Exactly the video I needed. My graph has just been blank for days. I searched and searched but couldn’t figure out what I was doing wrong. Nice work man, thank you for the information!
The GOAT BEEN 4 days couldn’t read it, and now I can read both one is connected to the red cable and the other one to the blue one, only thing is I can’t put it on lambda but I can deal with that lol
@@BurninGas8.1 help, couldn’t figure it out on how to read them, only thing is I can’t change the units to lambda but it’s ok, I can finally log them thanks to you
What math parameters did you put in for the eq error ratio? Ive got my wideband ran threw pro link and eq ratio on mine and it's not pulling any data in my afr graph.
@@BurninGas8.1 yes it seems you talk over it beefily but setting up the afr error math is my issue.getting it to go from volts to afr. ive transformed the mpvi-wideband channel to show afr instead of volts but when i crate a graph nothing shows but because its trying to read volts lambda.
White on gauge to red on prolink and black on prolink you will tie into the ground from your guage to the cleanest ground possible your missing the signal output ground so the next best thing is a shared ground with the gauge
So this is the graph that you will attempt to fill in using various loads and speeds …. Once the graph is filled in you would then compare it to the VE table and try to lower it cell by cell … I am guessing you would want the numbers to read 0 all the way across
Exactly the video I needed. My graph has just been blank for days. I searched and searched but couldn’t figure out what I was doing wrong. Nice work man, thank you for the information!
I like helping people thanks bro hit subscribe
Most helpful video I’ve come across on this topic. Thank you for sharing your knowledge with us! 🙏
Thanks buddy
Sick I love seeing the progression of this truck
The GOAT BEEN 4 days couldn’t read it, and now I can read both one is connected to the red cable and the other one to the blue one, only thing is I can’t put it on lambda but I can deal with that lol
What’s the goat
@@BurninGas8.1 Greates of all time, is like a form to say that he is the best
@@Spxrc so did I do somethin wrong or did this help
@@BurninGas8.1 help, couldn’t figure it out on how to read them, only thing is I can’t change the units to lambda but it’s ok, I can finally log them thanks to you
@@Spxrc I know a few tricks when it comes to tuning as well
There a better way to populate that data so you can copy it over in to the maf to adjust the fueling also make sure close loop is off
Do i need to get other program or update besides prolink adapter? Thanks
just do your updates through hp tuners
Updates on the scanner or editor ?@@BurninGas8.1
What math parameters did you put in for the eq error ratio? Ive got my wideband ran threw pro link and eq ratio on mine and it's not pulling any data in my afr graph.
did u watch the video thoroughly it should be all explained...
@@BurninGas8.1 yes it seems you talk over it beefily but setting up the afr error math is my issue.getting it to go from volts to afr. ive transformed the mpvi-wideband channel to show afr instead of volts but when i crate a graph nothing shows but because its trying to read volts lambda.
Using aem 30 4110 gauge and there only, black, red, blue, and white. The pro link + have blue, black, red, yellow, and orange. How would wire this?
I can’t honestly tell ya I’ve never used that guage
Should only be one wire that you hook to pro link if I remember right
White on gauge to red on prolink and black on prolink you will tie into the ground from your guage to the cleanest ground possible your missing the signal output ground so the next best thing is a shared ground with the gauge
So this is the graph that you will attempt to fill in using various loads and speeds ….
Once the graph is filled in you would then compare it to the VE table and try to lower it cell by cell …
I am guessing you would want the numbers to read 0 all the way across
do i have to be connected to truck to find air fuel ratio comanded i tryed without but dont see it its a 2003 gmc 6.0
need to be connected probably running and make sure its on your channel list
@@BurninGas8.1 could i email u a log to see if i have everything set up right ? im new to tuning with a wideband