@@TheRealGoopyGoop Unfortunately I haven’t. Life has gotten in the way a bit and has been a bit crazy. But I plan to pick it back up. Would love to get back with it soon.
why trucks on first? some people like the screw showing because it looks more like a skateboard, i personally dislike how they look without screws showing aswell
Excellent video i needed to see this! I have a couple teak tuning completes coming soon! Ive been playing with tech decks since the early 2000s and used to skateboard well before that too, so i know how to set one up for the most part, but as far as the grip tape on a finger board goes i wasn’t sure how to do it. Thanks for the help!
I agree ☝️Teak calls their boards and trucks pro. I think there decent quality! But since I got a better setup with a handmade board and dynamic trucks. I would not consider teak to be a pro board I think considering the shape is very standard.
Did the decal peal off? Get ahold of teak if it wore down fro doing grinds it’s supposed to it’s a “real wear” graphic I believe and is made to look more realistic. If you got spacer trucks put them on the axel first then the wheel and then put the nuts on the truck 👍
Super clean setup. I got their progidy trucks and Apex ATP wheels on my tech deck performance deck. I'm thinking up upgrading to one of their 34mm boards but I was wondering does it have any concave along the board? And does it have a tail? (Longer/shorter end) couldn't fully tell with that super clean grip job done so fast 😅👌🏽
It’s med concave from what I can tell a twin shape deck… if one side is short i cannot tell. If you are looking for a directional shape Plike fingerboards on Etsy is my favorite mild to med concave And traditional long nose short tail (my current main setup)
This is a great starter to intermediate setup! Techdeck performance series are nice too but hard to come by in stores. (Typically resold for $20-35) performance series don’t have bearings in the wheels or locknuts.
The color of the trucks didn’t fit that well to this setup… Silver or white would be nearly perfect and would balanced out all of the colors… With more color would just fit baby blue (not sure if any trucks out there with that) and maybe even gold but on gold I think I should go with baby blue wheels to get a nice contrast… But this, holy smokes, no Idee how you get to the idea that this would looking nice in any way…🙈
the most god tier grip job ive seen
Thanks yo!
I was just about to say that. Top Notch work. 👊
This is how i grip my real skateboard, i have 1 of these teak completes coming in the mail today so excited
100% wrong go check out rodfilmes
Yeeeah for real
The grip job is so perfect HOW
Pls uploade more videos like this I just found ur channel from ur tiktok and gotta say already lovin u keep up the grind ur gonna blow up one day!
This is the most cleanest fingerboard setup. Nice dude 👍❤
Bro is really skating with crocs that’s honestly so cool I can’t even fingerboard with shoes on. I have to do it without the little shoes.😊😊
Excited for future content now that youve started putting out longer videos! :D
Not for nothing but you did a clean job on that grip tape! My teak deck is my first pro board. So far so good. I bought a yeti complete.
Thanks! Nice how do you like the yeti ?
@@stickyartfb I like it so far. Has some nice pop to it. I’m still learning the ollie lol but it’s fun.
🔥
@@MichaelBrianInc how's the ollie's coming along 7 months later , i hope you stuck with it
@@TheRealGoopyGoop Unfortunately I haven’t. Life has gotten in the way a bit and has been a bit crazy. But I plan to pick it back up. Would love to get back with it soon.
I like that graphic and nice color coordination with the trucks n bushings
Thanks I have got a new setup since this one but it is still really nice! performs almost as well as my setup with dynamic trucks.
You are the bast fingerboard channel on TH-cam. You got me into fingerboarding in the first place. I love your vids 😊
Thanks 🙏 that’s awesome!
Dang, that board is SOOOO clean... fire ma bro 🔥
This is the best fingerboard setup video on TH-cam right now...
Btw
I have ring type bushing and thoes gets swollen up.
Is that normal?
Thanks ✌️The o ring style tend to stretch over time. If you overtighten or like tighter trucks they tend to bulge a bit.
That’s super cool!!!
But suggestion is that u should put the trucks on first!!
why trucks on first? some people like the screw showing because it looks more like a skateboard, i personally dislike how they look without screws showing aswell
Excellent video i needed to see this! I have a couple teak tuning completes coming soon! Ive been playing with tech decks since the early 2000s and used to skateboard well before that too, so i know how to set one up for the most part, but as far as the grip tape on a finger board goes i wasn’t sure how to do it. Thanks for the help!
Thanks for helping me on the screws part i couldent get it cause they are so small
Great vid, Earned a sub!
Nice
I just bought thoes same trucks they just came in today
i want to but the same on now its so clean
I just got some of there fingerboard stuff for my birthday but they forgot my boardrails they had the screws in the bag but not the rails
Reach out to teaktuning customer service or dm them on IG
What is, in your opinion, the highest quality premium fingerboard brand?
Goo ltd. And chems are very high quality and I love the graphics!
@@stickyartfb thanks! how about for the trucks?
the wheels are urrethane?
Wait, the washers are only for the o rings?
Thanks for the update and keep up the great content 🙂
Imagine skating in crocs in irl😭
this is an amazing video
Thanks really appreciate it! I’m work on some more fingerboard reviews soon!
Nice vid bro
Use a tip of a click pen it makes perfect screw holes in the tape.
I thought you were good look at the thumb nail but yea I guess not
check out 8:08 the ollie he did to get on the rail was so bad LOL
Lol I’ve been fingerboarding almost 20 years, this was one of the first times trying with finger crocs 😂
thanks bro for showing us how to put the wheels on real detailed 😒
My screwdriver wasn’t magnetic a nd they only sent me 7 screws
Weird! I have always gotten 9 screws and 5 wheel locknuts. If you don’t have any extra screw, maybe try messaging teak tuning support!
@@stickyartfb I just took one off an old tech deck 🤣
@@NotGoodAtRaving teck deck screws work better on some of my boards cuz they are slightly longer.
Where’s your ASMR channel?
lol oh it’s coming summer 2022 gotta save up for a nice binaural mic 🤣
Nice! 🤙🏻
Great video 😎
I don't know if you know but Teak isn't pro boards, it's just intermediate boards. The boards are from china and so is everything else.
I agree ☝️Teak calls their boards and trucks pro. I think there decent quality! But since I got a better setup with a handmade board and dynamic trucks. I would not consider teak to be a pro board I think considering the shape is very standard.
@@stickyartfb Good to know that you know! And yes I've owned some teak products and they are pretty good.
You sound like dream
Bro was skateing in crocs
Did this all come together?
I bought these separate. But teak has had the 34mm wave board as a complete for $26 but has cnc plastic wheels instead of urethane
@@stickyartfb why does it advertise that it has urethane wheels
Thats pretty much the worst way to put on trucks and im sure you‘re supposed to put the lil washers back on after you changed the bushings.
Where you get finger crocs
I Made them 😎
Thats what i call a clen grip job
thanks boss!
got the same board and i noticed that the decal started coming off after a week
also what do i do with the spacers?
Did the decal peal off? Get ahold of teak if it wore down fro doing grinds it’s supposed to it’s a “real wear” graphic I believe and is made to look more realistic. If you got spacer trucks put them on the axel first then the wheel and then put the nuts on the truck 👍
Super clean setup. I got their progidy trucks and Apex ATP wheels on my tech deck performance deck. I'm thinking up upgrading to one of their 34mm boards but I was wondering does it have any concave along the board? And does it have a tail? (Longer/shorter end) couldn't fully tell with that super clean grip job done so fast 😅👌🏽
It’s med concave from what I can tell a twin shape deck… if one side is short i cannot tell. If you are looking for a directional shape Plike fingerboards on Etsy is my favorite mild to med concave And traditional long nose short tail (my current main setup)
@@stickyartfb awesome! Thanks for the reply I'll check them out
So buy one of these?? or a teck deck performance series?? I'm kinda new too these.
This is a great starter to intermediate setup! Techdeck performance series are nice too but hard to come by in stores. (Typically resold for $20-35) performance series don’t have bearings in the wheels or locknuts.
Where do we get those crocs! Lol
I Made Mini Crocs Shoes For My Fingers Using Polymer Clay here is the video of the process:
th-cam.com/video/qK3O6eD7lTM/w-d-xo.html
Where did u buy this
Amazon, link in video description. Also can be bought on teak tuning site
The rusty sticker needs to go
Viral
Teaks hardware is good, but their boards are not.
bad clips
nice tomica car i also colllect it
The grip job is so perfect HOW
Thanks a lot for the great video. It helped me a looot
Grip tape hob in my dreams😨
Quick pro tip.you want you're finger board tool magnetized.just get a magnet and stick it to both ends for a couple minutes that magnitizes it
dude this video is built asmr, pretty sick deck too
finally someone who know knows how to grip a board
You did not come out with fingure crocs on man 😂
hey sticky from a year ago
I would love to see more full length videos like this and quick question, how do you get followers/subs
The skate tool being magnetizable makes a HUGE difference
Bro how this dudes grip job cleaner than soap😮
The color of the trucks didn’t fit that well to this setup…
Silver or white would be nearly perfect and would balanced out all of the colors…
With more color would just fit baby blue (not sure if any trucks out there with that) and maybe even gold but on gold I think I should go with baby blue wheels to get a nice contrast…
But this, holy smokes, no Idee how you get to the idea that this would looking nice in any way…🙈
where u get the deck and stuff from
teak tuning
This is like a straight up asmr
great video though
nice video!
Thanks 🤜🤛😎
Love the longer videos ❤
please more of these