Before CAMMING your 5.7 watch this video!
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Today I’ll be sharing some info on what to expect when installing a camshaft along with mpg and drivability and answering some questions that you might have so stay tuned! #cammed5.7 #raminfo #dragracing #moparornocar #5.7rams #compcams #hrtstage2 #greeneracing
LethalRacing store website www.shoplethal...
Literally thinking about it then I see this video pop up…. The universe is energy bro
Glad I came just in time! Woke up and this topic came into my mind haha
I'm gettin a Stage 3 Boosted Texas Speed cam on my 5.7 with a Vortech Super Charger. Satera Tuning is installer and they do remote tunes and E85 conversion
Idc how long it takes I just hope I do everything correctly 🙏thx for the vid
Has anyone had a problem with the Rams cam gear/phaser being smaller than the cam snout ?? Doing a engine swap in the wife's Ram and I have the crank Phaser/wheel changed already now the cam is different?? I'm a mechanic have been for years ...thus is my 1st hemi build cam anyone help
Unfortunately the hemi doesn’t blurp the way an LS does. I’ll probably save this for last
Yes it does, you just need to spec the right cam. Texas Speed BFD cam has a nasty chop right off the shelf.
hemi heads flow a lot more so you have to be careful so you don't kill low rpm power.
can you tell me all the parts i would need to purchase for the cam upgrade?
You said get a stock converter? Why? Or should I get a lock up converter?
No you can use the stock converter for daily driving and racing, but the cam will really benefit from a performance converter
Yo so ik nothing about parts, I have a 2013 dodge ram, I want to get it cammed, so I have to get it tuned and a converter for it too? Also wym by tuned?
Yes tune is required to have a aftermarket cam work properly Id get with Jay Greene racing on Facebook or flying Ryan performance they got all the parts you need
Aye man thank you for the video I know nothing about cam. I just want my ram chopping a little. What kit do you recommend for daily driving I don’t race often. Much appreciated primo 🙏🏼
Appreciate the feed back bro! I would look into Amsracing website and see what cam kit to go with they tell you in the description what it’s meant to drive for and I believe they have a chopping option
Thx kidd. MOPAR2YA
Damn someone told me they wanted 1600 to get his ram cammed. Now you saying 3-5k😮
Depends if your really cool with the mechanic, but ever since inflation the prices have gone up significantly
that 1600 probably just labor lol
Good vid bro, I don’t know shit about a cam what would I need to cam my stock hemi?
Camshaft/hellcat lifters/gaskets/valve springs/custom tune
See u in west Dallas should have caught up for a run
Are you going to yellow belly anytime soon ?
@@lethalracing5.7 haven't been in years lol
@@rsanchezeightyone let me know when you want to do a couple of runs I’d be down for that haha
I am wanting to put a good choopy cam but I have a 2017 dodge 2500 it has a 6 4 hemi can you point me in the right direction and some one that can Tune it I am out of Tallahassee Florida
I would check out moes performance recently added no springs required camshaft
El chapo cam is pretty impressive
I’m in Tallahassee to lol. If you see a yellow and black ram dats me.
Do you or anyone have any suggestions on a similar camshaft for a 2005 5.7L Hemi the pre Eagle I was told that the 6.4L camshaft won’t work in a pre eagle so I need to know what the equivalent 6.4L Cheap camshaft is for my 5.7 Hemi funds are tight so I need the cheapest camshaft with the power and not changing the torque converter for my 2005 RT Magnum Thanks for any advice and suggestions and tips and even parts that you might have for sale. Thanks again
I’m currently installing stage 4 mod and got the mds delete kit do I need to tune my truck? To daily drive it ?
Yes you will need a custom tune for any performance cam upgrade
any problem with comp cam kit yet. i heard valve springs break
No problems and valve springs don’t really break on 4gen rams
If you cammed a 2006 5.7 hemi what stage cammed should I use
Stage 9
Did you go to a shop or did it yourself?
Mechanic did
Why hood pins ?😂
Yo I got a 5.7 charger im trying to cam with headers. I’m in Austin do you know of any shops out here that will do it?
No I’m from Fort Worth but you can try to contact moes performance on Facebook
@@lethalracing5.7 thanks man
Where you located bro
Fort Worth TX.
Bro did you have to change or replace the springs n push rods?
Only cam you don’t have to would be the stage 1 hrt from comp cams push rods are not required but recommended
Only cam you don’t have to would be the stage 1 hrt from comp cams push rods are not required but recommended
hey bro should i use 5W-40 or 0W-40 oil on a 5.7 hemi grind camed?
5w30 should be good no need to do a drastic oil change
ok thanks alot i was just asking because i traded on my old truck for a full cuatomed ram 5.7 and i forgot to ask the person what oil he used
oh and also bro the truck is really modified look at all the things that it has Custom grind cam
Polished Heads
Hellcat lifters
Hellcat oil pump
6.4 fuel rail and injectors
6.4 intake manifold
Hardened Push Rods
Custom tune
Fresh new built transmission
3,400 torque converter
]HC 4/6 drop
4 link relocation brackets
Carbon Fiber Steering Wheel
Leather seats
Center console
Full exhaust
Ported Throttle body by (454 chuy)
2013 + sport front end conversion
6.4 k&n active
J' air intake
Did you have a low oil pressure issue after cam before tune?
Truck reads 23 at idle 45 driving and 68 gunning it
@@lethalracing5.7 I just did mfs delete on my 11 durango citadel with the 5.7 and put a non mfs 6.4 cam, lifers and upgraded springs. My issue is when I start it it idles for about a minute and pressure drops to zero. No ticking until the oil pressure goes to zero and sensor shuts fuel pump off. Ever have this issue?
Mds*
Haven’t gotten it tuned yet
@@brandonurgez8846bro I read that as “I just did motherfuckers delete” 😂
Can you put the link to where you got your cam? I want one but just for daily and the chop mostly lol
Go to Amsracing.com you’ll find the camshaft your looking for.
Not the link I sent tho go to google