Update, and a clue from another comment. On my 2018 you have to hold the M & S buttons down and switch the high beam headlights on and off "4" times. Interesting fact, I let go of the M & S buttons before switching off the ignition, but it still reset.
You can't reset the maintenance without BUDS on 2016 and prior. But on 2017 and newer, it is possible. To erase the MAINTENANCE REQUIRED message, proceed as follows: 1. From main display (vehicle speed), press SET and HOLD. 2. Alternate between LOW beam and HIGH beam 3 times. NOTE: Step 2 must be completed within 2 seconds. 3. Release SET button
Update, and a clue from another comment. On my 2018 you have to hold the M & S buttons down and switch the high beam headlights on and off "4" times. Interesting fact, I let go of the M & S buttons before switching off the ignition, but it still reset.
Thanks, that worked on my 2019 HD10 also.
Well crud. I have a 2018 and I can't get this to work. Any idea's?
thanks this work on my 2013 Can Am Commander 800
Thank you
I’ve got a 2016 model, I don’t have those buttons. Any ideas?
This is in the manual under the instrument section. Be aware that the 5 sec time is more like 2!
I have the other display on hd8 how does that work
We can’t get it to work for our 2016 defender
Do your lights work specifically, your brights? You might have to try a couple times and everything has to be done perfect.
brother what is the procedure for an outlander 800 2009 help
Unfortunately before 2016 you can't reset maintenance message.
can u do one to remove the check engine light
You need to see why your engine light is on. When you fix the problem the light will go off. Here is a video th-cam.com/video/qC7_drITIU8/w-d-xo.html
Y cuál es el procedimiento para la outlander 450 2019 de antemano muchas gracias
Does it work on an outlander??
Misael Perez I have never got it to work on any of mine, but they are 16s so maybe for the 17s it would work. The defender in this video is a 17.
You can't reset the maintenance without BUDS on 2016 and prior. But on 2017 and newer, it is possible.
To erase the MAINTENANCE REQUIRED message, proceed as follows:
1. From main display (vehicle speed), press SET and HOLD.
2. Alternate between LOW beam and HIGH beam 3 times.
NOTE: Step 2 must be completed within 2 seconds.
3. Release SET button
yes, worked on mine 2017 450 outlander, the one cited by Coast800, if you go to EH do the lights flipin, then you get codes if any.
@@Coast800 Thanks!!!! worked on my 2017 450 outlander.
@@Coast800 Thank you sir. Worked on my 2017 outlander 570
You cycled 4 times on the headlights
Thanks my manual says to just hold the S button
I tried that and it would never work. Does it work for you?
Had to replace my headlight switch for it to work