@teensierpython-4565 One of the best ways to have a high quality 74, all the Bulgarian kits are completely gone and have become extremely rare and expensive.
Wrong gun to do it to! I wonder if the owner knows what it was worth before they destroyed it forever. 5.45 guns are bringing huge money and this is where the bubba with a Drexel comes in.
Not really interested in installing an Alpha kit myself, but I stuck around for this whole vid because you made it pretty enjoyable to watch and informational. Well done Caleb. I’d love to see some more full length smith videos.
Tip: stuff a small cloth into the receiver during the dremeling/filing to prevent the metal dust and shavings from dropping into the receiver, fire control group and especially the chamber and barrel.
If you have any grease on those fire control parts for lube you will make grinding compound out of it! It will not simply blow out. You will have to detail strip and use brake clean or similar gun scrubber to get the grindings and contaminated lube out. Then relube it all again. A rag stuffed in there will be a major time saver!
I am surprised that they get away even with this and don't get strikes from TH-cam. They were giving them for people putting on suppressors... Don't say I like that, just saying they are one bud hurt idiot away from getting there channel deleted 😢
@@vladimirmihnev9702 They don't monetize their content, because they're a retailer. If you're a content creator and you want money from advertisers, then you need to meet stricter content guidelines.
I would also recommend if doing this installation to put some cold blue on the section of exposed metal and don't forget to use some oil and wipe off any excess oil before installing the rear 1913 Block. The cold blue will stop rust from occurring and the oil will neutralize the corrosive effect of cold blue. Same for the aluminum parts but instead you will use aluminum black followed by the oil and once again wipe off any excess.
@seijiroukikuoka5975 you are probably a lot of fun at parties. Equipment failure in the field, lol, what field are you talking about? The range, I hope. That stocks hinge is about as brittle as your sense of humor, the rust is the least of your problems. Let's stop pretending these range toys do anything more than the occasional trip to the range.
@@CalebSavant Heck yeah. I have all the furniture you ordered headed to me for an ak build. I'm infinitely more confident and prepared with my Whippersnapper dremel and an old-school pillar file.
Caleb instructs like he has done hundreds of these. All of his instructions are easy to follow and very informative like a real class instructor. You NEED to make more gunsmithing videos as I will be building my own from scratch from now on. I just finished my first AR with all parts selected/installed by myself including the PnW for the muzzle device.
Very useful video. I appreciate you showing how to do this rather than just showing finished products and describing them. Lots to learn here from a pro!
Probably the best instructional video I have seen. Very detailed and the way he instructs keeps it interesting. His demeanor and humor is what makes an hour video worth watching the whole thing. His suggestions and methods are exactly the best way to do it. I just outfitted my AK-74 with each of these upgrades and I am impressed at how solid it made my AK feel. Love Midwest Industries furniture. I have several of their products on multiple firearms that I own, especially their handguard so if your thinking about doing this to your AK then this is the video you want to watch. It is an excellent video.
I remember buying full Romy kits (barrel included) for $59.99 back in 05 ish (even the WASR 10s were $289.00). I still have all of my build jigs, 20 ton press, spot welder etc but the prices on kits have just been insanely expensive for many years now. It was fun building many different AKs and experimenting with different furniture like this but it's too expensive for me now.
@Yeedo420 Oh man, Aks were so cheap. Even the top end, premium new ones topped out at about 600-650. Even the old Mosin nagants were 79 fresh out of the box of cosmoline never used, now they are 400-450. It's just crazy now
Absolutely love this type of content. Keep it up. My only critique of the install is leaving the bare metal under the 1913 adapter. If you live in a humid area that will start to rust pretty quickly and it's not an easy thing to see once it's assembled.
Midwest Industries makes awesome AK accessories!! When filing where debris can fall into the chamber area, I stuff a rag into the receiver to block it off. For example, in the case of the rear tang, I would stuff a rag to the receiver just behind where the hammer assembly is. Once done filing, invert the receiver (filed side down) and remove rag.
Caleb, Thank you for your Clear and calm teaching on this video & its always a pleasure to watch and see your gunsmithing/teaching. I too have built AR's, and started on building AK's. And the more know-how & Information is Key. Thank you again. Be safe & take care
I've watched 100's of gunsmithing videos and everyone is so heavy handed, they are very rough on guns, drives me nuts. I appreciate watching someone that is careful with all parts and how they are removed.
Even though this is as simple as removing the factory stuff, then reinstalling new stuff "essentially" the same, just with a few extra screws.....i still like these long, in depth videos. We need more of these.
Was interesting to see what decisions Midwest made versus something like Zenitco. I really like the extra tensioning screws Midwest added to the handguard, great idea. Thanks for the cool video.
I was looking everywhere for a video a couple of weeks ago. I bought my first AK and got the complete Alpha setup. I really love the stock the most. But I had to watch this to see if he did it differently.
For anyone cringing like myself at the dremel work, which I know is necessary at times.. Midwest makes a version now so you dont have to cut the tang in the rear to gain your pic rail. Grabbing that one myself, the handguard just came in and im waiting on my dust cover from optics planet! Cant wait to do my swap, great video Caleb! 👍
AWESOME video... excellent job explaining exactly what to expect and reiterating being patient with fitting. I really miss my Fix It Stik set, unfortunately my garage was robbed and the thieves got away my most valued smithing tools. FIX It Stik makes it so much easier when working on your guns. Keep up the great work and videos
That sucks but the nice thing about an Ak is that you dont need expensive tools to work on it. I did the same job for a buddy with cheap hand tools from home depot. I remember the first time filing down the furniture and thinking about how badly I didnt want to ruin his new gear. Hope you can recover your tools.
As a guy born and raised in Iraq glad to see this AKs 47 upgrades, our AKs used to be bear bone, inaccurate and beat up . Thank you Caleb for demonstrating these installations .
I have beautiful Nutmeg furniture on mine so I don't think I would ever convert it like this, but I really enjoyed watching the process. Very well presented. If I ever find myself in possession of a spare AK, this would be a cool kit to throw on.
Like the video. I do hope you normally have a handle of some kind on the file tang. Without one, the tang can be very dangerous! Especially when using on Lathe etc. That kit install was very thorough. Thank you.
That's an old piece of advice that I learned too in gunsmith school. Turns out, at least with modern files, it's no longer true. Fireball Tool built a machine to test this and the results were essentially the same between push and lift vs push and pull. It's a great video that you should check out. I've stopped lifting files on the back stroke except when I want a cleaner finish.
For my KR-103 side folder, I had to relieve a small portion of the upper handguard cover to make room for the sling mount. About 1/8" x 1/8". I also had to fit the recoil spring locking tab to fit the rear trunion. It was about 0.003" too thick.
You talked about doing a whole video on filing. I got a whole semester of filing for two hours a day with a Holland & Holland repair shop gunsmith for an instructor. “Flat & square lads” is permanently engrained in my memory. I rarely pick up a rotary tool theses days.
A cool video! Not that I need an Alpha kit or an AK myself, but having a real technical video on this platform cannot be underestimated :) (Though I think a gas tube locked in place forever is not a good thing for an AK, but that has nothing to do with the quality of the video). It was just a pleasure to watch how Caleb was getting the job done!
For such a nice ak, you should have put some sort of finish over the bare steel from the file, and maybe touched up the aluminum, however mostly the steel. Otherwise, pretty sick, I am however a regular wood stock purist so that hurt to watch.
I wonder if Caleb knew how much these old AK74s go for on gunbroker before he cut off the stock tang… might’ve wanted to do that with a WASR instead. Ouch
looks nice but gas tube (one of main reasons of malfunction during continuous firing) became harder to reach for cleaning : have to deal with screws or handle it in same way as barrel. probably I will not take this to combat but still looks great
PLEASE DO A VIDEO ON FILEING!!! Cover it all! People really have no idea there are tons of different files. But most importantly, it's an absolute art to use one correctly.
My tip is use plenty of tape around where one will be dremeling. It will help with giving at least a tiny bit of protection to metal you don't want to remove, and it provides some good guidelines with good contrast. If you are very concerned about cutting into a base metal I will actually put a piece of sacrificial sheet metal stock between .010 and .030 thick on the part, then wrap that in the tape. That way if I do nick the tape, there will be some response. Especially if it's brass or something.
We did this to a couple Bulgarian and a Valmet over the years. We never advise the customer to not make modifications to a "valuable" gun. Value is ALWAYS determined by the owner.
Cool I actually have that dremel . My only complaint was it to bulky for precision surgical use . I didn't know that accessory was a option or avaliable. Now after the video I'm pricing one . Cool AK upgrade. I'd love to Try this modification. Looks awesome.
You’re awesome man, very informative to the point, respectful and patient with your craft. I really appreciate that, no rushing making sure you’re points are clear enough for the people in the back to hear it clearly. Great tutorial! 🙏🏽💯🤘🏽
I’m not an AK person but the way you did the instrumental video made me want to check out the whole thing and look for other gunsmithing videos of your. Good work young man!
That was an absolute joy to watch. Super cool! More more more! Lol. Gunsmith an AK bayonet lug onto a AK that didn't come with one on the gas block. Like the Yugo M70 where they didn't come with the legit gas block with bayonet lug and nade launcher sight.
That is one nice ak after the upgrades , thank Caleb for this video , clear instructions , section by section break down and most of all … patience 😂 something I’ll work I. . 👍🤙🤣
@ratagris21 Well Sigmund Freud should say there's significant signs of Sigma starting with the AK showing signs of stigmata! Hehe. Next I guess will be the Omegas?
I would've done some blueing on the steel after I finished filling for the 1913 adapter.... IF I would've, but I currently drooling over having such a nice AK parts kit
Put a handle on that file and you'll get a lot more real estate to file with. I like using old golf balls for file handles, they fit in the palm nicely.
Yup, I have been doing it for years. You can drill different sized hole in different areas for use on several different size files if your short on golf balls.
I’d do this to a century arms or any other American made AK but not an authentic com-bloc AK or non matching kit. Very educational ofc, I would like to consider this in the future.
There are some good stock adapters out there these days that don't require sawing the back of your prize AK off. The sighting mounting system may be interesting tho.
I love everything except when he filed the handguard to fit it. The whole point is too hammer the handguard in so it friction fits to the weapon allowing rigidity to mount lasers.
Midwest Industries official instructions are to file it down, in their written installation guide. I'm not disagreeing with you, I think hammering it in is better and it's the way zenitco does it. But I was curious and so checked.
@@chrompst i remember looking at the installation video scratching my head with that one. regardless of that the handguard is solid and holds zero i just hate how the front part of the rail is very picky on what lasers you can attach.
Just so everybody is aware, MI does make a 1913 adapter that is tang compatible. No cutting required. Specific receivers, but just so everybody doesn't think they need to bust out the Dremel.
How about putting a finish on the raw metal? That's a great place for rust and corrosion to appear. Great video, but don't forget the small things that make a great finished project.
Great video. Don't know if I would have used this particular AK for permanent mods. That was a nice Bulgarian 74 kit 😢
I was thinking the same
Why? Is it super rare or something?
@teensierpython-4565 One of the best ways to have a high quality 74, all the Bulgarian kits are completely gone and have become extremely rare and expensive.
Wrong gun to do it to! I wonder if the owner knows what it was worth before they destroyed it forever. 5.45 guns are bringing huge money and this is where the bubba with a Drexel comes in.
@@KLAYCO47but they wanted the best alpha ak…. So why not use a bulgarian? Its just a gun :p
Not really interested in installing an Alpha kit myself, but I stuck around for this whole vid because you made it pretty enjoyable to watch and informational. Well done Caleb. I’d love to see some more full length smith videos.
Exactly!!!
Heck yeah!
Tip: stuff a small cloth into the receiver during the dremeling/filing to prevent the metal dust and shavings from dropping into the receiver, fire control group and especially the chamber and barrel.
Compressed, or a shop vac will clear that stuff out pretty easily. Clothes have the potential to burn, it's a risk to be conscious of.
If you have any grease on those fire control parts for lube you will make grinding compound out of it! It will not simply blow out. You will have to detail strip and use brake clean or similar gun scrubber to get the grindings and contaminated lube out. Then relube it all again. A rag stuffed in there will be a major time saver!
Instant rust spot if not removed...
Easier to prevent than deal with later !!!
I personally would have removed the whole fire control group first and use painters tape to cover the bore. Metal shavings can be a bitch.
Working on guns is like therapy, but when you don’t have a gun to work on, watching a 1 hr long video from Brownells is my therapy😊
I know these are long to film but man if you guys can do more smithing videos that would be awesome!
I am surprised that they get away even with this and don't get strikes from TH-cam. They were giving them for people putting on suppressors... Don't say I like that, just saying they are one bud hurt idiot away from getting there channel deleted 😢
@@vladimirmihnev9702 I totally agree. This was the exact thought I had while watching this
Maybe because they are actually a business, they meet YTs guidelines
It helps that we don't monetize on YT
@@vladimirmihnev9702 They don't monetize their content, because they're a retailer. If you're a content creator and you want money from advertisers, then you need to meet stricter content guidelines.
I would also recommend if doing this installation to put some cold blue on the section of exposed metal and don't forget to use some oil and wipe off any excess oil before installing the rear 1913 Block. The cold blue will stop rust from occurring and the oil will neutralize the corrosive effect of cold blue. Same for the aluminum parts but instead you will use aluminum black followed by the oil and once again wipe off any excess.
I was going to suggest some little dobs of black primer paint.
It's an AK, its supposed to rust, it gives it that authentic finish.
@@BillyBob-ov5ef that's true but no sense in letting it rust early. Don't worry over time that will occur naturally
@@BillyBob-ov5efsave that sh!t for the memes. When you're out in the field, equipment failure is the last thing you need.
@seijiroukikuoka5975 you are probably a lot of fun at parties.
Equipment failure in the field, lol, what field are you talking about? The range, I hope. That stocks hinge is about as brittle as your sense of humor, the rust is the least of your problems.
Let's stop pretending these range toys do anything more than the occasional trip to the range.
Caleb is such a good instructor. Very easy to listen to and follow.
I appreciate the compliment. Thank you.
I couldn’t have said it better! Great video!
The Teacher
And that hair is on point!
@@CalebSavant Heck yeah. I have all the furniture you ordered headed to me for an ak build. I'm infinitely more confident and prepared with my Whippersnapper dremel and an old-school pillar file.
10/10 on the hair, that shit is straight glistening.
Caleb instructs like he has done hundreds of these. All of his instructions are easy to follow and very informative like a real class instructor. You NEED to make more gunsmithing videos as I will be building my own from scratch from now on. I just finished my first AR with all parts selected/installed by myself including the PnW for the muzzle device.
I love this. I wish the lords of TH-cam weren't so illogically opposed to this type of content, I could watch gunsmithing videos all day!
Cool to see Brownells doing some AK stuff.
Very useful video. I appreciate you showing how to do this rather than just showing finished products and describing them. Lots to learn here from a pro!
I love watching your gunsmithing videos. So mellow and instructive. You are the Bob Ross of guns.
I really appreciate his patience with the file, I would have taken the whole thing to the bench sander for 10 seconds and called it a day
Drill the third hole and make it an SBR next!
Probably the best instructional video I have seen. Very detailed and the way he instructs keeps it interesting. His demeanor and humor is what makes an hour video worth watching the whole thing. His suggestions and methods are exactly the best way to do it. I just outfitted my AK-74 with each of these upgrades and I am impressed at how solid it made my AK feel. Love Midwest Industries furniture. I have several of their products on multiple firearms that I own, especially their handguard so if your thinking about doing this to your AK then this is the video you want to watch. It is an excellent video.
I remember buying full Romy kits (barrel included) for $59.99 back in 05 ish (even the WASR 10s were $289.00). I still have all of my build jigs, 20 ton press, spot welder etc but the prices on kits have just been insanely expensive for many years now. It was fun building many different AKs and experimenting with different furniture like this but it's too expensive for me now.
I’ve been a gun owner for only 7 years now and I missed when AKs were sub $300 and SKSs were $100 :( just barely got my first AK recently
@Yeedo420
Oh man, Aks were so cheap. Even the top end, premium new ones topped out at about 600-650.
Even the old Mosin nagants were 79 fresh out of the box of cosmoline never used, now they are 400-450.
It's just crazy now
Absolutely love this type of content. Keep it up. My only critique of the install is leaving the bare metal under the 1913 adapter. If you live in a humid area that will start to rust pretty quickly and it's not an easy thing to see once it's assembled.
Rattle can can fix that or alumahyde.
Honestly I’d just do a magpul folding ak stock instead, as that’s likely more available
@@baker90338 less weight, as well as less expensive too.
@@ratagris21 that said, that rear weight might help balance it out somewhat, and that stock is highly adjustable.
Midwest Industries makes awesome AK accessories!!
When filing where debris can fall into the chamber area, I stuff a rag into the receiver to block it off. For example, in the case of the rear tang, I would stuff a rag to the receiver just behind where the hammer assembly is. Once done filing, invert the receiver (filed side down) and remove rag.
Caleb, Thank you for your Clear and calm teaching on this video & its always a pleasure to watch and see your gunsmithing/teaching. I too have built AR's, and started on building AK's. And the more know-how & Information is Key. Thank you again. Be safe & take care
"we could do a whole video on filing" is the most gunsmith thing ive ever heard lol. great video
I've watched 100's of gunsmithing videos and everyone is so heavy handed, they are very rough on guns, drives me nuts. I appreciate watching someone that is careful with all parts and how they are removed.
Even though this is as simple as removing the factory stuff, then reinstalling new stuff "essentially" the same, just with a few extra screws.....i still like these long, in depth videos. We need more of these.
Protip: Cover the vice jaws with painter's tape to prevent scratching any part clamped in the vice.They won't hurt grip.
I also use painters tape and cover areas that I don’t want to dremel, so if you accidentally mess up at least you can try to have a buffer
Was interesting to see what decisions Midwest made versus something like Zenitco. I really like the extra tensioning screws Midwest added to the handguard, great idea. Thanks for the cool video.
I was looking everywhere for a video a couple of weeks ago. I bought my first AK and got the complete Alpha setup. I really love the stock the most. But I had to watch this to see if he did it differently.
For anyone cringing like myself at the dremel work, which I know is necessary at times.. Midwest makes a version now so you dont have to cut the tang in the rear to gain your pic rail. Grabbing that one myself, the handguard just came in and im waiting on my dust cover from optics planet! Cant wait to do my swap, great video Caleb! 👍
More installation videos. Miss Steve. Also love Caleb. Great humor and comments from Caleb
What happened to steve?
AWESOME video... excellent job explaining exactly what to expect and reiterating being patient with fitting. I really miss my Fix It Stik set, unfortunately my garage was robbed and the thieves got away my most valued smithing tools. FIX It Stik makes it so much easier when working on your guns.
Keep up the great work and videos
That sucks but the nice thing about an Ak is that you dont need expensive tools to work on it. I did the same job for a buddy with cheap hand tools from home depot. I remember the first time filing down the furniture and thinking about how badly I didnt want to ruin his new gear. Hope you can recover your tools.
As a guy born and raised in Iraq glad to see this AKs 47 upgrades, our AKs used to be bear bone, inaccurate and beat up . Thank you Caleb for demonstrating these installations .
Step 1 and 2 👏🏼😎 safety first and the mark of a responsible savvy gun owner.
I have beautiful Nutmeg furniture on mine so I don't think I would ever convert it like this, but I really enjoyed watching the process. Very well presented. If I ever find myself in possession of a spare AK, this would be a cool kit to throw on.
Like the video. I do hope you normally have a handle of some kind on the file tang. Without one, the tang can be very dangerous!
Especially when using on Lathe etc.
That kit install was very thorough. Thank you.
I appreciate all the tips. I never thought about a file going one direction.
Yeaa that was the one tip I learned too lol cuz I sholl go forward n back when I file 😭🥶
That's an old piece of advice that I learned too in gunsmith school. Turns out, at least with modern files, it's no longer true. Fireball Tool built a machine to test this and the results were essentially the same between push and lift vs push and pull. It's a great video that you should check out. I've stopped lifting files on the back stroke except when I want a cleaner finish.
@StrongholdArmory interesting. Most of my tools, all the files, have been passed down to me so they are probably old school. Good to know!
@@StrongholdArmory Good to know. I simply don't put any downward pressure when pulling the file back.
For my KR-103 side folder, I had to relieve a small portion of the upper handguard cover to make room for the sling mount. About 1/8" x 1/8". I also had to fit the recoil spring locking tab to fit the rear trunion. It was about 0.003" too thick.
Thanks for sharing!
You talked about doing a whole video on filing. I got a whole semester of filing for two hours a day with a Holland & Holland repair shop gunsmith for an instructor. “Flat & square lads” is permanently engrained in my memory. I rarely pick up a rotary tool theses days.
A cool video! Not that I need an Alpha kit or an AK myself, but having a real technical video on this platform cannot be underestimated :) (Though I think a gas tube locked in place forever is not a good thing for an AK, but that has nothing to do with the quality of the video). It was just a pleasure to watch how Caleb was getting the job done!
didn't really liked the alpha stock but watched the whole video in regard of your perfection. Respect man
For such a nice ak, you should have put some sort of finish over the bare steel from the file, and maybe touched up the aluminum, however mostly the steel.
Otherwise, pretty sick, I am however a regular wood stock purist so that hurt to watch.
Awesome job, Caleb. No wonder you get paid the big bucks. Keep up the good work, sir.
Thanks for doing long form instructional AK content, it can sometime be hard to find depending on what you wanna do.
I wonder if Caleb knew how much these old AK74s go for on gunbroker before he cut off the stock tang… might’ve wanted to do that with a WASR instead. Ouch
It won't be a safe Queen. It will be carried and shot and enjoyed. I hear what you are saying but when you die you can't take it with you.
Tango Down AK grip is great especially since the length of pull on a lot of AK are a little short.
Awesome 👏🏽 not often we get to watch AK disassembly
You can always shove a rag in the open receiver to keep out a majority of the debris and an empty casing to plug the barrel
When I filed, I inserted a rag in the back of the receiver to keep out the shavings! Great video.
Cooking with AK Elvis. Awesome job man.
Good gunsmithing and good demonstration Caleb, thank you sir. The Alpha series looks awesome in my opinion.
You are the bob Ross of guns nothing. Love it!
looks nice but gas tube (one of main reasons of malfunction during continuous firing) became harder to reach for cleaning : have to deal with screws or handle it in same way as barrel. probably I will not take this to combat but still looks great
PLEASE DO A VIDEO ON FILEING!!! Cover it all! People really have no idea there are tons of different files. But most importantly, it's an absolute art to use one correctly.
My tip is use plenty of tape around where one will be dremeling. It will help with giving at least a tiny bit of protection to metal you don't want to remove, and it provides some good guidelines with good contrast. If you are very concerned about cutting into a base metal I will actually put a piece of sacrificial sheet metal stock between .010 and .030 thick on the part, then wrap that in the tape. That way if I do nick the tape, there will be some response. Especially if it's brass or something.
We did this to a couple Bulgarian and a Valmet over the years. We never advise the customer to not make modifications to a "valuable" gun. Value is ALWAYS determined by the owner.
Cool I actually have that dremel . My only complaint was it to bulky for precision surgical use . I didn't know that accessory was a option or avaliable. Now after the video I'm pricing one . Cool AK upgrade. I'd love to Try this modification. Looks awesome.
The folding dust cover was a nice upgrade. Dont really care for the stock. Great video guys.
Filing backwards doesn't dull the file. It's been proven on another amazing TH-cam channel
Bro looks like he was born in 47 with that hair cut lol
You’re awesome man, very informative to the point, respectful and patient with your craft. I really appreciate that, no rushing making sure you’re points are clear enough for the people in the back to hear it clearly. Great tutorial! 🙏🏽💯🤘🏽
Great, easy to follow upgrade video. I want to see you shoot it now
I’m not an AK person but the way you did the instrumental video made me want to check out the whole thing and look for other gunsmithing videos of your. Good work young man!
They also have picatiny adapter for fixed tang , where you don't have to cut it. I just got Samson adapter, it was cheaper
That was an absolute joy to watch. Super cool! More more more! Lol. Gunsmith an AK bayonet lug onto a AK that didn't come with one on the gas block. Like the Yugo M70 where they didn't come with the legit gas block with bayonet lug and nade launcher sight.
the haircut and the leather over the plaid told me everything i need to know. i’d trust this guy with my life
Great Job Caleb. Just need Steve in the background making fun comments while drinking coffee
Steve and I literally joked about that 😅
That was really great to watch. Thank you for putting in the time.
Really cool video guys and informational. Caleb is a good presenter too
Nice video. I would love to see this type of conversion done on the Zastava M70.
Midwest industries makes a Tang compatible 1913 adapter for the alpha stock😊
The MWI top cover is amazing.
I probably don’t want to modernize an AK, but I liked watching this video haha
Yeah, if you ask me, they are not worth modernizing
Great video, I'm looking at getting the handguard setup for my 74
Another excellent video from Caleb and Brownells! Thanks man!
That is one nice ak after the upgrades , thank Caleb for this video , clear instructions , section by section break down and most of all … patience 😂 something I’ll work I. . 👍🤙🤣
Finding this video was super helpful and made the process of converting my own AK a lot easier. thanks a ton!
It's a great opportunity to once again appreciate the brilliant design by Mikhail Kalashnikov RIP.
Nice work love it ! Where can I get that tool set with the torque adapter ? Thank you for the video.
Man those torque wrench T-handles are sick.
"Once we cut it off, that's it, it's cut off." Are words that really resonate with me for some reason.
Circumcision of the AK.
Looks good 👍 i got my AK from Zastava already modernized. 7.62x39 is awesome from a modern AK
Nice to know that my AK goes to a good home once Mechanic gets his hands on it
You best be careful of those dremel sparks around that all that hair grease 😂
I really enjoyed this video. You make it interesting to learn.
Miss you at Jim’s, take care!!!!
I need one of the Alpha 47’s in my life.
This implies some maker will do a Beta AK soon lol
@@hughgrection3052don't forget the Sigma AK. The one that doesn't follow the aesthetic normalities.
@ratagris21 Well Sigmund Freud should say there's significant signs of Sigma starting with the AK showing signs of stigmata! Hehe.
Next I guess will be the Omegas?
@@hughgrection3052 🤔
I would've done some blueing on the steel after I finished filling for the 1913 adapter.... IF I would've, but I currently drooling over having such a nice AK parts kit
Put a handle on that file and you'll get a lot more real estate to file with. I like using old golf balls for file handles, they fit in the palm nicely.
Yup, I have been doing it for years. You can drill different sized hole in different areas for use on several different size files if your short on golf balls.
Caleb, Outstanding video and instruction. Thank you for this!!!
Gonna take a look if MI is making kits for RPK74 as well.
I’d do this to a century arms or any other American made AK but not an authentic com-bloc AK or non matching kit. Very educational ofc, I would like to consider this in the future.
There are some good stock adapters out there these days that don't require sawing the back of your prize AK off. The sighting mounting system may be interesting tho.
Great video! I hope to convert mine this weekend.
Great 👍 keep up the good job. I wish if you are able to make a video of shortening the Ak47 and how to color plating it. Thanks
very well explained. thanks! pls more like this one.
I love everything except when he filed the handguard to fit it. The whole point is too hammer the handguard in so it friction fits to the weapon allowing rigidity to mount lasers.
Midwest Industries official instructions are to file it down, in their written installation guide. I'm not disagreeing with you, I think hammering it in is better and it's the way zenitco does it. But I was curious and so checked.
@@chrompst i remember looking at the installation video scratching my head with that one. regardless of that the handguard is solid and holds zero i just hate how the front part of the rail is very picky on what lasers you can attach.
The hair…and build quality is top notch 🤙. You sir, give us bubba’s proof that it can be done properly 👌🏼🏴🦍
Can you provide information on your tool kit please. Great video, thanks for sharing!
Wheres the Gearbox and the Hopup chamber?
😂😅 just Kiddin..!!
Great video.. Love it all the way.. 😊😁
Thank you for the tutorial. How about a little cold blue on the files down tang to protect from corrosion?
Just so everybody is aware, MI does make a 1913 adapter that is tang compatible. No cutting required. Specific receivers, but just so everybody doesn't think they need to bust out the Dremel.
How about putting a finish on the raw metal? That's a great place for rust and corrosion to appear. Great video, but don't forget the small things that make a great finished project.