Thank you, thank you, thank you....we just spent three days chasing the exact issue. We basically have an entire new fuel system, including new lines, filters, pumps and injectors. We even have a cleaned and scrubbed fuel tank. I cannot believe we missed the fuel filter seal gasket. We don't feel we wasted our time as all the parts replaced were needed. However, you saved the day. Well done and well presented. We thank you and our JCB 1400B w/ Perkins 4.236 thanks you for getting her out of the shop. AAA+ ratting for you.
So I have the same exact machine, and for the past few days we’ve been having problems with my chipper shutting off after using it for about 15-20 mins after getting hot, while shutting of the oil light comes on, the chipper has oil and is full, cleaned the radiator and all that good stuff out. Not sure what could be the problem, the injection pump is leaking a little bit but starts and runs fine until it gets hot.
I'm looking to change the hydro oil on my bc1250. Do I drain the oil from the lowest part of the system I.E. where the hose meets the Piston for the curb side swivel? Any info would be greatly appreciated.thank you
yep , its a stupid filter design. The o ring washer needs to go up inside the housing real secure, not on the top groove of the filter. I know that o ring fits right on the top of the filter but it shuts off supply ! Ask me how i know ! LOL I spent a full day in 16 degree snowy weather playing with it !! Felt so goofy once i realized what it turned out to be !!
Thank you, thank you, thank you....we just spent three days chasing the exact issue. We basically have an entire new fuel system, including new lines, filters, pumps and injectors. We even have a cleaned and scrubbed fuel tank. I cannot believe we missed the fuel filter seal gasket. We don't feel we wasted our time as all the parts replaced were needed. However, you saved the day. Well done and well presented. We thank you and our JCB 1400B w/ Perkins 4.236 thanks you for getting her out of the shop. AAA+ ratting for you.
So I have the same exact machine, and for the past few days we’ve been having problems with my chipper shutting off after using it for about 15-20 mins after getting hot, while shutting of the oil light comes on, the chipper has oil and is full, cleaned the radiator and all that good stuff out. Not sure what could be the problem, the injection pump is leaking a little bit but starts and runs fine until it gets hot.
What a wild goose chase 😂
Much frustration on hot days touble shooting. Tested my vocabulary 😂
Im having trouble identifying an older four cylinder Perkins on an old wood chipper
Lots of info, thank you
Tony Baker YVW
Is there any chance you can get ahold of me so I can ask questions about my machine?
I'm looking to change the hydro oil on my bc1250. Do I drain the oil from the lowest part of the system I.E. where the hose meets the Piston for the curb side swivel? Any info would be greatly appreciated.thank you
Did you have to bleed the injectors to start your machine? I learned a lot of filter places from your video. Thanks.
Yes i did have to prime the injectors and fuel system. Glad you got something out of the vid.
yep , its a stupid filter design. The o ring washer needs to go up inside the housing real secure, not on the top groove of the filter. I know that o ring fits right on the top of the filter but it shuts off supply ! Ask me how i know ! LOL I spent a full day in 16 degree snowy weather playing with it !! Felt so goofy once i realized what it turned out to be !!
helpful
Im having trouble identifying an older four cylinder Perkins on an old wood chipper
I've already looked online in the visible location it offered can unsure of the year model chipper
I've already looked online in the visible location it offered can unsure of the year model chipper