Nissan 350Z - How To Disable Stability Control (VDC)
ฝัง
- เผยแพร่เมื่อ 17 ธ.ค. 2020
- The button Nissan should have fitted at the factory but chose not to. Whilst you can turn traction control off you can’t turn stabilty control off. Until now...
The soldering kit I use:
www.amazon.co.uk/shop/roadand...
CS2000 VDC Disable Kit:
www.cs2000-z-tech.co.uk/colle...
This show is made for entertainment purposes and whilst every effort is
made to ensure the information included is correct is should not be
relied upon as accurate and is used at your own risk. It is the sole
responsibility of any persons(s) using the information / advice
contained within that their level of competence is appropriate for the
task they want to complete. All users should have all tasks checked by a
professional qualified person where appropriate. Road & Race and
individuals associated through ownership and contribution will not
accept and liability for any loss, damage, injury or negligence direct
or indirect for use of the information / advice contained within. - ยานยนต์และพาหนะ
![BOWKYLION - เจ้านายคะ (work-life imbalance) [Official MV]](http://i.ytimg.com/vi/6bFj8G2pOi4/mqdefault.jpg)
The 90s computer music vibes were awesome. Also, gonna get me one - thanks for the video.
Great finally update again
Nice one. Happy Christmas
Thanks, you too!
Lovely soldering. I would recommend using a step drill bit rather than a spade drill bit to cut the hole in the plastic. Gives you more control over gradually increasing the size of the hole and without ragged edges. A spade drill bit is more suited to wood based materials.
I know im randomly asking but does anyone know of a method to get back into an Instagram account?
I somehow forgot the login password. I love any assistance you can give me.
@Isaiah Preston Instablaster ;)
@Antonio Chris I really appreciate your reply. I found the site on google and Im in the hacking process now.
Seems to take quite some time so I will reply here later with my results.
@Antonio Chris it worked and I now got access to my account again. I'm so happy:D
Thanks so much, you saved my account!
@Isaiah Preston Happy to help =)
Random question unrelated to the ztech stuff (although I do have a burnout box installed) but what are the 2 connectors at the back of your centre console? As I don’t have anything in my centre console for the connectors to fit to although they are there..?
I have the opposite problem in my Fuga. There's a button to turn VDC off, but not traction control lol
Great vid bud
Cheers mate
My traction control button is on the dash to the left of the steering wheel did they put it on the center console for other years and what is the other factory switch do located there?
What numbers did u cut from the module? Having trouble finding a forum about what wires are what. I don't want to be wrong 😭
Where's the E61?
Glad that you kept the narration to the minimum without making things unclear 👍🏻
for some reason i can’t find that box. mine is convertible
Nice video! did you get the one with the Burnout mod or the normal one?
Thanks. Just the normal one.
Yasssssssssdd thannnnnnnk uuuuuuu!
you're very welcome
Can this be done on auto models?
Hum? I'm now wondering if my stability control box might have gone bad or a possible sensor. Because those same lights on my dash came on spontaneous for no reason while driving. They are off when I turn the car on but the moment I start driving poof they come on. Have to look into that. great video and idea for the track.
check battery wiring and brake fluid :)
Happy to give your video its 667th like
Lovely Jubbly, anyone else this chap look a bit like a young Steve Wright off the radio?
Don't insult the guy!!
Will this work on a 2005 G35?
That's a brilliant mod!
Thanks mate!
What was the clamp you were using to hold the wires while you were soldering please?
it's called a solder helping hand
love it, id like to do it too. Can i buy a factory switch and use that instead of drilling one into the blank though?
You can. I have aftermarket seats in my car, so I ended up utilizing one of the heated seat switches as the switch for this modification. I mainly did it due to the fact that you cannot tell anything has been tampered with.
My 2006 has a VDC button from factory
This seems a bit over kill, why not just get a simple 2 pin switch and intercept the power cable for on and off? Also it's far better to crimp than solder as it gives more flexibility and won't crack and break the connection and you can always remove the mod if needed.
I was thinking the same thing. It would be much simpler that way. That’s how I did it.
My 04 Z has the traction control switch on the dash to the left of the steering wheel. Did some years place it on the center console. What is the other factory switch next to it?
The one next to mine is light washer button
Hey bro, love the video. I've been trying to get my hands on a burnt orange shift knob since it matches the interior of my Z, any idea where I can find this in america (or more accurately canada)?
i can ship one over.
conceptzperformance
So one of the complaints with the standard Z was that to avoid 'agitating' the VDC, you had to drive the car a certain way on track and that meant you couldn't really trail the brakes into a corner if you wanted to, does this mod allow for better modulation of the brakes without any interference?
Yes. No interference.
@@RoadandRacetv That's nice, can you now get the tail involved by trailing brakes into the corner entry? I believe earlier, you sorta had to get the braking done a bit earlier, and then take a neutral to understeer stance mid corner?
Need that on my Infiniti Q60 red sport.
I read the same right up his you but he said it was the orange wire that we needed to cut I saw you cut a white wire is there a difference?
Did you ever get yours done? I just followed this video and it didnt work lol
I have a vdc button near the fuel filler cap button. My 350z is a track model. Are the standard models without any stability control buttons
I ahve the same button. I believe that only turns off traction control.
@@RoadandRacetv aah that makes sense, I've always wondered what to do with that mysterious switch blank. Maybe I'll link it up to an exhaust flap mechanism one day. cheers
@@rollei35mm Correct, that button disabled the TCS (Traction Control System), but not the VDC (Vehicle Dynamic Control) which is what grabs the brakes. Scared me half to death the first time mine did that!
06 G35 6MT has VDC button. Disables traction control & stability. Can also drift and burnout without modding pin 101 either....
What does the circuit board do? You only touched two wires...
I did this mod to my G35 years ago but just used a 1 dollar 2 pin switch to cut the power going to the gyroscope, if all this board does is that then an $81 (after conversion) kit is pretty unethical
Yeah I’m wondering what the purpose of the microcontroller is, can’t you just wire in a switch?
Hey - awesome mod!
Do you have any details on the wiring?
I can't figure out how many wires your switch has. The ones I see generally have 4:
- Earth
- Dash light (so a secondary light turns on when the car turns on - I don't care about this)
- Power In (yaw sensor cable)
- Power Out (yaw sensor cable - other side)
(the latter two connect when the switch is turned on to connect/disconnect the yaw sensor).
I'm wondering how your power tap works to turn on your LED light?
Did you ever figure it out?
do you know if it is working with other cars from renault-nissant group? i neet to do this with a 2.0 tce megane 3, the esc turns automaticly on after 40 km/h
Doubt it. Maybe contact the manufacturer?
@@RoadandRacetv well that's how is intended to work, only on the rs models it goes fully off
Interesting. I may need to pick up one of these for my G35 coupe. Gyroscope wires appear to be the same.
Yes, I believe they are
The wires are exactly the same for the G35, just the trim removal is obviously different, i am Cs2000 by the way, the guy who makes the kit :)
@Computerstar2000
Can you describe what the difference is between using the kit and just cutting power to the gyroscope using a $1 switch? Everything advertised as a feature of your pcb seems to be something a simple 2 pin switch can achieve, so I'm having a hard time understanding why your product exists.
@@computerstar2000 can you tell me what gauge wire you are using?
@@breaksk8r446 The module wires are 18AWG silicone coated wires, the wires for the button are a little thinner at around 20AWG with standard PVC coating.
Do you know if this works with the HR?
Yes
This doesnt work. Several people have tried and it just puts the lights on the dash permanently??
I did this mod as per video and now I have no power to gyro at all. All fuses are sound but traction and abs permanently off.
Hey, did you ever find an answer to this, I've got the same issue.
@@jdmsuki3254 no mate still working in it
@@TwoToneTaj ah, damn. Hopefully you can get a fix soon! Thanks anyway bud.
Any luck with this?
I've found just hitting the VDC button under the steering wheel area to be plenty of stability removal. The car will do donuts without interfering.
The YAW sensor is more for the stability control i.e. when you go around a corner and one wheel loses traction it will cut power to that wheel. Different to throttle induced traction loss i.e. traction control
Does it work on a 370z?
They sell a version for the 370
I forget, does this turn off brake lights or no?
Nevermind, i unplugged the abs module instead, it's been me and the car for almost a year, snow drifts galore.
@@revvolutions which aba sensor ?? And are you auto or manual? I can drift in my auto but once i tap the brakes it bogs and wont rev back up until your off the brakes
What about a 2017 maxima
If it has the same G-sensor module (many Nissans do, including the G35 and G37) then yes, it will work the same way.
Why its better than a toggle switch on the G sensor?
Would you want to do this to my 350z
Surprised by the lack of narration in this video, mate. Makes it kind of boring to watch honestly.