350Z Delete Traction Control FUNCTON BEAST: S1-E9
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- We fully disable the traction control on Evan's 350Z. By putting a switch on the vehicles Yaw sensor we disable VDC (Vehicle Dynamic Control), Limited Slip, and ABS. This lets you smoke tires to your heart's content.
Check us out on Facebook: / functionbeast & / functionmotorsports & / evan.fitch.5 & / jesse.bonnier
and on Instagram: / functionmotorsports & / evanfitch & / bonnierjesse
and hit up the Shop's website: www.functionmot...
A better idea would prob be to remove that spare plastic button next to the seat buttons on the center console and drill that out instead of the console itself.
yeah cuz some nut on ebay wants you to pay 500-1000 for their stained up one...LOL
My car does not have that box and the button on my dash it TCS not VDC? Im confussed
Where did you get that switch
Can I just cut it too delete it? And live like that because I don’t need VDC light?
mama didnt rise no bitch cut it !!! jk jk :)
My 06 doesn't have that behind the shifter,I was looking. Instead it has something else behind the E brake right under the cubby box. Is it the same thing that you know of?
you ever find the answer ?
What tools do you need to wire it to a switch?
will this work for a 05 g35 coupe 5 speed auto? same color? orange?
I have 2005 ani edt they said to replace the module it will be 1600 but since it's really not needed I want to remove abs etc... Since the car is not communicating with the module which is the reason for all lights how can I remove this? It's my daily car I don't drift
i cant seem to find my yaw senson behind my shifter where else could i find it on my 350z it is a 2003
Should I disconnect the battery before cutting the wire?
TheEpeebles It's probably a good idea. I don't think it's strictly necessary, but any time you're doing electrical work it's probably best to disconnect the battery.
Hello guys. Here turn on only ASR and ESP light under my "rev light" at midle! ABS on the left side dont! I can better driften but still no BurnOut! Any idea? Thats mean still no Break and Gas same time!!!
I unplug a thing behind some kind of abs or something for the brakes. Have same effect?
Any suggestions on doing this for a 370z nismo
Will my brake lights still work? I know of you pull the fuse, it kills pretty much all electronic assists but also prevents your brake lights from coming on.
Benjamin Kaplan yes. On our car they work perfectly.
thanks for the quick reply! Does the Amp/volt rating on the switch matter?
Benjamin Kaplan I don't think so. The switch should just intercept the signal to the VDC and effectively render the traction control and stability assist "off"
Does this work on a 2007 350z still just splice the orange wire
Shouldn't be any different.
I disabled the need to mash the clutch in to crank it. It suck to have to set in ur car mash the clutch to crank if ur just warming it up on a cold morning. Toyota Tacoma had clutch safety button. I just taped in the switch on my clutch put it natural and crank it.
The better way to do that would have been to just relocate the switch and press it by hand without the need to actuate the clutch pedal.
Making that connection activates and deactivates the VDC or stays activated for always
Hi! What’s the model of your long shift knob? I need the same, cause my is too short
It's actually a standard Nismo shift knob on a no-name brand shifter extender. If I recall correctly, we got it on Amazon for about 10 bucks.
Thank you
I have a base model 05 that I put a lsd differential in. I dont have a button to turn vlsd off, and believe I'm getting restricted. Will this work for me?
If your car has the yaw sensor like in the video, then yes, it should work. However, I think this feature is eliminated completely on the base models.
Does the ABS system stop working or no?
Im assuming the 350 in this video does not have an open diff?
It is welded.
If this VDC module/sensor is bad, can it throw a code or check engine light?
I'm sure it would
When I pulled my center console and shifter, I do not see the sensor. It is almost as if it was completely removed by a previous owner. The thing is that there are no lights on the dashboard showing anything off, and when i try to do a donut the car is cutting off fuel. Where could the sensor be? My 350z is a 2004.
Alizain Parekh is it automatic?
Long shot I have the same issue rn did u figur if our
If you have a base model or an automatic, I don’t believe you would have this module.
is it the same with auto?
I’m wondering the same thing. I did all this but my abs light never comes on.
Does the abs light stay on? I wired my switch and it flashes on then off. My slip me vdc lights are on tho
The ABS light stays on in our car.
It is the same for a Nissan Fuga (G35), except the wire you want is the Pink one.
A fuga is not a g35. A fuga is fwd..
@@kobiburgess3945 I own one, they are rear wheel drive. Dunno where you got that Idea from.
Cool video thanks! But there is a free switch place near the ass heater why dont u use that place? :D
I was curious about this too. There are aftermarket switches that are readily available and fit perfectly within this hole. On mine, the toggle I have is a similar style rocker switch to the seat heater switches and also has an orange light. Looks factory.
when i want to drift... would i then have to turn off the traction control and as well turn on the newly added switch?
Yes.
That's a bummer. I want 1 switch I can just leave off. I have a tendency to forget to turn off the VDC sometimes between laps.
Question for you guys I have a 07 base 350z would it still b the orange wire ?
Our car was an 04. Don't see why it would be differnt though.
This is for 350z's with open diffs bro you have a lsd why would you want to do this
@@Fadz-zg6bt this is for every 350Z. If you do not disable the VDC, it will apply the brakes to rear wheels in an effort to straighten the car out irrespective of your differential setup.
@@FunctionBeast my cousin has a base model hr he doesn't have traction control and he drifts like a pro
The problem I have is that I don’t have an orange wire?... so what colour would it be? Please respond
Same problem
What year do you two have
@@enriquero432 2004
@@oakley5288 i mean i dont know if it'll be the same case for you but i had a black wire that i noticed no one else had and it also seemed to be plugged into the same place to where the orange wire would be.. i was pretty confident it was the wire and just said fuck it so i cut the wire and it was the right one..
What gauge wire?
I have a 2003 350z is it the orange wire for mine too ?
Should be
Thank you
Any bad things to look out for after doing this ?
@@mydogisdie27 not really. Your dash is gunna light up with a couple warnings, but thats normal and perfectly okay.
What year and model is your Z and what guage wire was used? And this removes VDC and Traction control completely? Please respond back thank you.
The wire is 16gauge. Its a 2004 Base model.
So I did all this. Followed the exact directions. When I flip the switch the slip and vdc light come on but abs light doesn’t. Anybody what’s going wrong?
This only disables the VDC/TCS - the yaw sensor has nothing to do with ABS. If you want to disable ABS, you’d need to remove the ABS fuse or find out a way to disable the ABS module via a toggle.
@@Cleavatr0ni cant seem to find my yaw senson behind my shifter where else could i find it
When I hit my switch abs come on then goes right back off! Is it supposed to do that
James C Dahl on our car, the light stays on until you shut the car off. I'm not sure if it's a difference between model years, as ours is a very early 350Z. What year is your car?
Function Beast my car is a 05. When I did this vdc/slip stays on. But my abs just comes on for a sec
James C Dahl same for me. Did you figure it out ?
The ABS should not stay on as the yaw sensor is not the ABS module. It should blink for a second, but that’s it.
Where can I get this switch ??
Any auto parts store for like one dollar.
Got an 04 g35 ..... Automatic.... I know I know...
But it was a steal for 2k and the thing is fast as shit so I'm not too upset with it being auto
(insert people's comments about it not being manual)
Anyways I am kinda bummed I can't do actual burnouts with it, sits at 3grand and kind of spins the wheels, would this set up be similar to mine before I go taking shit apart? I mean theoretically it should if I just delete traction control and keep it in to first in "sports mode" lol right?
You need to get rid of abs for that, left foot braking doesnt work with abs
shit anymore manual are old news. Autos with shift kits are the new shit.
Hello. Does this delete both ABS and TCS on the Z ?
Or just TCS ?
Thanks
LowKi_z33 ABS and TCS
that other video said...No!!
Does that shut off traction and ABS??
r0mulyni2 only if you have a switch wired in and cut the power and then turn it back on will it kill abs and when you go to turn off the car and back on it will reset like normal
FaBian castillo awesome thank you
Why do people do this and cut a ecu wire?
Because some people are simple-minded. Cutting into your ECU is the last thing you should be doing when options such as this one exist.
but i cant do a burnout :( please help...
Delete abs
How to rev 9000 rpm in z350?
Uhhh... With like... Literally a full motor build. I'm not sure what you're looking for from this video and your question. It's like, universes apart.
Function Beast actually, I’m trying to bounce the rpm but it won’t. it’s factory locked at 7000. i just want it to do more rpm like 7500 or 8000 and bouncing. don’t know what to do!
Can you do stand stills with this?
Brake stands?
Yes.
Take it the other wire a ground
What if let's see... I DON'T HAVE A BUTTON TO TURN IT OFF!!!!!!
Wouldn't that mean your Z is not equipped with VDC.
That means a you probably have a base model and you should get an lsd and your car wont even know its spinning