🛒Links to all the products FrSky URUAV X9 Lite PRO - bit.ly/2LxmFS1 Taranis X9D Plus SE 2019 - bit.ly/2Lxp0MN R9M Lite PRO Module - bit.ly/2LFjKHg URUAV TMX5 Lite Module - bit.ly/2Ls0ywc XJT Lite Module - bit.ly/2LwBB2Z X9 Lite Grip Pads - bit.ly/2LwNRAo X9 Lite Charging Board - bit.ly/2LCrsBG 💲 Get the latest exclusive coupon codes - bit.ly/2SWdMVD 📺 X9 Lite video - th-cam.com/video/8zUjdRZiAf4/w-d-xo.html 📺 X-Lite PRO video - th-cam.com/video/OAeqYmKmLko/w-d-xo.html
The reason why the standard and Uruav Pro feels the same is because they both use the same gimbal construction, only the sensor is different. Sensor isn't the whole story on why hall gimbal feels better. The hall gimbal on Frsky products are upgraded aluminium CNC with better bearings, racheting and spring mechanism and that's mainly the reason why it just feels better.
Is there no need to click the ‘lua’ build option anymore? It’s still a check box on the radio profile menu tab (video @9:23). I do see multi protocol and ‘luac’ have been removed
multi and luac are built-in now... no need to check it.... you get crossfire, luac, and multi automatically now... no need for lua when luac is built-in
Just out of curiosity while you were flicking through the eternal RX mode after update you said multi flysky does that mean you can use a flysky RX on that radio now ? Or you need a flysky module on the back?
Great tutorial for all interested. 👍 Well as usual of cause from this channel. Quick question: how is this grip stickers feels. Looks like it's just simple vinyl stickers. Does it has any grips? I'm missing rubber grips fro my QX7S.
I just received a new X9D 2019 for a customer, Im guessing I have to do the same thing to be able to run crossfire? Are the Nightly builds firmware safe to use, I have never tried it, and know nothing about it. I appreciate everything you do. Thanks Albert
Yes, same procedure and now the official release is out so no longer a nightly build. The same procedure applies so that's why I'm not making another video.
@@AlbertKimTV is this radio really worth it if not i can upgrade to a better one can u be honest with me albert and tell me wich one do you sugest is it worth investing on crossfire and getting a better radio or go with tango 2 tbs?thanks ✌
Albert, I updated my firmware to the nightly build last week and have been enjoying using my multi protocol module but I don't know why the spectrum analyser has vanished, do you have any ideas that could help clear this up. Granted I haven't used said analyser or know when I will ever need to use it but the fact it's vanished is just weird. I do love the feel of the X9 Lite Pro as my hands no longer cramp up after flying for an hour and the gimbals feel so smooth it put my crappy Turnigy 9XR Pro to shame as the gimbals on the 9XR Pro were so rubbish they failed in less than 4 months and started doing their own thing which made using it dangerous, so I'm hoping this X9 is going to be the last radio I ever have to buy or at least last about 3-5 years before any money is needed to be spent. Keep up the great videos as I've learnt a few things from you that have been of great help
I got uruav tmx5 for review from banggood, but my problem is i cant update my x9 lite to opentx 2.3 nightliess,,if you already have the correct firmware to enable Multiprotocol on my x9 lite, please let me know how 🙏 Especially, how to update nightliess firmware from sd card content, i tried but not working :(
Ive got a qx7 access. Tried to open it to mod for the inverter but the board is different. Do I still need mod it to use crossfire?? Help needed. Thank you 😊
Hi do you know if I'll lose my d8 in my old xlite on the updating , if I got the crossfire add on please, I have a load of d8 whoops I don't want to lose, should I just buy the tango 2 aswel
Having issues with the nightly build on my x9lite. When I turn it on it starts at the nightlywarning screen. After I push any button it vibrates and flashes the same screen and is completely unresponsive and won't even turn off. I've never updated firmware before though I just ran the stock firmware on my old xlite so im sure I messed up something.
No, they disabled it since it's not ACCESS compatible and they won't let you update the firmware. You have to buy the new 2019 modules which don't seem any different, just more expensive.
The only issue with frsky is that they are getting greedy, they chose to basically start locking down their radios and its gonna ruin them. I love their old school designs but I like my radio to be as open as possible so if I change stuff I don't need to keep buying radios..
🛒Links to all the products
FrSky URUAV X9 Lite PRO - bit.ly/2LxmFS1
Taranis X9D Plus SE 2019 - bit.ly/2Lxp0MN
R9M Lite PRO Module - bit.ly/2LFjKHg
URUAV TMX5 Lite Module - bit.ly/2Ls0ywc
XJT Lite Module - bit.ly/2LwBB2Z
X9 Lite Grip Pads - bit.ly/2LwNRAo
X9 Lite Charging Board - bit.ly/2LCrsBG
💲 Get the latest exclusive coupon codes - bit.ly/2SWdMVD
📺 X9 Lite video - th-cam.com/video/8zUjdRZiAf4/w-d-xo.html
📺 X-Lite PRO video - th-cam.com/video/OAeqYmKmLko/w-d-xo.html
The reason why the standard and Uruav Pro feels the same is because they both use the same gimbal construction, only the sensor is different. Sensor isn't the whole story on why hall gimbal feels better. The hall gimbal on Frsky products are upgraded aluminium CNC with better bearings, racheting and spring mechanism and that's mainly the reason why it just feels better.
Awesome, Albert! Great job and review! 😃
Finally looks like FrSky is going back on tracks...
Many of these transmitters are going to be on sale starting on 9/9 through 9/13. Check the spreadsheet link in the description.
Is there no need to click the ‘lua’ build option anymore? It’s still a check box on the radio profile menu tab (video @9:23). I do see multi protocol and ‘luac’ have been removed
multi and luac are built-in now... no need to check it.... you get crossfire, luac, and multi automatically now... no need for lua when luac is built-in
@@AlbertKimTV Thanks!
Thank you so much for this tutorial!! Happy Flying!
You're very welcome! Glad it was helpful!
Does the access Qx7s require the crossfire mod to run at full 400k baud?
Yes
just did a crsf mod on mine today works good
Would you be willing to share your sources on that?
Very informative and helpful video. Thanks Albert 🤓
Thanks
Which external module do you need to use D8 mode?
You can use either one of these
URUAV TMX5 Lite Module - bit.ly/2Ls0ywc
XJT Lite Module - bit.ly/2LwBB2Z
Hi Albert.
Thanks for your helpful feedback.
Will the XJT Lite fit the X9D plus SE 2019?
Thanks for the video. Hi from Turkey.
Hey albert can you make a range test video with xm+? x9lite Vs qx7/xlite/x9d tx thanks
Just out of curiosity while you were flicking through the eternal RX mode after update you said multi flysky does that mean you can use a flysky RX on that radio now ? Or you need a flysky module on the back?
You need that multiprotocol module I showed earlier in the video.
Great tutorial for all interested. 👍 Well as usual of cause from this channel.
Quick question: how is this grip stickers feels. Looks like it's just simple vinyl stickers. Does it has any grips?
I'm missing rubber grips fro my QX7S.
I just received a new X9D 2019 for a customer, Im guessing I have to do the same thing to be able to run crossfire? Are the Nightly builds firmware safe to use, I have never tried it, and know nothing about it. I appreciate everything you do. Thanks Albert
Yes, same procedure and now the official release is out so no longer a nightly build. The same procedure applies so that's why I'm not making another video.
@@AlbertKimTV Thank you!
i noticed that under tools it has differant options now like crossfire setup and others not sure how that all works yet
Hey Albert I have the same setup but I am not getting the nightly warning on startup, yet I’m able to use crossfire. Should I be concerned?
Maybe you're using a newer nightly or the RC1 version perhaps? I think you're probably OK.
Albert Kim Im still trying to get it to work properly. I had a failsafe today 😔
I cant bind to my betafpv85xhd i updated to open t x latest version 2.3.11 and still have issues...
Crossfire receiver on the 85x HD? Confirmed you have the crossfire option enabled in the firmware options as shown in 11:03 mark of the video?
@@AlbertKimTV no crossfire,i have the frsky fcc and i really like this radio put it wont bind i spend hours trying to make it work i gave up really!!
@@AlbertKimTV i tried everything on my pc also with betaflight and no signal...
@@AlbertKimTV is this radio really worth it if not i can upgrade to a better one can u be honest with me albert and tell me wich one do you sugest is it worth investing on crossfire and getting a better radio or go with tango 2 tbs?thanks ✌
Albert, I updated my firmware to the nightly build last week and have been enjoying using my multi protocol module but I don't know why the spectrum analyser has vanished, do you have any ideas that could help clear this up. Granted I haven't used said analyser or know when I will ever need to use it but the fact it's vanished is just weird. I do love the feel of the X9 Lite Pro as my hands no longer cramp up after flying for an hour and the gimbals feel so smooth it put my crappy Turnigy 9XR Pro to shame as the gimbals on the 9XR Pro were so rubbish they failed in less than 4 months and started doing their own thing which made using it dangerous, so I'm hoping this X9 is going to be the last radio I ever have to buy or at least last about 3-5 years before any money is needed to be spent.
Keep up the great videos as I've learnt a few things from you that have been of great help
Not sure about the analyzer. Have you tried sending a message to the devs?
I have install newer version of open-tx then Albert used on his video and my spectrum analyzer work just fine.
Hi! What is good? Crossfire or r9m lite pro? I need range 3-5km on 100-200mw
Crossfire
@@AlbertKimTV will this protocol work for any crossfire module?
which version of the firmware should I use for the x9d plus se?
Select the X9D Plus in the drop down menu... it's basically the same as the regular version
I got uruav tmx5 for review from banggood, but my problem is i cant update my x9 lite to opentx 2.3 nightliess,,if you already have the correct firmware to enable Multiprotocol on my x9 lite, please let me know how 🙏
Especially, how to update nightliess firmware from sd card content, i tried but not working :(
It doesn't work reliably from SD card which is why I used my PC.
If internal and external receivers are turned on, does something break?
As usual ,very user friendly,,,,,,,
Ive got a qx7 access. Tried to open it to mod for the inverter but the board is different. Do I still need mod it to use crossfire?? Help needed. Thank you 😊
Did you solve it yet? Having the same issue and don't know what to do :(
MR YO LP actually for qx7 access they said no need to do the mod. Mine has been working great for a month now.
@@potatothumbsfpv1294 Do you use crossfire with the baudrate of 400000?
Some people say there are still telemetry and lua issues :/
MR YO LP mine works fine using the xfire lite module
MR YO LP i just plugged it in did nothing really on the taranis. Didnt change baudrate etc. I works fine
Hi do you know if I'll lose my d8 in my old xlite on the updating , if I got the crossfire add on please, I have a load of d8 whoops I don't want to lose, should I just buy the tango 2 aswel
If you upgrade to ACCESS firmware, D8 will be gone.
@@AlbertKimTV thankyou yeah scrap that idea then, I'll slowly get othe bits to get crossfire, cheers
Ok my x9d+has 2015 and has xjt. Just had to flash it to get cross fire
Hi Albert
I have tried this on my x lite pro now I have no back light working. Is it a bug in the firmware.
Having issues with the nightly build on my x9lite. When I turn it on it starts at the nightlywarning screen. After I push any button it vibrates and flashes the same screen and is completely unresponsive and won't even turn off. I've never updated firmware before though I just ran the stock firmware on my old xlite so im sure I messed up something.
Have tried flashing it again? Tried a different USB cable?
do i need to buy an external thing or just update it? to run crossfire
I don't know either, I think the crossfire nano tx module works without any upgrades just plug and play but I'm not sure
Can use it r9m module? (X9 lite + r9m=?)
No, they disabled it since it's not ACCESS compatible and they won't let you update the firmware. You have to buy the new 2019 modules which don't seem any different, just more expensive.
I remixed a jr module bay for this if anyone needs it just search Thingiverse for x9 lite.
I don’t see crossfire when i hold the menu button down so i can bind my crossfire receiver new to this sorry
Do you get the full capability of crossfire with this method? latency, range, etc.
Work in qx7 acces 2019 ?
If you get the firmware for the QX7 it should work.
Thank you sir. :D
The only issue with frsky is that they are getting greedy, they chose to basically start locking down their radios and its gonna ruin them. I love their old school designs but I like my radio to be as open as possible so if I change stuff I don't need to keep buying radios..
bravo grazie di tutto
I use Linux :P
yes people use linux...