BRO, I LITERALY SPENT AN HOUR YESTERDAY LOOKING FOR A VIDEO ON HOW TO ASSEMBLE MY FINGERBOARD, (i got it yesterday) AND YOU MADE THE VIDEO TODAY!!!!!!!!!!!!!!!!!!!!!!
Video idea: Compare different fingerboard parts or make polls about it on discord and make a video about it. Example: brt vs dynamic vs ytruck vs vortex vs obsius vs eureka vs uag vs caramel vs china trucks Berlinwood vs unique vs beastpansta vs catfisbbq vs dum1 vs cowply and more Make for wheel also
@@no1likeyousorry for late response you probably gotten a fb complete already but i bought a dynamic fingerboard 32mm width comes already assembled dynamic trucks dynamic 64d wheels there inbetween soft and hard urethane wheels had this board for 8 months love it. $100 bucks but worth it. Also a flatface g15 complete is a great option my buddy had one and i tried it loved it mike schneider knows how to make a fb. Those ran $70-75 bucks
@Legalizeranch420 Thanks for the reply. I went with a TeakTuning complete to get me started in the hobby. It's not bad, even if it is just a step up from a TechDeck. I imagine I'll want to upgrade at somepoint, or even start a collection. Cheers for the info!
Alex ive been wodering on i should buy new trucks and grip ans some new wheels for about 18$ or just buy a Bull god board for 30$ Cause it has A good deck and trucks and grip what do u think?
When i orderd from bullgod fingerboards it seemed good, but the kit box didn't even fit a fingerboard.Then the nuts didn't fit the trucks and mostly was hard to assemble. Can't use that fingerboard because of that and now i just got stickers for 40 euros.
graphic side up: the bigger ones go on the bottom, small one on the top after the other truck-piece was hung in, then you screw it together. Can be very fiddly, some pincers do help to push the stack down before attempting to screw it Washers are a good idea since there are reletively huge forces on those trucks, which tend to force small pieces in-/outwards, resulting in the whole assembly becoming pointless or even break. I prefer my trucks tight, so I usually DIY my bushings as the ones delivered are usually not what I need or want. Get creative with what materials you use...I´ve done dozens so far, from wood to steelrings to hard plastic in sheets stacked on top of each other...PVC is very endurable, so I suggest using that...
@@Hunne2303 thanks! Not sure what you mean by the bigger ones and smaller ones the ones I got were all the same size. Also they're conical, what orientation do they go on? I'm assuming they have the narrow side on the outside and the wider sides sandwich together? Also why do you prefer your trucks tight? I am curious
then you disassemble the truck by removing the screw and pulling the assembly apart...you WILL need to do this after some time regardless as they will wear out
You can take your trucks off even if you grip over the screws. Just put your screw driver in the screws through the tape. Still takes them off just the same without having to rip the entire sheet of tape off. That's what I do anyway.
I prefer good old duct tape as my grip. Foam doesn´t work for me. Currently I have military green "grip" with a silver "graphic", makes for excellent contrast since I usually FB on my kitchen counter, which is black marble...you can actually count the rotations easily that way. The topmost truckbushings also usually suck AF...either too hard (a.k.a. becoming brittle fast) or way too soft (a.k.a. stuff hanging out of the truck). I use a small, round-ish cut-out of a 1mm thick PVC hose, works nicely and so far shows no signs of wear.
Alex I love your channel and I have had a the same tech deck for the longest time.i am a child and cannot buy a finger board so I would appreciate if you could get me a finger board setup if not then I have faith that your channel will grow
I rather not take trucks off cuz it has messed up the trucks once and ive looked online and it has happend to other peopel aswell, so i just put the grip over it
not exactly true about not being able to take the trucks off when grip tape is covering it, if you look at the finger board from the sides to find where the screw is you can actually twist a hole into the grip and unscrew the trucks off, it wont look the cleanest but it is still an option, i've done it once with a teak tuning custom complete
You always showcase BullGod Fingerboards in the greatest way! Thank you Alex for showing people what they can expect from us🔥 Awesome tutorial!
I really want to get one but my mum says they’re too expensive 😭😭😭
Can I get sponsored lmao
@@Double_Auto liar
i luv yu
@@pantherboyy7779 he's not liying
3:19 damn those are actually some cool ass scissors lol
Thank you for this great tutorial
Day 1 of asking to make a fingerboard out of glass
The start of a adventure
Genius
That's a really good idea!
I want to see it shatter like the braille glass skateboard
The first day yet the last
My favorite TH-camr with an amazing video once again
Nice vid keep up the great work this video is really helpful
congrats for 100k subs keep up ur hard work
When I watch you like on stuff you make everything way easier I finally built my first professional fingerboard 🙏
I like watching how-to videos even if the task seems straightforward. Someone else might do it differently or know how to do it better. Great video!
Love the vids
I’ve seen tons of vidoes on how to assemble a fingerboard never the less good video as always gee😮💨😮💨
Bro this is Goated
Oh my god what the hell i did something way different and I’ve been fingerboarding for quite a good time now
Bro
Bro Alex you should try out black river tucks and see if there better than dynamics
Can you do a review on the hotwheels finger board
There is a new tech deck tool that looks like an actual skate tool and has a really lot of leverage.
BRO, I LITERALY SPENT AN HOUR YESTERDAY LOOKING FOR A VIDEO ON HOW TO ASSEMBLE MY FINGERBOARD, (i got it yesterday) AND YOU MADE THE VIDEO TODAY!!!!!!!!!!!!!!!!!!!!!!
It's your lucky day then.
thank you this video was very helpful
I went back and liked all your vids i am subscribed to you and have bell notifications turned on
Your vids are cool
This helped so much
thank you very much i appreciate this video
Very dope bro 👌🏾I’m feeling that pro board
When is the prize🎉
This video was so useful for me
Bro ur the best
Shark wheels are 🔥
Video idea:
Compare different fingerboard parts or make polls about it on discord and make a video about it.
Example: brt vs dynamic vs ytruck vs vortex vs obsius vs eureka vs uag vs caramel vs china trucks
Berlinwood vs unique vs beastpansta vs catfisbbq vs dum1 vs cowply and more
Make for wheel also
Thanks gripsion,now I learnt how to set up a fingerboard 6:03
Where can we buy those screw drivers? alexx??
what do you think of lc fungerboards. are they good fingerboards
Hey gripsion i have a question is lock nuts used for the bearing in a finger board
dude your getting scamed do not fall for this comment bot lwots of youtubers are saying not to im just waring you
Day 7 of asking to make a fingerboard our of glass
Thanks for the help I just assembled mine
Lil tip put a bowl from thing to falling down
Thankfully Lc boards give you instructions
Where can I good quality board that comes already assembled and gripped?
Whats your price range?
@@Legalizeranch420 $75-100
@@no1likeyousorry for late response you probably gotten a fb complete already but i bought a dynamic fingerboard 32mm width comes already assembled dynamic trucks dynamic 64d wheels there inbetween soft and hard urethane wheels had this board for 8 months love it. $100 bucks but worth it. Also a flatface g15 complete is a great option my buddy had one and i tried it loved it mike schneider knows how to make a fb. Those ran $70-75 bucks
@Legalizeranch420 Thanks for the reply.
I went with a TeakTuning complete to get me started in the hobby. It's not bad, even if it is just a step up from a TechDeck. I imagine I'll want to upgrade at somepoint, or even start a collection. Cheers for the info!
@@no1likeyou i had a teak tunning deck complete 2 yrs ago mine was brown board with pink trucks you can slowly upgrade them as well with parts
Alex ive been wodering on i should buy new trucks and grip ans some new wheels for about 18$ or just buy a Bull god board for 30$ Cause it has A good deck and trucks and grip what do u think?
What are those wheels, they look super cool
How do u change the currency
P-rep has instructions
Day 5 of asking to make a fingerboard out of glass
Can u review the Slushcult fingerboards the 25$
You didn’t show putting stickers on bottom Were can we order stickers?
what is the big screw you use called im assemble fnger board
I love your Videos pleas can you do a video on how to do a kick flip I’m a beginner from baker shaarani
Thank you so much
Finger boarding as I watch this lol
The bullgod fingerboard is really good but the shipping took almost 3 weeks.
You got that wright i mine took 20 days
First like and comment love you SOOOOOO MUCH
what screwdriver do you use.
Where do u get your tools
I’m making a teak tuning board set up right now
Can you get the Prep Janeiro starter I'm thinking about getting it but I don't know if its a good bird for my first real finger bord.
When i orderd from bullgod fingerboards it seemed good, but the kit box didn't even fit a fingerboard.Then the nuts didn't fit the trucks and mostly was hard to assemble. Can't use that fingerboard because of that and now i just got stickers for 40 euros.
can you please describe how to put on bushings? do I need to use washers too?
graphic side up: the bigger ones go on the bottom, small one on the top after the other truck-piece was hung in, then you screw it together. Can be very fiddly, some pincers do help to push the stack down before attempting to screw it
Washers are a good idea since there are reletively huge forces on those trucks, which tend to force small pieces in-/outwards, resulting in the whole assembly becoming pointless or even break.
I prefer my trucks tight, so I usually DIY my bushings as the ones delivered are usually not what I need or want.
Get creative with what materials you use...I´ve done dozens so far, from wood to steelrings to hard plastic in sheets stacked on top of each other...PVC is very endurable, so I suggest using that...
@@Hunne2303 thanks! Not sure what you mean by the bigger ones and smaller ones the ones I got were all the same size. Also they're conical, what orientation do they go on? I'm assuming they have the narrow side on the outside and the wider sides sandwich together?
Also why do you prefer your trucks tight? I am curious
love the vids hi from britan
what if you need to put new bushings in the trucks?
then you disassemble the truck by removing the screw and pulling the assembly apart...you WILL need to do this after some time regardless as they will wear out
Day 3 of asking to make a fingerboard out of glass
day 134 of asking to build a fingerboard out of rubber
Every time I do grip first the grip eats the screws
Day 2 of asking to make a fingerboard out of glass
Ik im late but in finland we have company that sells very decent wooden fbs like for 20€ and thet made video that trlls evrthing
My bolts are weird and uneven… i’m using a blackriver board and trucks. Am i just be or is there something wrong with one of the parts?
Finally Finally Finnalllyyy
You can take your trucks off even if you grip over the screws. Just put your screw driver in the screws through the tape. Still takes them off just the same without having to rip the entire sheet of tape off. That's what I do anyway.
you can also use a tech deck instead of a nail filer
Can you please replenish the stock of fingerboards on your website.
Nice video
How do I collect my prize
This video makes it look easy, just ripped in half to decks while trying to screw the trucks
What tool is that
how do you upgrade a fingerboard using only homemade items?
I prefer good old duct tape as my grip. Foam doesn´t work for me. Currently I have military green "grip" with a silver "graphic", makes for excellent contrast since I usually FB on my kitchen counter, which is black marble...you can actually count the rotations easily that way.
The topmost truckbushings also usually suck AF...either too hard (a.k.a. becoming brittle fast) or way too soft (a.k.a. stuff hanging out of the truck). I use a small, round-ish cut-out of a 1mm thick PVC hose, works nicely and so far shows no signs of wear.
Alex I love your channel and I have had a the same tech deck for the longest time.i am a child and cannot buy a finger board so I would appreciate if you could get me a finger board setup if not then I have faith that your channel will grow
One of the hardest things to do with the damn screws so small
bro my wheels are spinning for one second
What mold do you use?
Bro how tf did holes just appear on your grip. Crucial step
Hey I was gonna buy a P-Rep board off of Amazon for 20 dollars would that still be a good board?
I have a P-Rep Doughnuts board, the board is cool I guess but the trucks are great with the bushings, wheels are decent enough too.
I say go for it.
@@VortexKiller2 Thanks man! I really needed to know that helped a lot!
@@TheLaughGiraffe879 you're welcome, you'll absolutely enjoy the trucks
Just go DK at that point. DK is only 25 - 35 and 10x better than a P-Rep board.
@@Hauns91 ok thanks man for the feedback I’ll look into it
I’m in nz and I’m getting a finger board
I rather not take trucks off cuz it has messed up the trucks once and ive looked online and it has happend to other peopel aswell, so i just put the grip over it
restock the mountain decks >:(
Are you somehow related to Aceu?
Anyone know why my trucks keep falling off?
Try to use Lock-Nuts, they have a little rubber inside the thread wich prevents it from unscrewing trough the vibrations of driving it
You can still just screw into the grip tape and get the screws out
Day 1 of saying hi till Alex says hi back
Hi❤
not exactly true about not being able to take the trucks off when grip tape is covering it, if you look at the finger board from the sides to find where the screw is you can actually twist a hole into the grip and unscrew the trucks off, it wont look the cleanest but it is still an option, i've done it once with a teak tuning custom complete
Pls make a paper finger boat
3:19
whos here and has tons of tech decks and know how to put them together but ur just tryna support them
👇 :you
Bull god giveaway plz
Oh.
Day 1 of asking for let me it for you deck
To cut grip tape I use a tech deck
this only correct way
Day one of asking to do a google search vid
I’m so hype to get my first pro finger bored even tho I’m getting it in 3 weeks rip my tech deck what I drowned trying to do a kick flip over my sink
Bang minta fingerboard nya 1 Yang Ga dipake
Hi!
Congrats you are the first to comment
@@chickworkfb6933 thx lol
😂😮❤🎉🎉🎉🎉😢
Here