Great job. One suggestion is the hole you opened up for the larger cables I would get something to cover the sharp edges. I would also zip tie the cables to prevent them from too much movement as things heat and cool.
I was thinking the same thing, he didn't seem to notice the sharp edges could cut the wires, that could in turn cause the metal peg board to turn live/Hot so metal would need to have a good earthing also.
Came here to say this. Those jagged knife edges made me cringe when he ran the wire through. Seems like painting a wood (or MDF or whatever it is) pegboard might be a better way to go. Especially since most of it’s attached with Velcro anyway.
The screws are M8 capped hex screws for anyone wondering. As a tip make sure whatever stand off mounts you order come with drywall anchors and screws that fit inside stand off mounts to go into the wall. The M8 screws might take a little bit of drilling out of the peg board to make them slightly wider because they are a tiny bit larger than the holes. hope this helps someone. I built the same thing :)
Oh gosh, that is so gorgeous. Definitely goals for our office. I love how sleek it looks and the battery buckets. Definitely got me thinking haha. I absolutely hate the mess of wires charging everything before a shoot.
So satisfying. Wish I worked in an agency that only does video. I work in real estate, so the budget doesn't have the flexibility to get something like this.
This is great. I’d love to do something like this, but built into a pretty cabinet or bookshelf so I can close the doors and not be looking at it all the time. Thanks for the idea!
It's beautiful! I was just talking about something like this because I keep adding more and more stuff and it's a mess of cables at this point. This was super helpful! Nice job too!
Clean setup. I’d be worried about the batteries dropping faced that way. When I’m on the road shooting, I get the USB dual chargers for the gh5 batteries to save on space. Wasabi Power makes some. Then I plug 3 dual chargers into the wall and can let them charger overnight if needed and not play the game of waking up and changing batteries. They’re also nice on the run because you can have a 10000mah portable usb charger and can charge some batteries.
Everything is in that one main link in the description. Also just updated the info in the description as the product is constantly changing from Amazon. Sorry for the confusion.
@@Whiteinrevery Bro, it hasn't been updated with the correct hardware. The screws you purchased to make it all work are still missing. we been to hardware store 3 x trying to make this work
great vid, appreciate it! long-term after a few years now, what would you say are the downsides of this or what mods/adjustments have you made in the meantime that improved upon it? thanks!
the main mods I have done is turn it vertical instead of horizontal. Ive also added sections for V-Mount batteries and holders for Ronin batteries since I don't need the entire space to stand up the ronin.
Okay, I bought everything you have here, but I am having a HECK of a time bending the metal to get the cables through. You just used a screwdriver and pair of pliers?
This stuff is so cool is have to say am neither one of what you suggested but I have many things that need charging and am sick of it setting on my desk or my dresser or my night stand. I like clean flat surfaces it just looks better. that peg board am going to mount behind my wall mounted tv to hold all of are video game consoles and controllers such good things my friend.
I saw you comment and I just had to add my 2 cent. All you did was name/brand drop and ziptie chargers to the wall. Thats like asking guest to take shoes off at the door and your home full of cat hair and piss. Please Do better.
unfortunately I don't. I just took the stand off mounts with me to Home Depot and tried them out until I found the right size. Sorry I forgot what it was.
Neat. Bit concerned of cables being worm or cut with the sharp metal edges on the drilled/cut holes. Also Velcro is not a great idea, it tends to come off as the chargers (and the adhesive) get warm during use.
Our first batch of velcro came off within 24 hours. We updated our link to the new velcro we use and they have not come off ever. So get the high quality velcro and you will be set ;) Also, the metal edges don't dig into the cables for us but it is something people should be aware of.
Great idea, been looking for solutions like this. I would have put the chargers the other way around though so the batteries slide in towards the ground instead of towards the ceiling. Just so gravity can help keep them seated.
Thought of that as well, but wanted to read the percentage indicators right side up. Also, after 2 years, I have never had 1 battery fall. So it locks in pretty good.
Damn that's a beautiful sight! Just be careful none of the chargers or power strips get too hot. It happened with my PC cable management and the Velcro strips lost their adhesiveness. It might be worth securing any of the items that get a bit hot with something extra.
it actually happened to me and so I got better velcro that I linked in our kit that doesn't lose stickiness and fall anymore. learned the hard way and killed a charger to the ground. not because of heat though, because of battery weight.
Nice start! I would have mounted the camera and NP chargers so that gravity worked for you to hold batteries in place which would have not looked as nice aesthetically. Also a metal shelf between the charging levels could offer some protection from a cascade fire should you experience a battery failure.
Hey Caleb just wanted to know why you chose the ronin s over the crane 2? Reason I ask is because I avoided it due to the fact that the manfrotto plate doesnt fit on the ronin s. Just wanted to see your perspective on why you got the ronin s. Thanks
Great Video! I tried a similar thing myself but the glue on the velcro melted once the chargers heated up over night. Any tips to still make it work? Thanks.
I tried the same setup, the NPF batteries are too heavy and cause the chargers to tear off the velcro... Also, do you have any suggestions for charging V mount Batteries?
mastercheif1989 I updated my link with the proper velcro that won’t allow those batteries to fall. For V mount, I’d probably just set it on the shelf instead of hanging because of the weight.
I just had an idea: If you hinged this setup to the wall so that it opened like double doors you’d have a much easier time changing or adding chargers to it. More of a modular set up and a good bit more user friendly. Other than some blocks and piano hinges, I’m not an engineer so it might take some trips to the hardware store to figure out how to make that happen, but I think it would make foe a nice combo of functionality and adaptability. 😎
Thats a nice idea. However, the goal is to never have to get to the chargers or add to it, Which is why its all tied up permanently behind the peg board. If I want to take the chargers with me, I just disconnect it and I have tons of those charger cables separately that I can just grab if I need to.
Oh dang dat's nice! Imma need this
Great job. One suggestion is the hole you opened up for the larger cables I would get something to cover the sharp edges. I would also zip tie the cables to prevent them from too much movement as things heat and cool.
I was thinking the same thing, he didn't seem to notice the sharp edges could cut the wires, that could in turn cause the metal peg board to turn live/Hot so metal would need to have a good earthing also.
Came here to say this. Those jagged knife edges made me cringe when he ran the wire through. Seems like painting a wood (or MDF or whatever it is) pegboard might be a better way to go. Especially since most of it’s attached with Velcro anyway.
Forget about camera envy, I now have charging station envy! Top job!
👏🏼 Awesome job man! Stealing this and also subscribed.
The screws are M8 capped hex screws for anyone wondering. As a tip make sure whatever stand off mounts you order come with drywall anchors and screws that fit inside stand off mounts to go into the wall. The M8 screws might take a little bit of drilling out of the peg board to make them slightly wider because they are a tiny bit larger than the holes. hope this helps someone. I built the same thing :)
I bought the screws updated on the link and I think they don't fit. LuckIns stand off 1/2 x 2 inch
I purchased M8 (40mm) capped hex screws but they seem to go right through the holes. Should I add a washer?
Oh gosh, that is so gorgeous. Definitely goals for our office. I love how sleek it looks and the battery buckets. Definitely got me thinking haha. I absolutely hate the mess of wires charging everything before a shoot.
I came for the shirt, and wasn't disappointed. Good stuff dude!
dress to impress ;)
AWESOME!!! I will definitely look into this setup. The amount of chargers is crazy.
Just now seeing this video... This is literally goals man.. Hope to have something like this in my office someday.
This is a really great charging station you have. Nothing too complicated and helps save time in the long run!
Thank you so much for this video guys, we just ordered everything for our own studio in Atlanta.
where do you get the standoffs for the wall? Link would be great!
Absolutely loving this set-up! It's brilliant
Thanks so much!
Nice, exactly what I was looking for, thanks!
So satisfying. Wish I worked in an agency that only does video. I work in real estate, so the budget doesn't have the flexibility to get something like this.
Super clean - great job and thanks for sharing
This is great. I’d love to do something like this, but built into a pretty cabinet or bookshelf so I can close the doors and not be looking at it all the time.
Thanks for the idea!
Might not be a good idea to close a cabinet full of electrical devices, could heat up and potentially ruin them or worse cause a fire
I'm working on converting a guest house into a studio area so this is perfect 😍 😍 Thank you!
That looks amazing! So clean I love it!
Installing this in my office right now!
It's beautiful! I was just talking about something like this because I keep adding more and more stuff and it's a mess of cables at this point. This was super helpful! Nice job too!
I just found this video this morning, totally went out and bought a matte black peg board :)
Mate, this is so over the top! I love it! :D
awesome and super effective idea u got frm ur video
Thanks a lot
You guys are so awesome!! Really enjoyed this video and setup! Keep it up!
You've saved me from the disorganized photographer's INSANE ASYLUM!!! Thank you, thank you, thank you!!!
You are so welcome!
DUDE THIS IS SICK NASTY CLEANNNNN.
Always come here for the shirts and fresh fades, but mean this monochrome goodness is de-lishhhh.
Clean setup. I’d be worried about the batteries dropping faced that way. When I’m on the road shooting, I get the USB dual chargers for the gh5 batteries to save on space. Wasabi Power makes some. Then I plug 3 dual chargers into the wall and can let them charger overnight if needed and not play the game of waking up and changing batteries. They’re also nice on the run because you can have a 10000mah portable usb charger and can charge some batteries.
great video men! thank you!
Great idea! Definitely going to put something like this in my new office next month!
Are you able to use the GH5 with the ronin and a monitor together?
This was awesome! Can't wait to get mine all set up.
What size are the screws that you bought from Home Depot?
We are still on the hunt for them!
What size screws did you buy for the standoffs? Appreciate the vid, I bought a larger version of this based on your tutorial!
I like this a lot. I have xt4 and xt3 so the chargers are a little different but I think this could potentially work as well.
REALLY COOL SETUP. Thanks for the video.
Awesome clean setup.
Love it, looks amazing!
pretty cool set up! are the battery chargers on the left all upside down now though?
gonna finally tackle doing this
Def making one of these!
Thank you so much for sharing!! I love the idea! So neat and clean!!
This is great. Price is really good as well. My current charging station is a mess! I will definitely give these a look.
Love this system! Curious about the wall stand off mounts, having a hard time finding exactly what they are and where to get them, any tips? Thanks!
Updated the description!
Once they are charged and your heading out to shoot, do you have a case to hold all your batteries, or do you toss them all in the camera bags??
everything listed but the wall standoff mounts- and this is the hardest thing to find
Everything is in that one main link in the description. Also just updated the info in the description as the product is constantly changing from Amazon. Sorry for the confusion.
@@Whiteinrevery Bro, it hasn't been updated with the correct hardware. The screws you purchased to make it all work are still missing. we been to hardware store 3 x trying to make this work
great vid, appreciate it! long-term after a few years now, what would you say are the downsides of this or what mods/adjustments have you made in the meantime that improved upon it? thanks!
the main mods I have done is turn it vertical instead of horizontal. Ive also added sections for V-Mount batteries and holders for Ronin batteries since I don't need the entire space to stand up the ronin.
Holy crap this is what I’ve been looking for! Much appreciated 🙏🏻🙏🏻
Still good two years later🤘🏽
Hello, Congratulations. 👍 Cool. I am impressed. Smart. 👏👏👏
Dude I love this! Might just have to make one myself! Thanks for making this vid!
Okay, I bought everything you have here, but I am having a HECK of a time bending the metal to get the cables through. You just used a screwdriver and pair of pliers?
Just what I was looking for, thank you
This is awesome guys! We will definitely be building one of these this month :) Appreciate the creative idea and tips.
Looks cool. Would be a pain if you needed the chargers for traveling even with the velcro.
Great 💡
Where do you get the spacers for the wall a link would be great
all products are in the description of this video in the main link ;)
@@Whiteinrevery the Standoff Screws link is unavailable can you please update it
Yeah! more content! Keep it up!
Nice video! I love your shirt bro
Scotch and Soda ;)
Greetings. I like your video, it has good information. In this video I saw a NAS on your table. What model is it ?
Great work! 👍 BUT... I hope you've discovered hole saws and larger drill bits since 2019! 😛
That is freaking awesome!!
This stuff is so cool is have to say am neither one of what you suggested but I have many things that need charging and am sick of it setting on my desk or my dresser or my night stand. I like clean flat surfaces it just looks better. that peg board am going to mount behind my wall mounted tv to hold all of are video game consoles and controllers such good things my friend.
This is so much better than my Alabama charging station, which is just a rubbermaid tub.
ummm, is it though? that definitely sounds amazing
I saw you comment and I just had to add my 2 cent. All you did was name/brand drop and ziptie chargers to the wall. Thats like asking guest to take shoes off at the door and your home full of cat hair and piss. Please Do better.
the screws you bought from home depot...do remember the size you bought by chance?
unfortunately I don't. I just took the stand off mounts with me to Home Depot and tried them out until I found the right size. Sorry I forgot what it was.
YES to this! Looks so sick
Where did you get the wall stand off mounts?
Nice idea.
Neat. Bit concerned of cables being worm or cut with the sharp metal edges on the drilled/cut holes. Also Velcro is not a great idea, it tends to come off as the chargers (and the adhesive) get warm during use.
Our first batch of velcro came off within 24 hours. We updated our link to the new velcro we use and they have not come off ever. So get the high quality velcro and you will be set ;) Also, the metal edges don't dig into the cables for us but it is something people should be aware of.
Just what I was looking for
Obsessed. Have to find a way to do this with my tools. Thanks for the idea!
wow its very helpfull. thank you so much
Great idea, been looking for solutions like this. I would have put the chargers the other way around though so the batteries slide in towards the ground instead of towards the ceiling. Just so gravity can help keep them seated.
Thought of that as well, but wanted to read the percentage indicators right side up. Also, after 2 years, I have never had 1 battery fall. So it locks in pretty good.
Guys, this is awesome!
Please tell us where you got the stand off wall mounts. I’ve been to every Lowe’s/home depot and can’t find them anywhere.
IMDR3W from amazon. Check our kit link in the description for the links 👍🏼
The new updated mounts don't fit naturally. did you bend the back part to make them fit ?
Damn that's a beautiful sight! Just be careful none of the chargers or power strips get too hot. It happened with my PC cable management and the Velcro strips lost their adhesiveness. It might be worth securing any of the items that get a bit hot with something extra.
it actually happened to me and so I got better velcro that I linked in our kit that doesn't lose stickiness and fall anymore. learned the hard way and killed a charger to the ground. not because of heat though, because of battery weight.
Nice start! I would have mounted the camera and NP chargers so that gravity worked for you to hold batteries in place which would have not looked as nice aesthetically. Also a metal shelf between the charging levels could offer some protection from a cascade fire should you experience a battery failure.
Hello, what kind of nas is that on your desk in the background? Looks like it has two 2 slots for 2.5 drives.
Simple and effective! Love it.
Hey Caleb just wanted to know why you chose the ronin s over the crane 2? Reason I ask is because I avoided it due to the fact that the manfrotto plate doesnt fit on the ronin s. Just wanted to see your perspective on why you got the ronin s. Thanks
Great Video! I tried a similar thing myself but the glue on the velcro melted once the chargers heated up over night. Any tips to still make it work? Thanks.
Where did you get those spacers for the wall to screw the peg board in?
Everything is in the main link in the description.
Nice and organized!
nice but done the battery slip out from those chargers???
never fallen out and has been over 2 years now.
@@Whiteinrevery cant find those chargers for sale in the UK :(
Why not have the cords be fed around the pegboard than through?
Very neat.
Love this. I just have a supper long power strip on the wall that can charge most of my stuff all at once.
Why have the ronin built?
You transport it built as well?
definitely need this.
Hey, are you using a Blackmagic Pocket on your Ronin?
Very awesome!
WHERE DID YOU GET THESE AWESOME SHOE???????????????? PLEASE LET REPLY!!!! THANK YOU SO MUCH!!!
Nisolo ;)
That's a good looking dude with a good looking set up....where'd you get the shirt bro?
haha I get asked a lot about that shirt. Found it at Scotch & Soda ;)
BTW, GREAT CONTENT AS ALWAYS!!!
You could get the ronin s charging adapter to have more space
Anyway, great solution and nice to see, thumb up!
That's so awesome!
wow ! pretty sick
Loooove this 😍😍
Cool, Thanks man
Velcro? does that really hot a charger and a large 2 pound battery?
the updated Velcro link I reference in our charging bay link works wonderful!
I tried the same setup, the NPF batteries are too heavy and cause the chargers to tear off the velcro... Also, do you have any suggestions for charging V mount Batteries?
mastercheif1989 I updated my link with the proper velcro that won’t allow those batteries to fall. For V mount, I’d probably just set it on the shelf instead of hanging because of the weight.
I just had an idea: If you hinged this setup to the wall so that it opened like double doors you’d have a much easier time changing or adding chargers to it. More of a modular set up and a good bit more user friendly. Other than some blocks and piano hinges, I’m not an engineer so it might take some trips to the hardware store to figure out how to make that happen, but I think it would make foe a nice combo of functionality and adaptability. 😎
Thats a nice idea. However, the goal is to never have to get to the chargers or add to it, Which is why its all tied up permanently behind the peg board. If I want to take the chargers with me, I just disconnect it and I have tons of those charger cables separately that I can just grab if I need to.