Hello sir. I just suscribe to your channel. Thank you for sharing this video. I am on a retrofiting kessy in my VW Jetta mk6. I just learned from you that I need to have the pin and cs to adapt it. Is there a way to adapt a used elv from eBay ? Because they are not providing the pin neither the cs info. I found in another part in the web that can be accomplished using odis online right? Also how can I adapt the Kessy module? I have also a channel related to vw retrofitting things. Thanks a lot really
Good afternoon. You have a B+L switch on your stand, what does it mean? Does the Ignition switch allow you to turn on the ignition if there is no ELV connected to the stand?
You can see a high-frequency antenna on the right under the dashboard. Is this the only antenna connected to the stand or were the others not included in the frame?
Hello sir. Its me again. You said in a previous message thst if i hace a used elv i need to use odis. But if i use odis vw will detect thst my chassis does not support kessys then they will no adapt it. Could it be?
Hello. In this case you must buy full kit, or try connect your kit to another car which was already from factory with keyless function and adapt by odis, all with try..
Just try to teach NEW virgin ELV with VVDI2 , but no luck!! Can't login, try to write manual all 0000 then try to write all 11111 , than try to write original CS and PIN but nothing. Seems to me that the new virgin is somehow locked or completely blank. Still need help!!
THANKS GREAT VIDEO FRIEND I SEE YOU BENCH KESSY CLUSTER ELV AND KEY CORRECT IF KESSY IS BAD IT WONT TURN ON NOTHING AT ALL RIGHT IT SEEMS THAT PUSH BUTTOM SIGNAL ON GOES FIRST TO ELV THEN TO KESSY AND FINALLY CLUSTER IAM I WRONG
Hello, i don’t understand what do you mean exactly, but about exchanging cluster just read immo data from original and write in new donor cluster by obd, this can done if in both cluster have working keys.
@@haroutiounhalladjian First of all thank you very much for responding, I have the eeprom dump of the old original ezs read by obd, but when I want to write in the new ezs, the vvdi tells me that the pin or cs is not valid, thanks (if it were necessary to pay for your help i have no problem) thanks again
Beautifully done…thank you for sharing
Hello sir. I just suscribe to your channel. Thank you for sharing this video. I am on a retrofiting kessy in my VW Jetta mk6. I just learned from you that I need to have the pin and cs to adapt it. Is there a way to adapt a used elv from eBay ? Because they are not providing the pin neither the cs info. I found in another part in the web that can be accomplished using odis online right? Also how can I adapt the Kessy module? I have also a channel related to vw retrofitting things. Thanks a lot really
Marto El Hello,if not available pin + CS,so you must have odis online to done.
@@haroutiounhalladjian thank you very much for your answer. I have a clone cable vas5054a with Odis so I am good? And what about Kessy?
Marto El Hallo, best way use odis also to change the kessy.
@@haroutiounhalladjian do you have a video on how to do it?
Can i do 2 questions? Do you have ecu on your boxy? Why did you decide to let 00 on the byte 7th? isn’t mk6 has support to this?
Good afternoon. You have a B+L switch on your stand, what does it mean? Does the Ignition switch allow you to turn on the ignition if there is no ELV connected to the stand?
Good afternoon, no, this switch to turn dash lights on, not for ignition on.
You have a B+L switch on your stand, what does it mean?
You can see a high-frequency antenna on the right under the dashboard. Is this the only antenna connected to the stand or were the others not included in the frame?
@@СергейРадченко-з2е yes all the other antennas there
Hello sir. Its me again. You said in a previous message thst if i hace a used elv i need to use odis. But if i use odis vw will detect thst my chassis does not support kessys then they will no adapt it. Could it be?
Hello.
In this case you must buy full kit, or try connect your kit to another car which was already from factory with keyless function and adapt by odis, all with try..
can you do a tutorial on how to open ecu to work with any car
Fs0c1ety_BS Hello. On the websites there a lot ideas how to open ecu, so its easy to get your request.
Hey man, awesome video - if i may, how did you make this box ? it's awesome, could you guide me how ?
Hello, thanks for your kind words, Dear its difficult to let you know cause its hard, sorry...
i so love these boxes did you make yourself
Daza Essox Hello, yes Dear make by my self
been meaning to learn this, thanks. vvdi 2 is just full of features. this should work on porsche cayenne correct?
Jonathan Pena Hello.
No friend this option just work on mk6 elv adapt, not for porsche
Hello , how to adopt new virgin ELV , what is pin and CS for new one ? Now brand new ELV not so expencive .
Hello. I neve try brand new ELV adapt, try if elv let you write manual immo info after you can adapt.
Just try to teach NEW virgin ELV with VVDI2 , but no luck!! Can't login, try to write manual all 0000 then try to write all 11111 , than try to write original CS and PIN but nothing. Seems to me that the new virgin is somehow locked or completely blank. Still need help!!
Thank you friend can programme elv in car
Please help me, sou have door button…how should I connect it?
Hello, you need elsawin there you can see all your request Diagrams.
Is it possible to adapt a used elv if I can't extract pin/CS of the donor elv ?
Hello, its not posible to read mcu of this ELV, if you can read mcu so posible manual, for me to done just use odis online.
Hello
How can you find out the CS and PIN of the new ELV used
Hello, i get elv with engine ecu from the same car, and i read from engine ecu the CS + pin to can adapt the elv.
does this also work for used elv passat 3c ?
Bav Graphics Hello, on used elv for passat not accept to readapt ....
Bonjour, comme chercher pin cod?
👍
THANKS GREAT VIDEO FRIEND I SEE YOU BENCH KESSY CLUSTER ELV AND KEY CORRECT IF KESSY IS BAD IT WONT TURN ON NOTHING AT ALL RIGHT IT SEEMS THAT PUSH BUTTOM SIGNAL ON GOES FIRST TO ELV THEN TO KESSY AND FINALLY CLUSTER IAM I WRONG
Hello
Please when exchange instrument cluster must adaptation before programming.
Hello, i don’t understand what do you mean exactly, but about exchanging cluster just read immo data from original and write in new donor cluster by obd, this can done if in both cluster have working keys.
@@haroutiounhalladjian thanks for reply yes I do like this but I see the key not found please must I make a new keys
@@fatahjamal3797 so now can you read immo by obd? Or it sow u need working key? and what diag tool u are using?
@@haroutiounhalladjian I use fvdi and I have 2 working keys of the dash I Making it in the table not in the car
Hi
Please after transfer immo data must detel keys from cluster dooner
Hi how can I find one this thnx
hello i have a problem with a elv audi a6 2006, i try adapt with vvdi2 but i cant please can you help me?
Hector Nuño Hello, first you must to have the eeprom dump from old original ezs, to load in vvdi2 to let you to adapt new used ezs.
@@haroutiounhalladjian
First of all thank you very much for responding, I have the eeprom dump of the old original ezs read by obd, but when I want to write in the new ezs, the vvdi tells me that the pin or cs is not valid, thanks (if it were necessary to pay for your help i have no problem) thanks again
the ezs its new no used
Hector Nuño Hello, please contact me by email, data_speed2006@hotmail.com
Why bother upload video if you won't show us how to connect the instrument to vvdi2 and ELV !!