلب الدنيا ع رقم حاضرتك ومش عارف اوصل لحضرتك 😂
🙂دا نورك ... 01005387513
Good job
Thanks
At last how it was done? Could you pls explain the end process.
To much tries ... at different identification ... it was identified wrongly at first
برك الله فيك ❤❤❤
الله يبارك فيك
i think its easier to do the whole work with VVDI PROG .. right ? read the files and write in new module with VVDI PROG
Vvdi prog will not read immo data
Salam what r the cables u use on the cluter to get light. Thank u
Original cluster connector
Hi, im doing the same cluster swap and im having a keyless go key. Steps that i do
1. Read old cluster eeprom using vvdi prog and prepare service mode using vvdi2 then enter and read immo data. Copied immo data in text file. Write back non-service mode dump and reset cluster steps are taken.
2. Read new (used) cluster eeprom and prepare service mode. Read immodata and modified vin, cs, mac, key, pin, status, config. i couldn't modify power class. Write back non-service mode dump and reset cluster steps are taken.
3. Am i missing some steps here? I couldn't get the car switch on ignition and started. Immobilizer active is written on dash. Can you please help me on this?
Read immo data from old (don't know why servicemode as u have a working key ).. write to new (will need service mode to access immo ) ... also read vvdi2 manual as someone one told me in comments
what about just exchanging the chips on the board?
Which chip ? Eeprom ? Immo data is on eeprom and processor as i think
@@heshamessam8042
I don't know exactly, but I think it's on the processor.
@@solarsolari6705 and also eeprom... so what will you exchange? ... both ? Will need sane hardware and very hard to do
@@heshamessam8042
Why both?! Isnt the Mileage on the one of them only?
If the doner cluster is exactly same model do we still need hardware ?
I thought just swapping the chip it works
@@solarsolari6705 swapping chip as i know will not work ... hardware is same if part is same not neccessarily the model ... anyway reading and writing the data is the best way at least on my opinion and that what i do
Where can I get cluster photos?
Pogo photos ... i downloaded it and don't remember
Super
Thanks
You was on the wrong pogo point I had the same problem the diagram you used is wrong thats why you did'nt get the brake light only
thanks ... could you share the right one
Try with fvdi
At the end .. all done successfully qith vvdi2
Next time read the manual more as once!!!! It whrite for you, fist whrite ori eprom by obd back to dash
Excellent thank you so much i will read that
السلام عليكم اخي الكريم ارجو منك مساعدة اذا امكن عندي vvdi2 احاول قرائة cluster pq لكنه يعطيني هاته الرسالة
non standard upload data failed
في mqb يعمل جيدا لكنه في pq لا يقرأ immo dat شكرا على المساعدة اخي
@@najibdiagvw I can't understand, English would be nice
اي هو ال pq؟ مش فاهم